Logo Search packages:      
Sourcecode: linux version File versions  Download package

ipath_driver.c

/*
 * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
 * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
 *
 * This software is available to you under a choice of one of two
 * licenses.  You may choose to be licensed under the terms of the GNU
 * General Public License (GPL) Version 2, available from the file
 * COPYING in the main directory of this source tree, or the
 * OpenIB.org BSD license below:
 *
 *     Redistribution and use in source and binary forms, with or
 *     without modification, are permitted provided that the following
 *     conditions are met:
 *
 *      - Redistributions of source code must retain the above
 *        copyright notice, this list of conditions and the following
 *        disclaimer.
 *
 *      - Redistributions in binary form must reproduce the above
 *        copyright notice, this list of conditions and the following
 *        disclaimer in the documentation and/or other materials
 *        provided with the distribution.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */

#include <linux/spinlock.h>
#include <linux/idr.h>
#include <linux/pci.h>
#include <linux/io.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/vmalloc.h>

#include "ipath_kernel.h"
#include "ipath_verbs.h"
#include "ipath_common.h"

static void ipath_update_pio_bufs(struct ipath_devdata *);

const char *ipath_get_unit_name(int unit)
{
      static char iname[16];
      snprintf(iname, sizeof iname, "infinipath%u", unit);
      return iname;
}

#define DRIVER_LOAD_MSG "QLogic " IPATH_DRV_NAME " loaded: "
#define PFX IPATH_DRV_NAME ": "

/*
 * The size has to be longer than this string, so we can append
 * board/chip information to it in the init code.
 */
const char ib_ipath_version[] = IPATH_IDSTR "\n";

static struct idr unit_table;
DEFINE_SPINLOCK(ipath_devs_lock);
LIST_HEAD(ipath_dev_list);

wait_queue_head_t ipath_state_wait;

unsigned ipath_debug = __IPATH_INFO;

module_param_named(debug, ipath_debug, uint, S_IWUSR | S_IRUGO);
MODULE_PARM_DESC(debug, "mask for debug prints");
EXPORT_SYMBOL_GPL(ipath_debug);

MODULE_LICENSE("GPL");
MODULE_AUTHOR("QLogic <support@pathscale.com>");
MODULE_DESCRIPTION("QLogic InfiniPath driver");

const char *ipath_ibcstatus_str[] = {
      "Disabled",
      "LinkUp",
      "PollActive",
      "PollQuiet",
      "SleepDelay",
      "SleepQuiet",
      "LState6",        /* unused */
      "LState7",        /* unused */
      "CfgDebounce",
      "CfgRcvfCfg",
      "CfgWaitRmt",
      "CfgIdle",
      "RecovRetrain",
      "LState0xD",            /* unused */
      "RecovWaitRmt",
      "RecovIdle",
};

static void __devexit ipath_remove_one(struct pci_dev *);
static int __devinit ipath_init_one(struct pci_dev *,
                            const struct pci_device_id *);

/* Only needed for registration, nothing else needs this info */
#define PCI_VENDOR_ID_PATHSCALE 0x1fc1
#define PCI_DEVICE_ID_INFINIPATH_HT 0xd
#define PCI_DEVICE_ID_INFINIPATH_PE800 0x10

/* Number of seconds before our card status check...  */
#define STATUS_TIMEOUT 60

static const struct pci_device_id ipath_pci_tbl[] = {
      { PCI_DEVICE(PCI_VENDOR_ID_PATHSCALE, PCI_DEVICE_ID_INFINIPATH_HT) },
      { PCI_DEVICE(PCI_VENDOR_ID_PATHSCALE, PCI_DEVICE_ID_INFINIPATH_PE800) },
      { 0, }
};

MODULE_DEVICE_TABLE(pci, ipath_pci_tbl);

static struct pci_driver ipath_driver = {
      .name = IPATH_DRV_NAME,
      .probe = ipath_init_one,
      .remove = __devexit_p(ipath_remove_one),
      .id_table = ipath_pci_tbl,
};

static void ipath_check_status(struct work_struct *work)
{
      struct ipath_devdata *dd = container_of(work, struct ipath_devdata,
                                    status_work.work);

      /*
       * If we don't have any interrupts, let the user know and
       * don't bother checking again.
       */
      if (dd->ipath_int_counter == 0)
            dev_err(&dd->pcidev->dev, "No interrupts detected.\n");
}

static inline void read_bars(struct ipath_devdata *dd, struct pci_dev *dev,
                       u32 *bar0, u32 *bar1)
{
      int ret;

      ret = pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, bar0);
      if (ret)
            ipath_dev_err(dd, "failed to read bar0 before enable: "
                        "error %d\n", -ret);

      ret = pci_read_config_dword(dev, PCI_BASE_ADDRESS_1, bar1);
      if (ret)
            ipath_dev_err(dd, "failed to read bar1 before enable: "
                        "error %d\n", -ret);

      ipath_dbg("Read bar0 %x bar1 %x\n", *bar0, *bar1);
}

static void ipath_free_devdata(struct pci_dev *pdev,
                         struct ipath_devdata *dd)
{
      unsigned long flags;

      pci_set_drvdata(pdev, NULL);

      if (dd->ipath_unit != -1) {
            spin_lock_irqsave(&ipath_devs_lock, flags);
            idr_remove(&unit_table, dd->ipath_unit);
            list_del(&dd->ipath_list);
            spin_unlock_irqrestore(&ipath_devs_lock, flags);
      }
      vfree(dd);
}

static struct ipath_devdata *ipath_alloc_devdata(struct pci_dev *pdev)
{
      unsigned long flags;
      struct ipath_devdata *dd;
      int ret;

      if (!idr_pre_get(&unit_table, GFP_KERNEL)) {
            dd = ERR_PTR(-ENOMEM);
            goto bail;
      }

      dd = vmalloc(sizeof(*dd));
      if (!dd) {
            dd = ERR_PTR(-ENOMEM);
            goto bail;
      }
      memset(dd, 0, sizeof(*dd));
      dd->ipath_unit = -1;

      spin_lock_irqsave(&ipath_devs_lock, flags);

      ret = idr_get_new(&unit_table, dd, &dd->ipath_unit);
      if (ret < 0) {
            printk(KERN_ERR IPATH_DRV_NAME
                   ": Could not allocate unit ID: error %d\n", -ret);
            ipath_free_devdata(pdev, dd);
            dd = ERR_PTR(ret);
            goto bail_unlock;
      }

      dd->pcidev = pdev;
      pci_set_drvdata(pdev, dd);

