Logo Search packages:      
Sourcecode: linux version File versions  Download package

i2c-i801.c

/*
    i2c-i801.c - Part of lm_sensors, Linux kernel modules for hardware
              monitoring
    Copyright (c) 1998 - 2002  Frodo Looijaard <frodol@dds.nl>,
    Philip Edelbrock <phil@netroedge.com>, and Mark D. Studebaker
    <mdsxyz123@yahoo.com>

    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/

/*
    SUPPORTED DEVICES   PCI ID
    82801AA       2413
    82801AB       2423
    82801BA       2443
    82801CA/CAM         2483
    82801DB       24C3   (HW PEC supported)
    82801EB       24D3   (HW PEC supported)
    6300ESB       25A4
    ICH6          266A
    ICH7          27DA
    ESB2          269B
    ICH8          283E
    ICH9          2930
    Tolapai       5032
    This driver supports several versions of Intel's I/O Controller Hubs (ICH).
    For SMBus support, they are similar to the PIIX4 and are part
    of Intel's '810' and other chipsets.
    See the file Documentation/i2c/busses/i2c-i801 for details.
    I2C Block Read and Process Call are not supported.
*/

/* Note: we assume there can only be one I801, with one SMBus interface */

#include <linux/module.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/stddef.h>
#include <linux/delay.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/i2c.h>
#include <asm/io.h>

/* I801 SMBus address offsets */
#define SMBHSTSTS (0 + i801_smba)
#define SMBHSTCNT (2 + i801_smba)
#define SMBHSTCMD (3 + i801_smba)
#define SMBHSTADD (4 + i801_smba)
#define SMBHSTDAT0      (5 + i801_smba)
#define SMBHSTDAT1      (6 + i801_smba)
#define SMBBLKDAT (7 + i801_smba)
#define SMBPEC          (8 + i801_smba)   /* ICH4 only */
#define SMBAUXSTS (12 + i801_smba)  /* ICH4 only */
#define SMBAUXCTL (13 + i801_smba)  /* ICH4 only */

/* PCI Address Constants */
#define SMBBAR          4
#define SMBHSTCFG 0x040

/* Host configuration bits for SMBHSTCFG */
#define SMBHSTCFG_HST_EN      1
#define SMBHSTCFG_SMB_SMI_EN  2
#define SMBHSTCFG_I2C_EN      4

/* Auxillary control register bits, ICH4+ only */
#define SMBAUXCTL_CRC         1
#define SMBAUXCTL_E32B        2

/* kill bit for SMBHSTCNT */
#define SMBHSTCNT_KILL        2

/* Other settings */
#define MAX_TIMEOUT           100
#define ENABLE_INT9           0     /* set to 0x01 to enable - untested */

/* I801 command constants */
#define I801_QUICK            0x00
#define I801_BYTE       0x04
#define I801_BYTE_DATA        0x08
#define I801_WORD_DATA        0x0C
#define I801_PROC_CALL        0x10  /* later chips only, unimplemented */
#define I801_BLOCK_DATA       0x14
#define I801_I2C_BLOCK_DATA   0x18  /* unimplemented */
#define I801_BLOCK_LAST       0x34
#define I801_I2C_BLOCK_LAST   0x38  /* unimplemented */
#define I801_START            0x40
#define I801_PEC_EN           0x80  /* ICH4 only */

/* I801 Hosts Status register bits */
#define SMBHSTSTS_BYTE_DONE   0x80
#define SMBHSTSTS_INUSE_STS   0x40
#define SMBHSTSTS_SMBALERT_STS      0x20
#define SMBHSTSTS_FAILED      0x10
#define SMBHSTSTS_BUS_ERR     0x08
#define SMBHSTSTS_DEV_ERR     0x04
#define SMBHSTSTS_INTR        0x02
#define SMBHSTSTS_HOST_BUSY   0x01

static unsigned long i801_smba;
static unsigned char i801_original_hstcfg;
static struct pci_driver i801_driver;
static struct pci_dev *I801_dev;
static int isich4;

static int i801_transaction(int xact)
{
      int temp;
      int result = 0;
      int timeout = 0;

      dev_dbg(&I801_dev->dev, "Transaction (pre): CNT=%02x, CMD=%02x, "
            "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
            inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
            inb_p(SMBHSTDAT1));

