Logo Search packages:      
Sourcecode: linux version File versions  Download package

daemon.h

/*
** -----------------------------------------------------------------------------
**
**  Perle Specialix driver for Linux
**  Ported from existing RIO Driver for SCO sources.
 *
 *  (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
 *
 *      This program is free software; you can redistribute it and/or modify
 *      it under the terms of the GNU General Public License as published by
 *      the Free Software Foundation; either version 2 of the License, or
 *      (at your option) any later version.
 *
 *      This program is distributed in the hope that it will be useful,
 *      but WITHOUT ANY WARRANTY; without even the implied warranty of
 *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *      GNU General Public License for more details.
 *
 *      You should have received a copy of the GNU General Public License
 *      along with this program; if not, write to the Free Software
 *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
**
**    Module            : daemon.h
**    SID         : 1.3
**    Last Modified     : 11/6/98 11:34:09
**    Retrieved   : 11/6/98 11:34:21
**
**  ident @(#)daemon.h  1.3
**
** -----------------------------------------------------------------------------
*/

#ifndef     __rio_daemon_h__
#define     __rio_daemon_h__

#ifdef SCCS_LABELS
#ifndef lint
static char *_daemon_h_sccs_ = "@(#)daemon.h    1.3";
#endif
#endif


/*
** structures used on /dev/rio
*/

struct Error {
      unsigned int Error;
      unsigned int Entry;
      unsigned int Other;
};

struct DownLoad {
      char __user *DataP;
      unsigned int Count;
      unsigned int ProductCode;
};

/*
** A few constants....
*/
#ifndef MAX_VERSION_LEN
#define     MAX_VERSION_LEN   256
#endif

#ifndef MAX_XP_CTRL_LEN
#define     MAX_XP_CTRL_LEN 16      /* ALSO IN PORT.H */
#endif

struct PortSetup {
      unsigned int From;            /* Set/Clear XP & IXANY Control from this port.... */
      unsigned int To;        /* .... to this port */
      unsigned int XpCps;           /* at this speed */
      char XpOn[MAX_XP_CTRL_LEN];   /* this is the start string */
      char XpOff[MAX_XP_CTRL_LEN];  /* this is the stop string */
      u8 IxAny;               /* enable/disable IXANY */
      u8 IxOn;                /* enable/disable IXON */
      u8 Lock;                /* lock port params */
      u8 Store;               /* store params across closes */
      u8 Drain;               /* close only when drained */
};

struct LpbReq {
      unsigned int Host;
      unsigned int Link;
      struct LPB __user *LpbP;
};

struct RupReq {
      unsigned int HostNum;
      unsigned int RupNum;
      struct RUP __user *RupP;
};

struct PortReq {
      unsigned int SysPort;
      struct Port __user *PortP;
};

struct StreamInfo {
      unsigned int SysPort;
      int RQueue;
      int WQueue;
};

struct HostReq {
      unsigned int HostNum;
      struct Host __user *HostP;
};

struct HostDpRam {
      unsigned int HostNum;
      struct DpRam __user *DpRamP;
};

struct DebugCtrl {
      unsigned int SysPort;
      unsigned int Debug;
      unsigned int Wait;
};

struct MapInfo {
      unsigned int FirstPort;       /* 8 ports, starting from this (tty) number */
      unsigned int RtaUnique;       /* reside on this RTA (unique number) */
};

struct MapIn {
      unsigned int NumEntries;      /* How many port sets are we mapping? */
      struct MapInfo *MapInfoP;     /* Pointer to (user space) info */
};

struct SendPack {
      unsigned int PortNum;
      unsigned char Len;
      unsigned char Data[PKT_MAX_DATA_LEN];
};

struct SpecialRupCmd {
      struct PKT Packet;
      unsigned short Host;
      unsigned short RupNum;
};

struct IdentifyRta {
      unsigned long RtaUnique;
      u8 ID;
};

struct KillNeighbour {
      unsigned long UniqueNum;
      u8 Link;
};

struct rioVersion {
      char version[MAX_VERSION_LEN];
      char relid[MAX_VERSION_LEN];
      int buildLevel;
      char buildDate[MAX_VERSION_LEN];
};