      INIT_DELAYED_WORK(&dd->status_work, ipath_check_status);

      list_add(&dd->ipath_list, &ipath_dev_list);

bail_unlock:
      spin_unlock_irqrestore(&ipath_devs_lock, flags);

bail:
      return dd;
}

static inline struct ipath_devdata *__ipath_lookup(int unit)
{
      return idr_find(&unit_table, unit);
}

struct ipath_devdata *ipath_lookup(int unit)
{
      struct ipath_devdata *dd;
      unsigned long flags;

      spin_lock_irqsave(&ipath_devs_lock, flags);
      dd = __ipath_lookup(unit);
      spin_unlock_irqrestore(&ipath_devs_lock, flags);

      return dd;
}

int ipath_count_units(int *npresentp, int *nupp, u32 *maxportsp)
{
      int nunits, npresent, nup;
      struct ipath_devdata *dd;
      unsigned long flags;
      u32 maxports;

      nunits = npresent = nup = maxports = 0;

      spin_lock_irqsave(&ipath_devs_lock, flags);

      list_for_each_entry(dd, &ipath_dev_list, ipath_list) {
            nunits++;
            if ((dd->ipath_flags & IPATH_PRESENT) && dd->ipath_kregbase)
                  npresent++;
            if (dd->ipath_lid &&
                !(dd->ipath_flags & (IPATH_DISABLED | IPATH_LINKDOWN
                               | IPATH_LINKUNK)))
                  nup++;
            if (dd->ipath_cfgports > maxports)
                  maxports = dd->ipath_cfgports;
      }

      spin_unlock_irqrestore(&ipath_devs_lock, flags);

      if (npresentp)
            *npresentp = npresent;
      if (nupp)
            *nupp = nup;
      if (maxportsp)
            *maxportsp = maxports;

      return nunits;
}

/*
 * These next two routines are placeholders in case we don't have per-arch
 * code for controlling write combining.  If explicit control of write
 * combining is not available, performance will probably be awful.
 */

int __attribute__((weak)) ipath_enable_wc(struct ipath_devdata *dd)
{
      return -EOPNOTSUPP;
}

void __attribute__((weak)) ipath_disable_wc(struct ipath_devdata *dd)
{
}

/*
 * Perform a PIO buffer bandwidth write test, to verify proper system
 * configuration.  Even when all the setup calls work, occasionally
 * BIOS or other issues can prevent write combining from working, or
 * can cause other bandwidth problems to the chip.
 *
 * This test simply writes the same buffer over and over again, and
 * measures close to the peak bandwidth to the chip (not testing
 * data bandwidth to the wire).   On chips that use an address-based
 * trigger to send packets to the wire, this is easy.  On chips that
 * use a count to trigger, we want to make sure that the packet doesn't
 * go out on the wire, or trigger flow control checks.
 */
static void ipath_verify_pioperf(struct ipath_devdata *dd)
{
      u32 pbnum, cnt, lcnt;
      u32 __iomem *piobuf;
      u32 *addr;
      u64 msecs, emsecs;

      piobuf = ipath_getpiobuf(dd, &pbnum);
      if (!piobuf) {
            dev_info(&dd->pcidev->dev,
                  "No PIObufs for checking perf, skipping\n");
            return;
      }

      /*
       * Enough to give us a reasonable test, less than piobuf size, and
       * likely multiple of store buffer length.
       */
      cnt = 1024;

      addr = vmalloc(cnt);
      if (!addr) {
            dev_info(&dd->pcidev->dev,
                  "Couldn't get memory for checking PIO perf,"
                  " skipping\n");
            goto done;
      }

      preempt_disable();  /* we want reasonably accurate elapsed time */
      msecs = 1 + jiffies_to_msecs(jiffies);
      for (lcnt = 0; lcnt < 10000U; lcnt++) {
            /* wait until we cross msec boundary */
            if (jiffies_to_msecs(jiffies) >= msecs)
                  break;
            udelay(1);
      }

      writeq(0, piobuf); /* length 0, no dwords actually sent */
      ipath_flush_wc();

      /*
       * this is only roughly accurate, since even with preempt we
       * still take interrupts that could take a while.   Running for
       * >= 5 msec seems to get us "close enough" to accurate values
       */
      msecs = jiffies_to_msecs(jiffies);
      for (emsecs = lcnt = 0; emsecs <= 5UL; lcnt++) {
            __iowrite32_copy(piobuf + 64, addr, cnt >> 2);
            emsecs = jiffies_to_msecs(jiffies) - msecs;
      }

      /* 1 GiB/sec, slightly over IB SDR line rate */
      if (lcnt < (emsecs * 1024U))
            ipath_dev_err(dd,
                  "Performance problem: bandwidth to PIO buffers is "
                  "only %u MiB/sec\n",
                  lcnt / (u32) emsecs);
      else
            ipath_dbg("PIO buffer bandwidth %u MiB/sec is OK\n",
                  lcnt / (u32) emsecs);

      preempt_enable();

      vfree(addr);

done:
      /* disarm piobuf, so it's available again */
      ipath_disarm_piobufs(dd, pbnum, 1);
}

static int __devinit ipath_init_one(struct pci_dev *pdev,
                            const struct pci_device_id *ent)
{
      int ret, len, j;
      struct ipath_devdata *dd;
      unsigned long long addr;
      u32 bar0 = 0, bar1 = 0;

      dd = ipath_alloc_devdata(pdev);
      if (IS_ERR(dd)) {
            ret = PTR_ERR(dd);
            printk(KERN_ERR IPATH_DRV_NAME
                   ": Could not allocate devdata: error %d\n", -ret);
            goto bail;
      }

      ipath_cdbg(VERBOSE, "initializing unit #%u\n", dd->ipath_unit);

      ret = pci_enable_device(pdev);
      if (ret) {
            /* This can happen iff:
             *
             * We did a chip reset, and then failed to reprogram the
             * BAR, or the chip reset due to an internal error.  We then
             * unloaded the driver and reloaded it.
             *
             * Both reset cases set the BAR back to initial state.  For
             * the latter case, the AER sticky error bit at offset 0x718
             * should be set, but the Linux kernel doesn't yet know
             * about that, it appears.  If the original BAR was retained
             * in the kernel data structures, this may be OK.
             */
            ipath_dev_err(dd, "enable unit %d failed: error %d\n",
                        dd->ipath_unit, -ret);
            goto bail_devdata;
      }
      addr = pci_resource_start(pdev, 0);
      len = pci_resource_len(pdev, 0);
      ipath_cdbg(VERBOSE, "regbase (0) %llx len %d pdev->irq %d, vend %x/%x "
               "driver_data %lx\n", addr, len, pdev->irq, ent->vendor,
               ent->device, ent->driver_data);