      /* Make sure the SMBus host is ready to start transmitting */
      /* 0x1f = Failed, Bus_Err, Dev_Err, Intr, Host_Busy */
      if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) {
            dev_dbg(&I801_dev->dev, "SMBus busy (%02x). Resetting...\n",
                  temp);
            outb_p(temp, SMBHSTSTS);
            if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) {
                  dev_dbg(&I801_dev->dev, "Failed! (%02x)\n", temp);
                  return -1;
            } else {
                  dev_dbg(&I801_dev->dev, "Successful!\n");
            }
      }

      /* the current contents of SMBHSTCNT can be overwritten, since PEC,
       * INTREN, SMBSCMD are passed in xact */
      outb_p(xact | I801_START, SMBHSTCNT);

      /* We will always wait for a fraction of a second! */
      do {
            msleep(1);
            temp = inb_p(SMBHSTSTS);
      } while ((temp & SMBHSTSTS_HOST_BUSY) && (timeout++ < MAX_TIMEOUT));

      /* If the SMBus is still busy, we give up */
      if (timeout >= MAX_TIMEOUT) {
            dev_dbg(&I801_dev->dev, "SMBus Timeout!\n");
            result = -1;
            /* try to stop the current command */
            dev_dbg(&I801_dev->dev, "Terminating the current operation\n");
            outb_p(inb_p(SMBHSTCNT) | SMBHSTCNT_KILL, SMBHSTCNT);
            msleep(1);
            outb_p(inb_p(SMBHSTCNT) & (~SMBHSTCNT_KILL), SMBHSTCNT);
      }

      if (temp & SMBHSTSTS_FAILED) {
            result = -1;
            dev_dbg(&I801_dev->dev, "Error: Failed bus transaction\n");
      }

      if (temp & SMBHSTSTS_BUS_ERR) {
            result = -1;
            dev_err(&I801_dev->dev, "Bus collision! SMBus may be locked "
                  "until next hard reset. (sorry!)\n");
            /* Clock stops and slave is stuck in mid-transmission */
      }

      if (temp & SMBHSTSTS_DEV_ERR) {
            result = -1;
            dev_dbg(&I801_dev->dev, "Error: no response!\n");
      }

      if ((inb_p(SMBHSTSTS) & 0x1f) != 0x00)
            outb_p(inb(SMBHSTSTS), SMBHSTSTS);

      if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) {
            dev_dbg(&I801_dev->dev, "Failed reset at end of transaction "
                  "(%02x)\n", temp);
      }
      dev_dbg(&I801_dev->dev, "Transaction (post): CNT=%02x, CMD=%02x, "
            "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
            inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
            inb_p(SMBHSTDAT1));
      return result;
}

/* wait for INTR bit as advised by Intel */
static void i801_wait_hwpec(void)
{
      int timeout = 0;
      int temp;

      do {
            msleep(1);
            temp = inb_p(SMBHSTSTS);
      } while ((!(temp & SMBHSTSTS_INTR))
             && (timeout++ < MAX_TIMEOUT));

      if (timeout >= MAX_TIMEOUT) {
            dev_dbg(&I801_dev->dev, "PEC Timeout!\n");
      }
      outb_p(temp, SMBHSTSTS);
}

static int i801_block_transaction_by_block(union i2c_smbus_data *data,
                                 char read_write, int hwpec)
{
      int i, len;

      inb_p(SMBHSTCNT); /* reset the data buffer index */

      /* Use 32-byte buffer to process this transaction */
      if (read_write == I2C_SMBUS_WRITE) {
            len = data->block[0];
            outb_p(len, SMBHSTDAT0);
            for (i = 0; i < len; i++)
                  outb_p(data->block[i+1], SMBBLKDAT);
      }