/*
**    RIOC commands are for the daemon type operations
**
** 09.12.1998 ARG - ESIL 0776 part fix
** Definition for 'RIOC' also appears in rioioctl.h, so we'd better do a
** #ifndef here first.
** rioioctl.h also now has #define 'RIO_QUICK_CHECK' as this ioctl is now
** allowed to be used by customers.
*/
#ifndef RIOC
#define     RIOC  ('R'<<8)|('i'<<16)|('o'<<24)
#endif

/*
** Boot stuff
*/
#define     RIO_GET_TABLE     (RIOC | 100)
#define RIO_PUT_TABLE     (RIOC | 101)
#define RIO_ASSIGN_RTA    (RIOC | 102)
#define RIO_DELETE_RTA    (RIOC | 103)
#define     RIO_HOST_FOAD       (RIOC | 104)
#define     RIO_QUICK_CHECK     (RIOC | 105)
#define RIO_SIGNALS_ON    (RIOC | 106)
#define RIO_SIGNALS_OFF   (RIOC | 107)
#define     RIO_CHANGE_NAME   (RIOC | 108)
#define RIO_DOWNLOAD      (RIOC | 109)
#define     RIO_GET_LOG   (RIOC | 110)
#define     RIO_SETUP_PORTS   (RIOC | 111)
#define RIO_ALL_MODEM     (RIOC | 112)

/*
** card state, debug stuff
*/
#define     RIO_NUM_HOSTS       (RIOC | 120)
#define     RIO_HOST_LPB        (RIOC | 121)
#define     RIO_HOST_RUP        (RIOC | 122)
#define     RIO_HOST_PORT       (RIOC | 123)
#define     RIO_PARMS     (RIOC | 124)
#define RIO_HOST_REQ      (RIOC | 125)
#define     RIO_READ_CONFIG     (RIOC | 126)
#define     RIO_SET_CONFIG      (RIOC | 127)
#define     RIO_VERSID    (RIOC | 128)
#define     RIO_FLAGS     (RIOC | 129)
#define     RIO_SETDEBUG        (RIOC | 130)
#define     RIO_GETDEBUG        (RIOC | 131)
#define     RIO_READ_LEVELS   (RIOC | 132)
#define     RIO_SET_FAST_BUS  (RIOC | 133)
#define     RIO_SET_SLOW_BUS  (RIOC | 134)
#define     RIO_SET_BYTE_MODE (RIOC | 135)
#define     RIO_SET_WORD_MODE (RIOC | 136)
#define RIO_STREAM_INFO   (RIOC | 137)
#define     RIO_START_POLLER  (RIOC | 138)
#define     RIO_STOP_POLLER   (RIOC | 139)
#define     RIO_LAST_ERROR    (RIOC | 140)
#define     RIO_TICK      (RIOC | 141)
#define     RIO_TOCK      (RIOC | 241)    /* I did this on purpose, you know. */
#define     RIO_SEND_PACKET   (RIOC | 142)
#define     RIO_SET_BUSY        (RIOC | 143)
#define     SPECIAL_RUP_CMD   (RIOC | 144)
#define     RIO_FOAD_RTA      (RIOC | 145)
#define     RIO_ZOMBIE_RTA    (RIOC | 146)
#define RIO_IDENTIFY_RTA  (RIOC | 147)
#define RIO_KILL_NEIGHBOUR (RIOC | 148)
#define RIO_DEBUG_MEM     (RIOC | 149)
/*
** 150 - 167 used.....   See below
*/
#define RIO_GET_PORT_SETUP (RIOC | 168)
#define RIO_RESUME        (RIOC | 169)
#define     RIO_MESG    (RIOC | 170)
#define     RIO_NO_MESG (RIOC | 171)
#define     RIO_WHAT_MESG     (RIOC | 172)
#define RIO_HOST_DPRAM  (RIOC | 173)
#define RIO_MAP_B50_TO_50     (RIOC | 174)
#define RIO_MAP_B50_TO_57600  (RIOC | 175)
#define RIO_MAP_B110_TO_110   (RIOC | 176)
#define RIO_MAP_B110_TO_115200      (RIOC | 177)
#define RIO_GET_PORT_PARAMS   (RIOC | 178)
#define RIO_SET_PORT_PARAMS   (RIOC | 179)
#define RIO_GET_PORT_TTY      (RIOC | 180)
#define RIO_SET_PORT_TTY      (RIOC | 181)
#define RIO_SYSLOG_ONLY (RIOC | 182)
#define RIO_SYSLOG_CONS (RIOC | 183)
#define RIO_CONS_ONLY   (RIOC | 184)
#define RIO_BLOCK_OPENS (RIOC | 185)