      read_bars(dd, pdev, &bar0, &bar1);

      if (!bar1 && !(bar0 & ~0xf)) {
            if (addr) {
                  dev_info(&pdev->dev, "BAR is 0 (probable RESET), "
                         "rewriting as %llx\n", addr);
                  ret = pci_write_config_dword(
                        pdev, PCI_BASE_ADDRESS_0, addr);
                  if (ret) {
                        ipath_dev_err(dd, "rewrite of BAR0 "
                                    "failed: err %d\n", -ret);
                        goto bail_disable;
                  }
                  ret = pci_write_config_dword(
                        pdev, PCI_BASE_ADDRESS_1, addr >> 32);
                  if (ret) {
                        ipath_dev_err(dd, "rewrite of BAR1 "
                                    "failed: err %d\n", -ret);
                        goto bail_disable;
                  }
            } else {
                  ipath_dev_err(dd, "BAR is 0 (probable RESET), "
                              "not usable until reboot\n");
                  ret = -ENODEV;
                  goto bail_disable;
            }
      }

      ret = pci_request_regions(pdev, IPATH_DRV_NAME);
      if (ret) {
            dev_info(&pdev->dev, "pci_request_regions unit %u fails: "
                   "err %d\n", dd->ipath_unit, -ret);
            goto bail_disable;
      }

      ret = pci_set_dma_mask(pdev, DMA_64BIT_MASK);
      if (ret) {
            /*
             * if the 64 bit setup fails, try 32 bit.  Some systems
             * do not setup 64 bit maps on systems with 2GB or less
             * memory installed.
             */
            ret = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
            if (ret) {
                  dev_info(&pdev->dev,
                        "Unable to set DMA mask for unit %u: %d\n",
                        dd->ipath_unit, ret);
                  goto bail_regions;
            }
            else {
                  ipath_dbg("No 64bit DMA mask, used 32 bit mask\n");
                  ret = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
                  if (ret)
                        dev_info(&pdev->dev,
                              "Unable to set DMA consistent mask "
                              "for unit %u: %d\n",
                              dd->ipath_unit, ret);

            }
      }
      else {
            ret = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
            if (ret)
                  dev_info(&pdev->dev,
                        "Unable to set DMA consistent mask "
                        "for unit %u: %d\n",
                        dd->ipath_unit, ret);
      }

      pci_set_master(pdev);

      /*
       * Save BARs to rewrite after device reset.  Save all 64 bits of
       * BAR, just in case.
       */
      dd->ipath_pcibar0 = addr;
      dd->ipath_pcibar1 = addr >> 32;
      dd->ipath_deviceid = ent->device;   /* save for later use */
      dd->ipath_vendorid = ent->vendor;

      /* setup the chip-specific functions, as early as possible. */
      switch (ent->device) {
      case PCI_DEVICE_ID_INFINIPATH_HT:
#ifdef CONFIG_HT_IRQ
            ipath_init_iba6110_funcs(dd);
            break;
#else
            ipath_dev_err(dd, "QLogic HT device 0x%x cannot work if "
                        "CONFIG_HT_IRQ is not enabled\n", ent->device);
            return -ENODEV;
#endif
      case PCI_DEVICE_ID_INFINIPATH_PE800:
#ifdef CONFIG_PCI_MSI
            ipath_init_iba6120_funcs(dd);
            break;
#else
            ipath_dev_err(dd, "QLogic PCIE device 0x%x cannot work if "
                        "CONFIG_PCI_MSI is not enabled\n", ent->device);
            return -ENODEV;
#endif
      default:
            ipath_dev_err(dd, "Found unknown QLogic deviceid 0x%x, "
                        "failing\n", ent->device);
            return -ENODEV;
      }

      for (j = 0; j < 6; j++) {
            if (!pdev->resource[j].start)
                  continue;
            ipath_cdbg(VERBOSE, "BAR %d start %llx, end %llx, len %llx\n",
                     j, (unsigned long long)pdev->resource[j].start,
                     (unsigned long long)pdev->resource[j].end,
                     (unsigned long long)pci_resource_len(pdev, j));
      }

      if (!addr) {
            ipath_dev_err(dd, "No valid address in BAR 0!\n");
            ret = -ENODEV;
            goto bail_regions;
      }

      dd->ipath_pcirev = pdev->revision;

#if defined(__powerpc__)
      /* There isn't a generic way to specify writethrough mappings */
      dd->ipath_kregbase = __ioremap(addr, len,
            (_PAGE_NO_CACHE|_PAGE_WRITETHRU));
#else
      dd->ipath_kregbase = ioremap_nocache(addr, len);
#endif

      if (!dd->ipath_kregbase) {
            ipath_dbg("Unable to map io addr %llx to kvirt, failing\n",
                    addr);
            ret = -ENOMEM;
            goto bail_iounmap;
      }
      dd->ipath_kregend = (u64 __iomem *)
            ((void __iomem *)dd->ipath_kregbase + len);
      dd->ipath_physaddr = addr;    /* used for io_remap, etc. */
      /* for user mmap */
      ipath_cdbg(VERBOSE, "mapped io addr %llx to kregbase %p\n",
               addr, dd->ipath_kregbase);

      /*
       * clear ipath_flags here instead of in ipath_init_chip as it is set
       * by ipath_setup_htconfig.
       */
      dd->ipath_flags = 0;
      dd->ipath_lli_counter = 0;
      dd->ipath_lli_errors = 0;

      if (dd->ipath_f_bus(dd, pdev))
            ipath_dev_err(dd, "Failed to setup config space; "
                        "continuing anyway\n");