      if (i801_transaction(I801_BLOCK_DATA | ENABLE_INT9 |
                       I801_PEC_EN * hwpec))
            return -1;

      if (read_write == I2C_SMBUS_READ) {
            len = inb_p(SMBHSTDAT0);
            if (len < 1 || len > I2C_SMBUS_BLOCK_MAX)
                  return -1;

            data->block[0] = len;
            for (i = 0; i < len; i++)
                  data->block[i + 1] = inb_p(SMBBLKDAT);
      }
      return 0;
}

static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data,
                                     char read_write, int hwpec)
{
      int i, len;
      int smbcmd;
      int temp;
      int result = 0;
      int timeout;
      unsigned char errmask;

      len = data->block[0];

      if (read_write == I2C_SMBUS_WRITE) {
            outb_p(len, SMBHSTDAT0);
            outb_p(data->block[1], SMBBLKDAT);
      }

      for (i = 1; i <= len; i++) {
            if (i == len && read_write == I2C_SMBUS_READ)
                  smbcmd = I801_BLOCK_LAST;
            else
                  smbcmd = I801_BLOCK_DATA;
            outb_p(smbcmd | ENABLE_INT9, SMBHSTCNT);

            dev_dbg(&I801_dev->dev, "Block (pre %d): CNT=%02x, CMD=%02x, "
                  "ADD=%02x, DAT0=%02x, BLKDAT=%02x\n", i,
                  inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD),
                  inb_p(SMBHSTDAT0), inb_p(SMBBLKDAT));

            /* Make sure the SMBus host is ready to start transmitting */
            temp = inb_p(SMBHSTSTS);
            if (i == 1) {
                  /* Erroneous conditions before transaction:
                   * Byte_Done, Failed, Bus_Err, Dev_Err, Intr, Host_Busy */
                  errmask = 0x9f;
            } else {
                  /* Erroneous conditions during transaction:
                   * Failed, Bus_Err, Dev_Err, Intr */
                  errmask = 0x1e;
            }
            if (temp & errmask) {
                  dev_dbg(&I801_dev->dev, "SMBus busy (%02x). "
                        "Resetting...\n", temp);
                  outb_p(temp, SMBHSTSTS);
                  if (((temp = inb_p(SMBHSTSTS)) & errmask) != 0x00) {
                        dev_err(&I801_dev->dev,
                              "Reset failed! (%02x)\n", temp);
                        return -1;
                  }
                  if (i != 1)
                        /* if die in middle of block transaction, fail */
                        return -1;
            }

            if (i == 1)
                  outb_p(inb(SMBHSTCNT) | I801_START, SMBHSTCNT);

            /* We will always wait for a fraction of a second! */
            timeout = 0;
            do {
                  msleep(1);
                  temp = inb_p(SMBHSTSTS);
            }
            while ((!(temp & SMBHSTSTS_BYTE_DONE))
                   && (timeout++ < MAX_TIMEOUT));

            /* If the SMBus is still busy, we give up */
            if (timeout >= MAX_TIMEOUT) {
                  /* try to stop the current command */
                  dev_dbg(&I801_dev->dev, "Terminating the current "
                                    "operation\n");
                  outb_p(inb_p(SMBHSTCNT) | SMBHSTCNT_KILL, SMBHSTCNT);
                  msleep(1);
                  outb_p(inb_p(SMBHSTCNT) & (~SMBHSTCNT_KILL),
                        SMBHSTCNT);
                  result = -1;
                  dev_dbg(&I801_dev->dev, "SMBus Timeout!\n");
            }

            if (temp & SMBHSTSTS_FAILED) {
                  result = -1;
                  dev_dbg(&I801_dev->dev,
                        "Error: Failed bus transaction\n");
            } else if (temp & SMBHSTSTS_BUS_ERR) {
                  result = -1;
                  dev_err(&I801_dev->dev, "Bus collision!\n");
            } else if (temp & SMBHSTSTS_DEV_ERR) {
                  result = -1;
                  dev_dbg(&I801_dev->dev, "Error: no response!\n");
            }

            if (i == 1 && read_write == I2C_SMBUS_READ) {
                  len = inb_p(SMBHSTDAT0);
                  if (len < 1 || len > I2C_SMBUS_BLOCK_MAX)
                        return -1;
                  data->block[0] = len;
            }