/*
** 02.03.1999 ARG - ESIL 0820 fix :
** RIOBootMode is no longer use by the driver, so these ioctls
** are now obsolete :
**
#define RIO_GET_BOOT_MODE     (RIOC | 186)
#define RIO_SET_BOOT_MODE     (RIOC | 187)
**
*/

#define RIO_MEM_DUMP    (RIOC | 189)
#define RIO_READ_REGISTER     (RIOC | 190)
#define RIO_GET_MODTYPE (RIOC | 191)
#define RIO_SET_TIMER   (RIOC | 192)
#define RIO_READ_CHECK  (RIOC | 196)
#define RIO_WAITING_FOR_RESTART     (RIOC | 197)
#define RIO_BIND_RTA    (RIOC | 198)
#define RIO_GET_BINDINGS      (RIOC | 199)
#define RIO_PUT_BINDINGS      (RIOC | 200)

#define     RIO_MAKE_DEV            (RIOC | 201)
#define     RIO_MINOR         (RIOC | 202)

#define     RIO_IDENTIFY_DRIVER     (RIOC | 203)
#define     RIO_DISPLAY_HOST_CFG    (RIOC | 204)


/*
** MAKE_DEV / MINOR stuff
*/
#define     RIO_DEV_DIRECT          0x0000
#define     RIO_DEV_MODEM           0x0200
#define     RIO_DEV_XPRINT          0x0400
#define     RIO_DEV_MASK            0x0600

/*
** port management, xprint stuff
*/
#define     rIOCN(N)    (RIOC|(N))
#define     rIOCR(N,T)  (RIOC|(N))
#define     rIOCW(N,T)  (RIOC|(N))

#define     RIO_GET_XP_ON     rIOCR(150,char[16])     /* start xprint string */
#define     RIO_SET_XP_ON     rIOCW(151,char[16])
#define     RIO_GET_XP_OFF    rIOCR(152,char[16])     /* finish xprint string */
#define     RIO_SET_XP_OFF    rIOCW(153,char[16])
#define     RIO_GET_XP_CPS    rIOCR(154,int)    /* xprint CPS */
#define     RIO_SET_XP_CPS    rIOCW(155,int)
#define RIO_GET_IXANY     rIOCR(156,int)  /* ixany allowed? */
#define RIO_SET_IXANY     rIOCW(157,int)
#define RIO_SET_IXANY_ON  rIOCN(158)      /* allow ixany */
#define RIO_SET_IXANY_OFF rIOCN(159)      /* disallow ixany */
#define RIO_GET_MODEM     rIOCR(160,int)  /* port is modem/direct line? */
#define RIO_SET_MODEM     rIOCW(161,int)
#define RIO_SET_MODEM_ON  rIOCN(162)      /* port is a modem */
#define RIO_SET_MODEM_OFF rIOCN(163)      /* port is direct */
#define RIO_GET_IXON      rIOCR(164,int)  /* ixon allowed? */
#define RIO_SET_IXON      rIOCW(165,int)
#define RIO_SET_IXON_ON   rIOCN(166)      /* allow ixon */
#define RIO_SET_IXON_OFF  rIOCN(167)      /* disallow ixon */

#define RIO_GET_SIVIEW    ((('s')<<8) | 106)    /* backwards compatible with SI */

#define     RIO_IOCTL_UNKNOWN -2

#endif

Generated by  Doxygen 1.6.0   Back to index