      /*
       * set up our interrupt handler; IRQF_SHARED probably not needed,
       * since MSI interrupts shouldn't be shared but won't  hurt for now.
       * check 0 irq after we return from chip-specific bus setup, since
       * that can affect this due to setup
       */
      if (!dd->ipath_irq)
            ipath_dev_err(dd, "irq is 0, BIOS error?  Interrupts won't "
                        "work\n");
      else {
            ret = request_irq(dd->ipath_irq, ipath_intr, IRQF_SHARED,
                          IPATH_DRV_NAME, dd);
            if (ret) {
                  ipath_dev_err(dd, "Couldn't setup irq handler, "
                              "irq=%d: %d\n", dd->ipath_irq, ret);
                  goto bail_iounmap;
            }
      }

      ret = ipath_init_chip(dd, 0); /* do the chip-specific init */
      if (ret)
            goto bail_irqsetup;

      ret = ipath_enable_wc(dd);

      if (ret) {
            ipath_dev_err(dd, "Write combining not enabled "
                        "(err %d): performance may be poor\n",
                        -ret);
            ret = 0;
      }

      ipath_verify_pioperf(dd);

      ipath_device_create_group(&pdev->dev, dd);
      ipathfs_add_device(dd);
      ipath_user_add(dd);
      ipath_diag_add(dd);
      ipath_register_ib_device(dd);

      /* Check that card status in STATUS_TIMEOUT seconds. */
      schedule_delayed_work(&dd->status_work, HZ * STATUS_TIMEOUT);

      goto bail;

bail_irqsetup:
      if (pdev->irq) free_irq(pdev->irq, dd);

bail_iounmap:
      iounmap((volatile void __iomem *) dd->ipath_kregbase);

bail_regions:
      pci_release_regions(pdev);

bail_disable:
      pci_disable_device(pdev);

bail_devdata:
      ipath_free_devdata(pdev, dd);

bail:
      return ret;
}

static void __devexit cleanup_device(struct ipath_devdata *dd)
{
      int port;

      if (*dd->ipath_statusp & IPATH_STATUS_CHIP_PRESENT) {
            /* can't do anything more with chip; needs re-init */
            *dd->ipath_statusp &= ~IPATH_STATUS_CHIP_PRESENT;
            if (dd->ipath_kregbase) {
                  /*
                   * if we haven't already cleaned up before these are
                   * to ensure any register reads/writes "fail" until
                   * re-init
                   */
                  dd->ipath_kregbase = NULL;
                  dd->ipath_uregbase = 0;
                  dd->ipath_sregbase = 0;
                  dd->ipath_cregbase = 0;
                  dd->ipath_kregsize = 0;
            }
            ipath_disable_wc(dd);
      }

      if (dd->ipath_pioavailregs_dma) {
            dma_free_coherent(&dd->pcidev->dev, PAGE_SIZE,
                          (void *) dd->ipath_pioavailregs_dma,
                          dd->ipath_pioavailregs_phys);
            dd->ipath_pioavailregs_dma = NULL;
      }
      if (dd->ipath_dummy_hdrq) {
            dma_free_coherent(&dd->pcidev->dev,
                  dd->ipath_pd[0]->port_rcvhdrq_size,
                  dd->ipath_dummy_hdrq, dd->ipath_dummy_hdrq_phys);
            dd->ipath_dummy_hdrq = NULL;
      }

      if (dd->ipath_pageshadow) {
            struct page **tmpp = dd->ipath_pageshadow;
            dma_addr_t *tmpd = dd->ipath_physshadow;
            int i, cnt = 0;

            ipath_cdbg(VERBOSE, "Unlocking any expTID pages still "
                     "locked\n");
            for (port = 0; port < dd->ipath_cfgports; port++) {
                  int port_tidbase = port * dd->ipath_rcvtidcnt;
                  int maxtid = port_tidbase + dd->ipath_rcvtidcnt;
                  for (i = port_tidbase; i < maxtid; i++) {
                        if (!tmpp[i])
                              continue;
                        pci_unmap_page(dd->pcidev, tmpd[i],
                              PAGE_SIZE, PCI_DMA_FROMDEVICE);
                        ipath_release_user_pages(&tmpp[i], 1);
                        tmpp[i] = NULL;
                        cnt++;
                  }
            }
            if (cnt) {
                  ipath_stats.sps_pageunlocks += cnt;
                  ipath_cdbg(VERBOSE, "There were still %u expTID "
                           "entries locked\n", cnt);
            }
            if (ipath_stats.sps_pagelocks ||
                ipath_stats.sps_pageunlocks)
                  ipath_cdbg(VERBOSE, "%llu pages locked, %llu "
                           "unlocked via ipath_m{un}lock\n",
                           (unsigned long long)
                           ipath_stats.sps_pagelocks,
                           (unsigned long long)
                           ipath_stats.sps_pageunlocks);

            ipath_cdbg(VERBOSE, "Free shadow page tid array at %p\n",
                     dd->ipath_pageshadow);
            tmpp = dd->ipath_pageshadow;
            dd->ipath_pageshadow = NULL;
            vfree(tmpp);
      }

      /*
       * free any resources still in use (usually just kernel ports)
       * at unload; we do for portcnt, not cfgports, because cfgports
       * could have changed while we were loaded.
       */
      for (port = 0; port < dd->ipath_portcnt; port++) {
            struct ipath_portdata *pd = dd->ipath_pd[port];
            dd->ipath_pd[port] = NULL;
            ipath_free_pddata(dd, pd);
      }
      kfree(dd->ipath_pd);
      /*
       * debuggability, in case some cleanup path tries to use it
       * after this
       */
      dd->ipath_pd = NULL;
}

static void __devexit ipath_remove_one(struct pci_dev *pdev)
{
      struct ipath_devdata *dd = pci_get_drvdata(pdev);

      ipath_cdbg(VERBOSE, "removing, pdev=%p, dd=%p\n", pdev, dd);

      /*
       * disable the IB link early, to be sure no new packets arrive, which
       * complicates the shutdown process
       */
      ipath_shutdown_device(dd);

      cancel_delayed_work(&dd->status_work);
      flush_scheduled_work();

      if (dd->verbs_dev)
            ipath_unregister_ib_device(dd->verbs_dev);

      ipath_diag_remove(dd);
      ipath_user_remove(dd);
      ipathfs_remove_device(dd);
      ipath_device_remove_group(&pdev->dev, dd);

      ipath_cdbg(VERBOSE, "Releasing pci memory regions, dd %p, "
               "unit %u\n", dd, (u32) dd->ipath_unit);

      cleanup_device(dd);