            /* Retrieve/store value in SMBBLKDAT */
            if (read_write == I2C_SMBUS_READ)
                  data->block[i] = inb_p(SMBBLKDAT);
            if (read_write == I2C_SMBUS_WRITE && i+1 <= len)
                  outb_p(data->block[i+1], SMBBLKDAT);
            if ((temp & 0x9e) != 0x00)
                  outb_p(temp, SMBHSTSTS);  /* signals SMBBLKDAT ready */

            if ((temp = (0x1e & inb_p(SMBHSTSTS))) != 0x00) {
                  dev_dbg(&I801_dev->dev,
                        "Bad status (%02x) at end of transaction\n",
                        temp);
            }
            dev_dbg(&I801_dev->dev, "Block (post %d): CNT=%02x, CMD=%02x, "
                  "ADD=%02x, DAT0=%02x, BLKDAT=%02x\n", i,
                  inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD),
                  inb_p(SMBHSTDAT0), inb_p(SMBBLKDAT));

            if (result < 0)
                  return result;
      }
      return result;
}

static int i801_set_block_buffer_mode(void)
{
      outb_p(inb_p(SMBAUXCTL) | SMBAUXCTL_E32B, SMBAUXCTL);
      if ((inb_p(SMBAUXCTL) & SMBAUXCTL_E32B) == 0)
            return -1;
      return 0;
}

/* Block transaction function */
static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
                          int command, int hwpec)
{
      int result = 0;
      unsigned char hostc;

      if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
            if (read_write == I2C_SMBUS_WRITE) {
                  /* set I2C_EN bit in configuration register */
                  pci_read_config_byte(I801_dev, SMBHSTCFG, &hostc);
                  pci_write_config_byte(I801_dev, SMBHSTCFG,
                                    hostc | SMBHSTCFG_I2C_EN);
            } else {
                  dev_err(&I801_dev->dev,
                        "I2C_SMBUS_I2C_BLOCK_READ not DB!\n");
                  return -1;
            }
      }

      if (read_write == I2C_SMBUS_WRITE) {
            if (data->block[0] < 1)
                  data->block[0] = 1;
            if (data->block[0] > I2C_SMBUS_BLOCK_MAX)
                  data->block[0] = I2C_SMBUS_BLOCK_MAX;
      } else {
            data->block[0] = 32;    /* max for reads */
      }

      if (isich4 && i801_set_block_buffer_mode() == 0 )
            result = i801_block_transaction_by_block(data, read_write,
                                           hwpec);
      else
            result = i801_block_transaction_byte_by_byte(data, read_write,
                                               hwpec);

      if (result == 0 && hwpec)
            i801_wait_hwpec();

      if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
            /* restore saved configuration register value */
            pci_write_config_byte(I801_dev, SMBHSTCFG, hostc);
      }
      return result;
}

/* Return -1 on error. */
static s32 i801_access(struct i2c_adapter * adap, u16 addr,
                   unsigned short flags, char read_write, u8 command,
                   int size, union i2c_smbus_data * data)
{
      int hwpec;
      int block = 0;
      int ret, xact = 0;

      hwpec = isich4 && (flags & I2C_CLIENT_PEC)
            && size != I2C_SMBUS_QUICK
            && size != I2C_SMBUS_I2C_BLOCK_DATA;

