Logo Search packages:      
Sourcecode: linux version File versions  Download package

setup.c

/*
 *  linux/arch/h8300/kernel/setup.c
 *
 *  Copyleft  ()) 2000       James D. Schettine {james@telos-systems.com}
 *  Copyright (C) 1999,2000  Greg Ungerer (gerg@snapgear.com)
 *  Copyright (C) 1998,1999  D. Jeff Dionne <jeff@lineo.ca>
 *  Copyright (C) 1998       Kenneth Albanowski <kjahds@kjahds.com>
 *  Copyright (C) 1995       Hamish Macdonald
 *  Copyright (C) 2000       Lineo Inc. (www.lineo.com) 
 *  Copyright (C) 2001       Lineo, Inc. <www.lineo.com>
 *
 *  H8/300 porting Yoshinori Sato <ysato@users.sourceforge.jp>
 */

/*
 * This file handles the architecture-dependent parts of system setup
 */

#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/fs.h>
#include <linux/fb.h>
#include <linux/console.h>
#include <linux/genhd.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/major.h>
#include <linux/bootmem.h>
#include <linux/seq_file.h>
#include <linux/init.h>

#include <asm/setup.h>
#include <asm/irq.h>
#include <asm/pgtable.h>

#if defined(__H8300H__)
#define CPU "H8/300H"
#include <asm/regs306x.h>
#endif

#if defined(__H8300S__)
#define CPU "H8S"
#include <asm/regs267x.h>
#endif

#define STUBSIZE 0xc000;

unsigned long rom_length;
unsigned long memory_start;
unsigned long memory_end;

char __initdata command_line[COMMAND_LINE_SIZE];

extern int _stext, _etext, _sdata, _edata, _sbss, _ebss, _end;
extern int _ramstart, _ramend;
extern char _target_name[];
extern void h8300_gpio_init(void);

#if (defined(CONFIG_H8300H_SIM) || defined(CONFIG_H8S_SIM)) \
    && defined(CONFIG_GDB_MAGICPRINT)
/* printk with gdb service */
static void gdb_console_output(struct console *c, const char *msg, unsigned len)
{
      for (; len > 0; len--) {
            asm("mov.w %0,r2\n\t"
                    "jsr @0xc4"::"r"(*msg++):"er2");
      }
}

/*
 *    Setup initial baud/bits/parity. We do two things here:
 *    - construct a cflag setting for the first rs_open()
 *    - initialize the serial port
 *    Return non-zero if we didn't find a serial port.
 */
static int __init gdb_console_setup(struct console *co, char *options)
{
      return 0;
}

static const struct console gdb_console = {
      .name       = "gdb_con",
      .write            = gdb_console_output,
      .device           = NULL,
      .setup            = gdb_console_setup,
      .flags            = CON_PRINTBUFFER,
      .index            = -1,
};
#endif

void __init setup_arch(char **cmdline_p)
{
      int bootmap_size;

      memory_start = (unsigned long) &_ramstart;

      /* allow for ROMFS on the end of the kernel */
      if (memcmp((void *)memory_start, "-rom1fs-", 8) == 0) {
#if defined(CONFIG_BLK_DEV_INITRD)
            initrd_start = memory_start;
            initrd_end = memory_start += be32_to_cpu(((unsigned long *) (memory_start))[2]);
#else
            memory_start += be32_to_cpu(((unsigned long *) memory_start)[2]);
#endif
      }
      memory_start = PAGE_ALIGN(memory_start);
#if !defined(CONFIG_BLKDEV_RESERVE)
      memory_end = (unsigned long) &_ramend; /* by now the stack is part of the init task */
#if defined(CONFIG_GDB_DEBUG)
      memory_end -= STUBSIZE;
#endif
#else
      if ((memory_end < CONFIG_BLKDEV_RESERVE_ADDRESS) && 
          (memory_end > CONFIG_BLKDEV_RESERVE_ADDRESS))
          /* overlap userarea */
          memory_end = CONFIG_BLKDEV_RESERVE_ADDRESS; 
#endif

      init_mm.start_code = (unsigned long) &_stext;
      init_mm.end_code = (unsigned long) &_etext;
      init_mm.end_data = (unsigned long) &_edata;
      init_mm.brk = (unsigned long) 0; 