      /*
       * turn off rcv, send, and interrupts for all ports, all drivers
       * should also hard reset the chip here?
       * free up port 0 (kernel) rcvhdr, egr bufs, and eventually tid bufs
       * for all versions of the driver, if they were allocated
       */
      if (dd->ipath_irq) {
            ipath_cdbg(VERBOSE, "unit %u free irq %d\n",
                     dd->ipath_unit, dd->ipath_irq);
            dd->ipath_f_free_irq(dd);
      } else
            ipath_dbg("irq is 0, not doing free_irq "
                    "for unit %u\n", dd->ipath_unit);
      /*
       * we check for NULL here, because it's outside
       * the kregbase check, and we need to call it
       * after the free_irq.  Thus it's possible that
       * the function pointers were never initialized.
       */
      if (dd->ipath_f_cleanup)
            /* clean up chip-specific stuff */
            dd->ipath_f_cleanup(dd);

      ipath_cdbg(VERBOSE, "Unmapping kregbase %p\n", dd->ipath_kregbase);
      iounmap((volatile void __iomem *) dd->ipath_kregbase);
      pci_release_regions(pdev);
      ipath_cdbg(VERBOSE, "calling pci_disable_device\n");
      pci_disable_device(pdev);

      ipath_free_devdata(pdev, dd);
}

/* general driver use */
DEFINE_MUTEX(ipath_mutex);

static DEFINE_SPINLOCK(ipath_pioavail_lock);

/**
 * ipath_disarm_piobufs - cancel a range of PIO buffers
 * @dd: the infinipath device
 * @first: the first PIO buffer to cancel
 * @cnt: the number of PIO buffers to cancel
 *
 * cancel a range of PIO buffers, used when they might be armed, but
 * not triggered.  Used at init to ensure buffer state, and also user
 * process close, in case it died while writing to a PIO buffer
 * Also after errors.
 */
void ipath_disarm_piobufs(struct ipath_devdata *dd, unsigned first,
                    unsigned cnt)
{
      unsigned i, last = first + cnt;
      u64 sendctrl, sendorig;

      ipath_cdbg(PKT, "disarm %u PIObufs first=%u\n", cnt, first);
      sendorig = dd->ipath_sendctrl;
      for (i = first; i < last; i++) {
            sendctrl = sendorig  | INFINIPATH_S_DISARM |
                  (i << INFINIPATH_S_DISARMPIOBUF_SHIFT);
            ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
                         sendctrl);
      }

      /*
       * Write it again with current value, in case ipath_sendctrl changed
       * while we were looping; no critical bits that would require
       * locking.
       *
       * disable PIOAVAILUPD, then re-enable, reading scratch in
       * between.  This seems to avoid a chip timing race that causes
       * pioavail updates to memory to stop.
       */
      ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
                   sendorig & ~INFINIPATH_S_PIOBUFAVAILUPD);
      sendorig = ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
      ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
                   dd->ipath_sendctrl);
}

/**
 * ipath_wait_linkstate - wait for an IB link state change to occur
 * @dd: the infinipath device
 * @state: the state to wait for
 * @msecs: the number of milliseconds to wait
 *
 * wait up to msecs milliseconds for IB link state change to occur for
 * now, take the easy polling route.  Currently used only by
 * ipath_set_linkstate.  Returns 0 if state reached, otherwise
 * -ETIMEDOUT state can have multiple states set, for any of several
 * transitions.
 */
static int ipath_wait_linkstate(struct ipath_devdata *dd, u32 state,
                        int msecs)
{
      dd->ipath_state_wanted = state;
      wait_event_interruptible_timeout(ipath_state_wait,
                               (dd->ipath_flags & state),
                               msecs_to_jiffies(msecs));
      dd->ipath_state_wanted = 0;

      if (!(dd->ipath_flags & state)) {
            u64 val;
            ipath_cdbg(VERBOSE, "Didn't reach linkstate %s within %u"
                     " ms\n",
                     /* test INIT ahead of DOWN, both can be set */
                     (state & IPATH_LINKINIT) ? "INIT" :
                     ((state & IPATH_LINKDOWN) ? "DOWN" :
                      ((state & IPATH_LINKARMED) ? "ARM" : "ACTIVE")),
                     msecs);
            val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus);
            ipath_cdbg(VERBOSE, "ibcc=%llx ibcstatus=%llx (%s)\n",
                     (unsigned long long) ipath_read_kreg64(
                           dd, dd->ipath_kregs->kr_ibcctrl),
                     (unsigned long long) val,
                     ipath_ibcstatus_str[val & 0xf]);
      }
      return (dd->ipath_flags & state) ? 0 : -ETIMEDOUT;
}

