Logo Search packages:      
Sourcecode: linux version File versions  Download package

ebony.c

/*
 * Ebony board specific routines
 *
 * Matt Porter <mporter@kernel.crashing.org>
 * Copyright 2002-2005 MontaVista Software Inc.
 *
 * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
 * Copyright (c) 2003-2005 Zultys Technologies
 *
 * This program is free software; you can redistribute  it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 */

#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/reboot.h>
#include <linux/pci.h>
#include <linux/kdev_t.h>
#include <linux/types.h>
#include <linux/major.h>
#include <linux/blkdev.h>
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/ide.h>
#include <linux/initrd.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/tty.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
#include <linux/serial_8250.h>

#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/dma.h>
#include <asm/io.h>
#include <asm/machdep.h>
#include <asm/ocp.h>
#include <asm/pci-bridge.h>
#include <asm/time.h>
#include <asm/todc.h>
#include <asm/bootinfo.h>
#include <asm/ppc4xx_pic.h>
#include <asm/ppcboot.h>
#include <asm/tlbflush.h>

#include <syslib/gen550.h>
#include <syslib/ibm440gp_common.h>

extern bd_t __res;

static struct ibm44x_clocks clocks __initdata;

/*
 * Ebony external IRQ triggering/polarity settings
 */
unsigned char ppc4xx_uic_ext_irq_cfg[] __initdata = {
      (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),      /* IRQ0: PCI slot 0 */
      (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),      /* IRQ1: PCI slot 1 */
      (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),      /* IRQ2: PCI slot 2 */
      (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),      /* IRQ3: PCI slot 3 */
      (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),      /* IRQ4: IRDA */
      (IRQ_SENSE_EDGE  | IRQ_POLARITY_NEGATIVE),      /* IRQ5: SMI pushbutton */
      (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),      /* IRQ6: PHYs */
      (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),      /* IRQ7: AUX */
      (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),      /* IRQ8: EXT */
      (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),      /* IRQ9: EXT */
      (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),      /* IRQ10: EXT */
      (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),      /* IRQ11: EXT */
      (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),      /* IRQ12: EXT */
};

static void __init
ebony_calibrate_decr(void)
{
      unsigned int freq;

      /*
       * Determine system clock speed
       *
       * If we are on Rev. B silicon, then use
       * default external system clock.  If we are
       * on Rev. C silicon then errata forces us to
       * use the internal clock.
       */
      if (strcmp(cur_cpu_spec->cpu_name, "440GP Rev. B") == 0)
            freq = EBONY_440GP_RB_SYSCLK;
      else
            freq = EBONY_440GP_RC_SYSCLK;

      ibm44x_calibrate_decr(freq);
}

static int
ebony_show_cpuinfo(struct seq_file *m)
{
      seq_printf(m, "vendor\t\t: IBM\n");
      seq_printf(m, "machine\t\t: Ebony\n");

      return 0;
}

static inline int
ebony_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
{
      static char pci_irq_table[][4] =
      /*
       *    PCI IDSEL/INTPIN->INTLINE
       *       A   B   C   D
       */
      {
            { 23, 23, 23, 23 },     /* IDSEL 1 - PCI Slot 0 */
            { 24, 24, 24, 24 },     /* IDSEL 2 - PCI Slot 1 */
            { 25, 25, 25, 25 },     /* IDSEL 3 - PCI Slot 2 */
            { 26, 26, 26, 26 },     /* IDSEL 4 - PCI Slot 3 */
      };

      const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
      return PCI_IRQ_TABLE_LOOKUP;
}

#define PCIX_WRITEL(value, offset) \
      (writel(value, pcix_reg_base + offset))

/*
 * FIXME: This is only here to "make it work".  This will move
 * to a ibm_pcix.c which will contain a generic IBM PCIX bridge
 * configuration library. -Matt
 */
static void __init
ebony_setup_pcix(void)
{
      void __iomem *pcix_reg_base;

      pcix_reg_base = ioremap64(PCIX0_REG_BASE, PCIX_REG_SIZE);

      /* Disable all windows */
      PCIX_WRITEL(0, PCIX0_POM0SA);
      PCIX_WRITEL(0, PCIX0_POM1SA);
      PCIX_WRITEL(0, PCIX0_POM2SA);
      PCIX_WRITEL(0, PCIX0_PIM0SA);
      PCIX_WRITEL(0, PCIX0_PIM1SA);
      PCIX_WRITEL(0, PCIX0_PIM2SA);

      /* Setup 2GB PLB->PCI outbound mem window (3_8000_0000->0_8000_0000) */
      PCIX_WRITEL(0x00000003, PCIX0_POM0LAH);
      PCIX_WRITEL(0x80000000, PCIX0_POM0LAL);
      PCIX_WRITEL(0x00000000, PCIX0_POM0PCIAH);
      PCIX_WRITEL(0x80000000, PCIX0_POM0PCIAL);
      PCIX_WRITEL(0x80000001, PCIX0_POM0SA);

      /* Setup 2GB PCI->PLB inbound memory window at 0, enable MSIs */
      PCIX_WRITEL(0x00000000, PCIX0_PIM0LAH);
      PCIX_WRITEL(0x00000000, PCIX0_PIM0LAL);
      PCIX_WRITEL(0x80000007, PCIX0_PIM0SA);

      eieio();
}

static void __init
ebony_setup_hose(void)
{
      struct pci_controller *hose;