#if (defined(CONFIG_H8300H_SIM) || defined(CONFIG_H8S_SIM)) && defined(CONFIG_GDB_MAGICPRINT)
      register_console((struct console *)&gdb_console);
#endif

      printk(KERN_INFO "\r\n\nuClinux " CPU "\n");
      printk(KERN_INFO "Target Hardware: %s\n",_target_name);
      printk(KERN_INFO "Flat model support (C) 1998,1999 Kenneth Albanowski, D. Jeff Dionne\n");
      printk(KERN_INFO "H8/300 series support by Yoshinori Sato <ysato@users.sourceforge.jp>\n");

#ifdef DEBUG
      printk(KERN_DEBUG "KERNEL -> TEXT=0x%06x-0x%06x DATA=0x%06x-0x%06x "
            "BSS=0x%06x-0x%06x\n", (int) &_stext, (int) &_etext,
            (int) &_sdata, (int) &_edata,
            (int) &_sbss, (int) &_ebss);
      printk(KERN_DEBUG "KERNEL -> ROMFS=0x%06x-0x%06x MEM=0x%06x-0x%06x "
            "STACK=0x%06x-0x%06x\n",
             (int) &_ebss, (int) memory_start,
            (int) memory_start, (int) memory_end,
            (int) memory_end, (int) &_ramend);
#endif

#ifdef CONFIG_DEFAULT_CMDLINE
      /* set from default command line */
      if (*command_line == '\0')
            strcpy(command_line,CONFIG_KERNEL_COMMAND);
#endif
      /* Keep a copy of command line */
      *cmdline_p = &command_line[0];
      memcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
      boot_command_line[COMMAND_LINE_SIZE-1] = 0;

#ifdef DEBUG
      if (strlen(*cmdline_p)) 
            printk(KERN_DEBUG "Command line: '%s'\n", *cmdline_p);
#endif

      /*
       * give all the memory to the bootmap allocator,  tell it to put the
       * boot mem_map at the start of memory
       */
      bootmap_size = init_bootmem_node(
                  NODE_DATA(0),
                  memory_start >> PAGE_SHIFT, /* map goes here */
                  PAGE_OFFSET >> PAGE_SHIFT,    /* 0 on coldfire */
                  memory_end >> PAGE_SHIFT);
      /*
       * free the usable memory,  we have to make sure we do not free
       * the bootmem bitmap so we then reserve it after freeing it :-)
       */
      free_bootmem(memory_start, memory_end - memory_start);
      reserve_bootmem(memory_start, bootmap_size);
      /*
       * get kmalloc into gear
       */
      paging_init();
      h8300_gpio_init();
#if defined(CONFIG_H8300_AKI3068NET) && defined(CONFIG_IDE)
      {
#define AREABIT(addr) (1 << (((addr) >> 21) & 7))
            /* setup BSC */
            volatile unsigned char *abwcr = (volatile unsigned char *)ABWCR;
            volatile unsigned char *cscr = (volatile unsigned char *)CSCR;
            *abwcr &= ~(AREABIT(CONFIG_H8300_IDE_BASE) | AREABIT(CONFIG_H8300_IDE_ALT));
            *cscr  |= (AREABIT(CONFIG_H8300_IDE_BASE) | AREABIT(CONFIG_H8300_IDE_ALT)) | 0x0f;
      }
#endif
#ifdef DEBUG
      printk(KERN_DEBUG "Done setup_arch\n");
#endif
}

/*
 *    Get CPU information for use by the procfs.
 */

static int show_cpuinfo(struct seq_file *m, void *v)
{
    char *cpu;
    int mode;
    u_long clockfreq;

    cpu = CPU;
    mode = *(volatile unsigned char *)MDCR & 0x07;

    clockfreq = CONFIG_CPU_CLOCK;

    seq_printf(m,  "CPU:\t\t%s (mode:%d)\n"
               "Clock:\t\t%lu.%1luMHz\n"
               "BogoMips:\t%lu.%02lu\n"
               "Calibration:\t%lu loops\n",
                 cpu,mode,
               clockfreq/1000,clockfreq%1000,
               (loops_per_jiffy*HZ)/500000,((loops_per_jiffy*HZ)/5000)%100,
               (loops_per_jiffy*HZ));

    return 0;
}

static void *c_start(struct seq_file *m, loff_t *pos)
{
      return *pos < NR_CPUS ? ((void *) 0x12345678) : NULL;
}

static void *c_next(struct seq_file *m, void *v, loff_t *pos)
{
      ++*pos;
      return c_start(m, pos);
}

static void c_stop(struct seq_file *m, void *v)
{
}

struct seq_operations cpuinfo_op = {
      .start      = c_start,
      .next = c_next,
      .stop = c_stop,
      .show = show_cpuinfo,
};

Generated by  Doxygen 1.6.0   Back to index