/*
 * Decode the error status into strings, deciding whether to always
 * print * it or not depending on "normal packet errors" vs everything
 * else.   Return 1 if "real" errors, otherwise 0 if only packet
 * errors, so caller can decide what to print with the string.
 */
int ipath_decode_err(char *buf, size_t blen, ipath_err_t err)
{
      int iserr = 1;
      *buf = '\0';
      if (err & INFINIPATH_E_PKTERRS) {
            if (!(err & ~INFINIPATH_E_PKTERRS))
                  iserr = 0; // if only packet errors.
            if (ipath_debug & __IPATH_ERRPKTDBG) {
                  if (err & INFINIPATH_E_REBP)
                        strlcat(buf, "EBP ", blen);
                  if (err & INFINIPATH_E_RVCRC)
                        strlcat(buf, "VCRC ", blen);
                  if (err & INFINIPATH_E_RICRC) {
                        strlcat(buf, "CRC ", blen);
                        // clear for check below, so only once
                        err &= INFINIPATH_E_RICRC;
                  }
                  if (err & INFINIPATH_E_RSHORTPKTLEN)
                        strlcat(buf, "rshortpktlen ", blen);
                  if (err & INFINIPATH_E_SDROPPEDDATAPKT)
                        strlcat(buf, "sdroppeddatapkt ", blen);
                  if (err & INFINIPATH_E_SPKTLEN)
                        strlcat(buf, "spktlen ", blen);
            }
            if ((err & INFINIPATH_E_RICRC) &&
                  !(err&(INFINIPATH_E_RVCRC|INFINIPATH_E_REBP)))
                  strlcat(buf, "CRC ", blen);
            if (!iserr)
                  goto done;
      }
      if (err & INFINIPATH_E_RHDRLEN)
            strlcat(buf, "rhdrlen ", blen);
      if (err & INFINIPATH_E_RBADTID)
            strlcat(buf, "rbadtid ", blen);
      if (err & INFINIPATH_E_RBADVERSION)
            strlcat(buf, "rbadversion ", blen);
      if (err & INFINIPATH_E_RHDR)
            strlcat(buf, "rhdr ", blen);
      if (err & INFINIPATH_E_RLONGPKTLEN)
            strlcat(buf, "rlongpktlen ", blen);
      if (err & INFINIPATH_E_RMAXPKTLEN)
            strlcat(buf, "rmaxpktlen ", blen);
      if (err & INFINIPATH_E_RMINPKTLEN)
            strlcat(buf, "rminpktlen ", blen);
      if (err & INFINIPATH_E_SMINPKTLEN)
            strlcat(buf, "sminpktlen ", blen);
      if (err & INFINIPATH_E_RFORMATERR)
            strlcat(buf, "rformaterr ", blen);
      if (err & INFINIPATH_E_RUNSUPVL)
            strlcat(buf, "runsupvl ", blen);
      if (err & INFINIPATH_E_RUNEXPCHAR)
            strlcat(buf, "runexpchar ", blen);
      if (err & INFINIPATH_E_RIBFLOW)
            strlcat(buf, "ribflow ", blen);
      if (err & INFINIPATH_E_SUNDERRUN)
            strlcat(buf, "sunderrun ", blen);
      if (err & INFINIPATH_E_SPIOARMLAUNCH)
            strlcat(buf, "spioarmlaunch ", blen);
      if (err & INFINIPATH_E_SUNEXPERRPKTNUM)
            strlcat(buf, "sunexperrpktnum ", blen);
      if (err & INFINIPATH_E_SDROPPEDSMPPKT)
            strlcat(buf, "sdroppedsmppkt ", blen);
      if (err & INFINIPATH_E_SMAXPKTLEN)
            strlcat(buf, "smaxpktlen ", blen);
      if (err & INFINIPATH_E_SUNSUPVL)
            strlcat(buf, "sunsupVL ", blen);
      if (err & INFINIPATH_E_INVALIDADDR)
            strlcat(buf, "invalidaddr ", blen);
      if (err & INFINIPATH_E_RRCVEGRFULL)
            strlcat(buf, "rcvegrfull ", blen);
      if (err & INFINIPATH_E_RRCVHDRFULL)
            strlcat(buf, "rcvhdrfull ", blen);
      if (err & INFINIPATH_E_IBSTATUSCHANGED)
            strlcat(buf, "ibcstatuschg ", blen);
      if (err & INFINIPATH_E_RIBLOSTLINK)
            strlcat(buf, "riblostlink ", blen);
      if (err & INFINIPATH_E_HARDWARE)
            strlcat(buf, "hardware ", blen);
      if (err & INFINIPATH_E_RESET)
            strlcat(buf, "reset ", blen);
done:
      return iserr;
}

/**
 * get_rhf_errstring - decode RHF errors
 * @err: the err number
 * @msg: the output buffer
 * @len: the length of the output buffer
 *
 * only used one place now, may want more later
 */
static void get_rhf_errstring(u32 err, char *msg, size_t len)
{
      /* if no errors, and so don't need to check what's first */
      *msg = '\0';

      if (err & INFINIPATH_RHF_H_ICRCERR)
            strlcat(msg, "icrcerr ", len);
      if (err & INFINIPATH_RHF_H_VCRCERR)
            strlcat(msg, "vcrcerr ", len);
      if (err & INFINIPATH_RHF_H_PARITYERR)
            strlcat(msg, "parityerr ", len);
      if (err & INFINIPATH_RHF_H_LENERR)
            strlcat(msg, "lenerr ", len);
      if (err & INFINIPATH_RHF_H_MTUERR)
            strlcat(msg, "mtuerr ", len);
      if (err & INFINIPATH_RHF_H_IHDRERR)
            /* infinipath hdr checksum error */
            strlcat(msg, "ipathhdrerr ", len);
      if (err & INFINIPATH_RHF_H_TIDERR)
            strlcat(msg, "tiderr ", len);
      if (err & INFINIPATH_RHF_H_MKERR)
            /* bad port, offset, etc. */
            strlcat(msg, "invalid ipathhdr ", len);
      if (err & INFINIPATH_RHF_H_IBERR)
            strlcat(msg, "iberr ", len);
      if (err & INFINIPATH_RHF_L_SWA)
            strlcat(msg, "swA ", len);
      if (err & INFINIPATH_RHF_L_SWB)
            strlcat(msg, "swB ", len);
}

/**
 * ipath_get_egrbuf - get an eager buffer
 * @dd: the infinipath device
 * @bufnum: the eager buffer to get
 * @err: unused
 *
 * must only be called if ipath_pd[port] is known to be allocated
 */
static inline void *ipath_get_egrbuf(struct ipath_devdata *dd, u32 bufnum,
                             int err)
{
      return dd->ipath_port0_skbinfo ?
            (void *) dd->ipath_port0_skbinfo[bufnum].skb->data : NULL;
}

/**
 * ipath_alloc_skb - allocate an skb and buffer with possible constraints
 * @dd: the infinipath device
 * @gfp_mask: the sk_buff SFP mask
 */
struct sk_buff *ipath_alloc_skb(struct ipath_devdata *dd,
                        gfp_t gfp_mask)
{
      struct sk_buff *skb;
      u32 len;

      /*
       * Only fully supported way to handle this is to allocate lots
       * extra, align as needed, and then do skb_reserve().  That wastes
       * a lot of memory...  I'll have to hack this into infinipath_copy
       * also.
       */