      switch (size) {
      case I2C_SMBUS_QUICK:
            outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
                   SMBHSTADD);
            xact = I801_QUICK;
            break;
      case I2C_SMBUS_BYTE:
            outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
                   SMBHSTADD);
            if (read_write == I2C_SMBUS_WRITE)
                  outb_p(command, SMBHSTCMD);
            xact = I801_BYTE;
            break;
      case I2C_SMBUS_BYTE_DATA:
            outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
                   SMBHSTADD);
            outb_p(command, SMBHSTCMD);
            if (read_write == I2C_SMBUS_WRITE)
                  outb_p(data->byte, SMBHSTDAT0);
            xact = I801_BYTE_DATA;
            break;
      case I2C_SMBUS_WORD_DATA:
            outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
                   SMBHSTADD);
            outb_p(command, SMBHSTCMD);
            if (read_write == I2C_SMBUS_WRITE) {
                  outb_p(data->word & 0xff, SMBHSTDAT0);
                  outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1);
            }
            xact = I801_WORD_DATA;
            break;
      case I2C_SMBUS_BLOCK_DATA:
      case I2C_SMBUS_I2C_BLOCK_DATA:
            outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
                   SMBHSTADD);
            outb_p(command, SMBHSTCMD);
            block = 1;
            break;
      case I2C_SMBUS_PROC_CALL:
      default:
            dev_err(&I801_dev->dev, "Unsupported transaction %d\n", size);
            return -1;
      }

      if (hwpec)  /* enable/disable hardware PEC */
            outb_p(inb_p(SMBAUXCTL) | SMBAUXCTL_CRC, SMBAUXCTL);
      else
            outb_p(inb_p(SMBAUXCTL) & (~SMBAUXCTL_CRC), SMBAUXCTL);

      if(block)
            ret = i801_block_transaction(data, read_write, size, hwpec);
      else
            ret = i801_transaction(xact | ENABLE_INT9);

      /* Some BIOSes don't like it when PEC is enabled at reboot or resume
         time, so we forcibly disable it after every transaction. Turn off
         E32B for the same reason. */
      if (hwpec)
            outb_p(inb_p(SMBAUXCTL) & ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B),
                   SMBAUXCTL);

      if(block)
            return ret;
      if(ret)
            return -1;
      if ((read_write == I2C_SMBUS_WRITE) || (xact == I801_QUICK))
            return 0;

      switch (xact & 0x7f) {
      case I801_BYTE:   /* Result put in SMBHSTDAT0 */
      case I801_BYTE_DATA:
            data->byte = inb_p(SMBHSTDAT0);
            break;
      case I801_WORD_DATA:
            data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8);
            break;
      }
      return 0;
}


static u32 i801_func(struct i2c_adapter *adapter)
{
      return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
          I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
          I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK
           | (isich4 ? I2C_FUNC_SMBUS_PEC : 0);
}

static const struct i2c_algorithm smbus_algorithm = {
      .smbus_xfer = i801_access,
      .functionality    = i801_func,
};

static struct i2c_adapter i801_adapter = {
      .owner            = THIS_MODULE,
      .id         = I2C_HW_SMBUS_I801,
      .class            = I2C_CLASS_HWMON,
      .algo       = &smbus_algorithm,
};

static struct pci_device_id i801_ids[] = {
      { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_3) },
      { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_3) },
      { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_2) },
      { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_3) },
      { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_3) },
      { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_3) },
      { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_4) },
      { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_16) },
      { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_17) },
      { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_17) },
      { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_5) },
      { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_6) },
      { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TOLAPAI_1) },
      { 0, }
};

MODULE_DEVICE_TABLE (pci, i801_ids);

static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
      unsigned char temp;
      int err;

      I801_dev = dev;
      switch (dev->device) {
      case PCI_DEVICE_ID_INTEL_82801DB_3:
      case PCI_DEVICE_ID_INTEL_82801EB_3:
      case PCI_DEVICE_ID_INTEL_ESB_4:
      case PCI_DEVICE_ID_INTEL_ICH6_16:
      case PCI_DEVICE_ID_INTEL_ICH7_17:
      case PCI_DEVICE_ID_INTEL_ESB2_17:
      case PCI_DEVICE_ID_INTEL_ICH8_5:
      case PCI_DEVICE_ID_INTEL_ICH9_6:
      case PCI_DEVICE_ID_INTEL_TOLAPAI_1:
            isich4 = 1;
            break;
      default:
            isich4 = 0;
      }

      err = pci_enable_device(dev);
      if (err) {
            dev_err(&dev->dev, "Failed to enable SMBus PCI device (%d)\n",
                  err);
            goto exit;
      }