      /* Configure windows on the PCI-X host bridge */
      ebony_setup_pcix();

      hose = pcibios_alloc_controller();

      if (!hose)
            return;

      hose->first_busno = 0;
      hose->last_busno = 0xff;

      hose->pci_mem_offset = EBONY_PCI_MEM_OFFSET;

      pci_init_resource(&hose->io_resource,
                  EBONY_PCI_LOWER_IO,
                  EBONY_PCI_UPPER_IO,
                  IORESOURCE_IO,
                  "PCI host bridge");

      pci_init_resource(&hose->mem_resources[0],
                  EBONY_PCI_LOWER_MEM,
                  EBONY_PCI_UPPER_MEM,
                  IORESOURCE_MEM,
                  "PCI host bridge");

      hose->io_space.start = EBONY_PCI_LOWER_IO;
      hose->io_space.end = EBONY_PCI_UPPER_IO;
      hose->mem_space.start = EBONY_PCI_LOWER_MEM;
      hose->mem_space.end = EBONY_PCI_UPPER_MEM;
      hose->io_base_virt = ioremap64(EBONY_PCI_IO_BASE, EBONY_PCI_IO_SIZE);
      isa_io_base = (unsigned long)hose->io_base_virt;

      setup_indirect_pci(hose,
                  EBONY_PCI_CFGA_PLB32,
                  EBONY_PCI_CFGD_PLB32);
      hose->set_cfg_type = 1;

      hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);

      ppc_md.pci_swizzle = common_swizzle;
      ppc_md.pci_map_irq = ebony_map_irq;
}

TODC_ALLOC();

static void __init
ebony_early_serial_map(void)
{
      struct uart_port port;

      /* Setup ioremapped serial port access */
      memset(&port, 0, sizeof(port));
      port.membase = ioremap64(PPC440GP_UART0_ADDR, 8);
      port.irq = 0;
      port.uartclk = clocks.uart0;
      port.regshift = 0;
      port.iotype = UPIO_MEM;
      port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
      port.line = 0;

      if (early_serial_setup(&port) != 0) {
            printk("Early serial init of port 0 failed\n");
      }

#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
      /* Configure debug serial access */
      gen550_init(0, &port);

      /* Purge TLB entry added in head_44x.S for early serial access */
      _tlbie(UART0_IO_BASE, 0);
#endif

      port.membase = ioremap64(PPC440GP_UART1_ADDR, 8);
      port.irq = 1;
      port.uartclk = clocks.uart1;
      port.line = 1;

      if (early_serial_setup(&port) != 0) {
            printk("Early serial init of port 1 failed\n");
      }

#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
      /* Configure debug serial access */
      gen550_init(1, &port);
#endif
}

static void __init
ebony_setup_arch(void)
{
      struct ocp_def *def;
      struct ocp_func_emac_data *emacdata;

      /* Set mac_addr for each EMAC */
      def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 0);
      emacdata = def->additions;
      emacdata->phy_map = 0x00000001;     /* Skip 0x00 */
      emacdata->phy_mode = PHY_MODE_RMII;
      memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6);

      def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 1);
      emacdata = def->additions;
      emacdata->phy_map = 0x00000001;     /* Skip 0x00 */
      emacdata->phy_mode = PHY_MODE_RMII;
      memcpy(emacdata->mac_addr, __res.bi_enet1addr, 6);

      /*
       * Determine various clocks.
       * To be completely correct we should get SysClk
       * from FPGA, because it can be changed by on-board switches
       * --ebs
       */
      ibm440gp_get_clocks(&clocks, 33333333, 6 * 1843200);
      ocp_sys_info.opb_bus_freq = clocks.opb;

      /* Setup TODC access */
      TODC_INIT(TODC_TYPE_DS1743,
                  0,
                  0,
                  ioremap64(EBONY_RTC_ADDR, EBONY_RTC_SIZE),
                  8);

      /* init to some ~sane value until calibrate_delay() runs */
        loops_per_jiffy = 50000000/HZ;

      /* Setup PCI host bridge */
      ebony_setup_hose();

#ifdef CONFIG_BLK_DEV_INITRD
      if (initrd_start)
            ROOT_DEV = Root_RAM0;
      else
#endif
#ifdef CONFIG_ROOT_NFS
            ROOT_DEV = Root_NFS;
#else
            ROOT_DEV = Root_HDA1;
#endif

      ebony_early_serial_map();

      /* Identify the system */
      printk("IBM Ebony port (MontaVista Software, Inc. (source@mvista.com))\n");
}

void __init platform_init(unsigned long r3, unsigned long r4,
            unsigned long r5, unsigned long r6, unsigned long r7)
{
      ibm44x_platform_init(r3, r4, r5, r6, r7);

      ppc_md.setup_arch = ebony_setup_arch;
      ppc_md.show_cpuinfo = ebony_show_cpuinfo;
      ppc_md.get_irq = NULL;        /* Set in ppc4xx_pic_init() */

      ppc_md.calibrate_decr = ebony_calibrate_decr;
      ppc_md.time_init = todc_time_init;
      ppc_md.set_rtc_time = todc_set_rtc_time;
      ppc_md.get_rtc_time = todc_get_rtc_time;

      ppc_md.nvram_read_val = todc_direct_read_val;
      ppc_md.nvram_write_val = todc_direct_write_val;
#ifdef CONFIG_KGDB
      ppc_md.early_serial_map = ebony_early_serial_map;
#endif
}


Generated by  Doxygen 1.6.0   Back to index