      /*
       * We need 2 extra bytes for ipath_ether data sent in the
       * key header.  In order to keep everything dword aligned,
       * we'll reserve 4 bytes.
       */
      len = dd->ipath_ibmaxlen + 4;

      if (dd->ipath_flags & IPATH_4BYTE_TID) {
            /* We need a 2KB multiple alignment, and there is no way
             * to do it except to allocate extra and then skb_reserve
             * enough to bring it up to the right alignment.
             */
            len += 2047;
      }

      skb = __dev_alloc_skb(len, gfp_mask);
      if (!skb) {
            ipath_dev_err(dd, "Failed to allocate skbuff, length %u\n",
                        len);
            goto bail;
      }

      skb_reserve(skb, 4);

      if (dd->ipath_flags & IPATH_4BYTE_TID) {
            u32 una = (unsigned long)skb->data & 2047;
            if (una)
                  skb_reserve(skb, 2048 - una);
      }

bail:
      return skb;
}

static void ipath_rcv_hdrerr(struct ipath_devdata *dd,
                       u32 eflags,
                       u32 l,
                       u32 etail,
                       u64 *rc)
{
      char emsg[128];
      struct ipath_message_header *hdr;

      get_rhf_errstring(eflags, emsg, sizeof emsg);
      hdr = (struct ipath_message_header *)&rc[1];
      ipath_cdbg(PKT, "RHFerrs %x hdrqtail=%x typ=%u "
               "tlen=%x opcode=%x egridx=%x: %s\n",
               eflags, l,
               ipath_hdrget_rcv_type((__le32 *) rc),
               ipath_hdrget_length_in_bytes((__le32 *) rc),
               be32_to_cpu(hdr->bth[0]) >> 24,
               etail, emsg);

      /* Count local link integrity errors. */
      if (eflags & (INFINIPATH_RHF_H_ICRCERR | INFINIPATH_RHF_H_VCRCERR)) {
            u8 n = (dd->ipath_ibcctrl >>
                  INFINIPATH_IBCC_PHYERRTHRESHOLD_SHIFT) &
                  INFINIPATH_IBCC_PHYERRTHRESHOLD_MASK;

            if (++dd->ipath_lli_counter > n) {
                  dd->ipath_lli_counter = 0;
                  dd->ipath_lli_errors++;
            }
      }
}

/*
 * ipath_kreceive - receive a packet
 * @dd: the infinipath device
 *
 * called from interrupt handler for errors or receive interrupt
 */
void ipath_kreceive(struct ipath_devdata *dd)
{
      u64 *rc;
      void *ebuf;
      const u32 rsize = dd->ipath_rcvhdrentsize;      /* words */
      const u32 maxcnt = dd->ipath_rcvhdrcnt * rsize; /* words */
      u32 etail = -1, l, hdrqtail;
      struct ipath_message_header *hdr;
      u32 eflags, i, etype, tlen, pkttot = 0, updegr=0, reloop=0;
      static u64 totcalls;    /* stats, may eventually remove */

      if (!dd->ipath_hdrqtailptr) {
            ipath_dev_err(dd,
                        "hdrqtailptr not set, can't do receives\n");
            goto bail;
      }

      l = dd->ipath_port0head;
      hdrqtail = (u32) le64_to_cpu(*dd->ipath_hdrqtailptr);
      if (l == hdrqtail)
            goto bail;

reloop:
      for (i = 0; l != hdrqtail; i++) {
            u32 qp;
            u8 *bthbytes;

            rc = (u64 *) (dd->ipath_pd[0]->port_rcvhdrq + (l << 2));
            hdr = (struct ipath_message_header *)&rc[1];
            /*
             * could make a network order version of IPATH_KD_QP, and
             * do the obvious shift before masking to speed this up.
             */
            qp = ntohl(hdr->bth[1]) & 0xffffff;
            bthbytes = (u8 *) hdr->bth;

            eflags = ipath_hdrget_err_flags((__le32 *) rc);
            etype = ipath_hdrget_rcv_type((__le32 *) rc);
            /* total length */
            tlen = ipath_hdrget_length_in_bytes((__le32 *) rc);
            ebuf = NULL;
            if (etype != RCVHQ_RCV_TYPE_EXPECTED) {
                  /*
                   * it turns out that the chips uses an eager buffer
                   * for all non-expected packets, whether it "needs"
                   * one or not.  So always get the index, but don't
                   * set ebuf (so we try to copy data) unless the
                   * length requires it.
                   */
                  etail = ipath_hdrget_index((__le32 *) rc);
                  if (tlen > sizeof(*hdr) ||
                      etype == RCVHQ_RCV_TYPE_NON_KD)
                        ebuf = ipath_get_egrbuf(dd, etail, 0);
            }

            /*
             * both tiderr and ipathhdrerr are set for all plain IB
             * packets; only ipathhdrerr should be set.
             */

            if (etype != RCVHQ_RCV_TYPE_NON_KD && etype !=
                RCVHQ_RCV_TYPE_ERROR && ipath_hdrget_ipath_ver(
                      hdr->iph.ver_port_tid_offset) !=
                IPS_PROTO_VERSION) {
                  ipath_cdbg(PKT, "Bad InfiniPath protocol version "
                           "%x\n", etype);
            }

            if (unlikely(eflags))
                  ipath_rcv_hdrerr(dd, eflags, l, etail, rc);
            else if (etype == RCVHQ_RCV_TYPE_NON_KD) {
                  ipath_ib_rcv(dd->verbs_dev, rc + 1, ebuf, tlen);
                  if (dd->ipath_lli_counter)
                        dd->ipath_lli_counter--;
                  ipath_cdbg(PKT, "typ %x, opcode %x (eager, "
                           "qp=%x), len %x; ignored\n",
                           etype, bthbytes[0], qp, tlen);
            }
            else if (etype == RCVHQ_RCV_TYPE_EAGER)
                  ipath_cdbg(PKT, "typ %x, opcode %x (eager, "
                           "qp=%x), len %x; ignored\n",
                           etype, bthbytes[0], qp, tlen);
            else if (etype == RCVHQ_RCV_TYPE_EXPECTED)
                  ipath_dbg("Bug: Expected TID, opcode %x; ignored\n",
                          be32_to_cpu(hdr->bth[0]) & 0xff);
            else {
                  /*
                   * error packet, type of error      unknown.
                   * Probably type 3, but we don't know, so don't
                   * even try to print the opcode, etc.
                   */
                  ipath_dbg("Error Pkt, but no eflags! egrbuf %x, "
                          "len %x\nhdrq@%lx;hdrq+%x rhf: %llx; "
                          "hdr %llx %llx %llx %llx %llx\n",
                          etail, tlen, (unsigned long) rc, l,
                          (unsigned long long) rc[0],
                          (unsigned long long) rc[1],
                          (unsigned long long) rc[2],
                          (unsigned long long) rc[3],
                          (unsigned long long) rc[4],
                          (unsigned long long) rc[5]);
            }
            l += rsize;
            if (l >= maxcnt)
                  l = 0;
            if (etype != RCVHQ_RCV_TYPE_EXPECTED)
                updegr = 1;
            /*
             * update head regs on last packet, and every 16 packets.
             * Reduce bus traffic, while still trying to prevent
             * rcvhdrq overflows, for when the queue is nearly full
             */
            if (l == hdrqtail || (i && !(i&0xf))) {
                  u64 lval;
                  if (l == hdrqtail)
                        /* request IBA6120 interrupt only on last */
                        lval = dd->ipath_rhdrhead_intr_off | l;
                  else
                        lval = l;
                  (void)ipath_write_ureg(dd, ur_rcvhdrhead, lval, 0);
                  if (updegr) {
                        (void)ipath_write_ureg(dd, ur_rcvegrindexhead,
                                           etail, 0);
                        updegr = 0;
                  }
            }
      }