      /* Determine the address of the SMBus area */
      i801_smba = pci_resource_start(dev, SMBBAR);
      if (!i801_smba) {
            dev_err(&dev->dev, "SMBus base address uninitialized, "
                  "upgrade BIOS\n");
            err = -ENODEV;
            goto exit;
      }

      err = pci_request_region(dev, SMBBAR, i801_driver.name);
      if (err) {
            dev_err(&dev->dev, "Failed to request SMBus region "
                  "0x%lx-0x%Lx\n", i801_smba,
                  (unsigned long long)pci_resource_end(dev, SMBBAR));
            goto exit;
      }

      pci_read_config_byte(I801_dev, SMBHSTCFG, &temp);
      i801_original_hstcfg = temp;
      temp &= ~SMBHSTCFG_I2C_EN;    /* SMBus timing */
      if (!(temp & SMBHSTCFG_HST_EN)) {
            dev_info(&dev->dev, "Enabling SMBus device\n");
            temp |= SMBHSTCFG_HST_EN;
      }
      pci_write_config_byte(I801_dev, SMBHSTCFG, temp);

      if (temp & SMBHSTCFG_SMB_SMI_EN)
            dev_dbg(&dev->dev, "SMBus using interrupt SMI#\n");
      else
            dev_dbg(&dev->dev, "SMBus using PCI Interrupt\n");

      /* set up the sysfs linkage to our parent device */
      i801_adapter.dev.parent = &dev->dev;

      snprintf(i801_adapter.name, sizeof(i801_adapter.name),
            "SMBus I801 adapter at %04lx", i801_smba);
      err = i2c_add_adapter(&i801_adapter);
      if (err) {
            dev_err(&dev->dev, "Failed to add SMBus adapter\n");
            goto exit_release;
      }
      return 0;

exit_release:
      pci_release_region(dev, SMBBAR);
exit:
      return err;
}

static void __devexit i801_remove(struct pci_dev *dev)
{
      i2c_del_adapter(&i801_adapter);
      pci_write_config_byte(I801_dev, SMBHSTCFG, i801_original_hstcfg);
      pci_release_region(dev, SMBBAR);
      /*
       * do not call pci_disable_device(dev) since it can cause hard hangs on
       * some systems during power-off (eg. Fujitsu-Siemens Lifebook E8010)
       */
}

#ifdef CONFIG_PM
static int i801_suspend(struct pci_dev *dev, pm_message_t mesg)
{
      pci_save_state(dev);
      pci_write_config_byte(dev, SMBHSTCFG, i801_original_hstcfg);
      pci_set_power_state(dev, pci_choose_state(dev, mesg));
      return 0;
}

static int i801_resume(struct pci_dev *dev)
{
      pci_set_power_state(dev, PCI_D0);
      pci_restore_state(dev);
      return pci_enable_device(dev);
}
#else
#define i801_suspend NULL
#define i801_resume NULL
#endif

static struct pci_driver i801_driver = {
      .name       = "i801_smbus",
      .id_table   = i801_ids,
      .probe            = i801_probe,
      .remove           = __devexit_p(i801_remove),
      .suspend    = i801_suspend,
      .resume           = i801_resume,
};

static int __init i2c_i801_init(void)
{
      return pci_register_driver(&i801_driver);
}

static void __exit i2c_i801_exit(void)
{
      pci_unregister_driver(&i801_driver);
}

MODULE_AUTHOR ("Frodo Looijaard <frodol@dds.nl>, "
            "Philip Edelbrock <phil@netroedge.com>, "
            "and Mark D. Studebaker <mdsxyz123@yahoo.com>");
MODULE_DESCRIPTION("I801 SMBus driver");
MODULE_LICENSE("GPL");

module_init(i2c_i801_init);
module_exit(i2c_i801_exit);

Generated by  Doxygen 1.6.0   Back to index