      if (!dd->ipath_rhdrhead_intr_off && !reloop) {
            /* IBA6110 workaround; we can have a race clearing chip
             * interrupt with another interrupt about to be delivered,
             * and can clear it before it is delivered on the GPIO
             * workaround.  By doing the extra check here for the
             * in-memory tail register updating while we were doing
             * earlier packets, we "almost" guarantee we have covered
             * that case.
             */
            u32 hqtail = (u32)le64_to_cpu(*dd->ipath_hdrqtailptr);
            if (hqtail != hdrqtail) {
                  hdrqtail = hqtail;
                  reloop = 1; /* loop 1 extra time at most */
                  goto reloop;
            }
      }

      pkttot += i;

      dd->ipath_port0head = l;

      if (pkttot > ipath_stats.sps_maxpkts_call)
            ipath_stats.sps_maxpkts_call = pkttot;
      ipath_stats.sps_port0pkts += pkttot;
      ipath_stats.sps_avgpkts_call =
            ipath_stats.sps_port0pkts / ++totcalls;

bail:;
}

/**
 * ipath_update_pio_bufs - update shadow copy of the PIO availability map
 * @dd: the infinipath device
 *
 * called whenever our local copy indicates we have run out of send buffers
 * NOTE: This can be called from interrupt context by some code
 * and from non-interrupt context by ipath_getpiobuf().
 */

static void ipath_update_pio_bufs(struct ipath_devdata *dd)
{
      unsigned long flags;
      int i;
      const unsigned piobregs = (unsigned)dd->ipath_pioavregs;

      /* If the generation (check) bits have changed, then we update the
       * busy bit for the corresponding PIO buffer.  This algorithm will
       * modify positions to the value they already have in some cases
       * (i.e., no change), but it's faster than changing only the bits
       * that have changed.
       *
       * We would like to do this atomicly, to avoid spinlocks in the
       * critical send path, but that's not really possible, given the
       * type of changes, and that this routine could be called on
       * multiple cpu's simultaneously, so we lock in this routine only,
       * to avoid conflicting updates; all we change is the shadow, and
       * it's a single 64 bit memory location, so by definition the update
       * is atomic in terms of what other cpu's can see in testing the
       * bits.  The spin_lock overhead isn't too bad, since it only
       * happens when all buffers are in use, so only cpu overhead, not
       * latency or bandwidth is affected.
       */
#define _IPATH_ALL_CHECKBITS 0x5555555555555555ULL
      if (!dd->ipath_pioavailregs_dma) {
            ipath_dbg("Update shadow pioavail, but regs_dma NULL!\n");
            return;
      }
      if (ipath_debug & __IPATH_VERBDBG) {
            /* only if packet debug and verbose */
            volatile __le64 *dma = dd->ipath_pioavailregs_dma;
            unsigned long *shadow = dd->ipath_pioavailshadow;

            ipath_cdbg(PKT, "Refill avail, dma0=%llx shad0=%lx, "
                     "d1=%llx s1=%lx, d2=%llx s2=%lx, d3=%llx "
                     "s3=%lx\n",
                     (unsigned long long) le64_to_cpu(dma[0]),
                     shadow[0],
                     (unsigned long long) le64_to_cpu(dma[1]),
                     shadow[1],
                     (unsigned long long) le64_to_cpu(dma[2]),
                     shadow[2],
                     (unsigned long long) le64_to_cpu(dma[3]),
                     shadow[3]);
            if (piobregs > 4)
                  ipath_cdbg(
                        PKT, "2nd group, dma4=%llx shad4=%lx, "
                        "d5=%llx s5=%lx, d6=%llx s6=%lx, "
                        "d7=%llx s7=%lx\n",
                        (unsigned long long) le64_to_cpu(dma[4]),
                        shadow[4],
                        (unsigned long long) le64_to_cpu(dma[5]),
                        shadow[5],
                        (unsigned long long) le64_to_cpu(dma[6]),
                        shadow[6],
                        (unsigned long long) le64_to_cpu(dma[7]),
                        shadow[7]);
      }
      spin_lock_irqsave(&ipath_pioavail_lock, flags);
      for (i = 0; i < piobregs; i++) {
            u64 pchbusy, pchg, piov, pnew;
            /*
             * Chip Errata: bug 6641; even and odd qwords>3 are swapped
             */
            if (i > 3) {
                  if (i & 1)
                        piov = le64_to_cpu(
                              dd->ipath_pioavailregs_dma[i - 1]);
                  else
                        piov = le64_to_cpu(
                              dd->ipath_pioavailregs_dma[i + 1]);
            } else
                  piov = le64_to_cpu(dd->ipath_pioavailregs_dma[i]);
            pchg = _IPATH_ALL_CHECKBITS &
                  ~(dd->ipath_pioavailshadow[i] ^ piov);
            pchbusy = pchg << INFINIPATH_SENDPIOAVAIL_BUSY_SHIFT;
            if (pchg && (pchbusy & dd->ipath_pioavailshadow[i])) {
                  pnew = dd->ipath_pioavailshadow[i] & ~pchbusy;
                  pnew |= piov & pchbusy;
                  dd->ipath_pioavailshadow[i] = pnew;
            }
      }
      spin_unlock_irqrestore(&ipath_pioavail_lock, flags);
}

/**
 * ipath_setrcvhdrsize - set the receive header size
 * @dd: the infinipath device
 * @rhdrsize: the receive header size
 *
 * called from user init code, and also layered driver init
 */
int ipath_setrcvhdrsize(struct ipath_devdata *dd, unsigned rhdrsize)
{
      int ret = 0;

      if (dd->ipath_flags & IPATH_RCVHDRSZ_SET) {
            if (dd->ipath_rcvhdrsize != rhdrsize) {
                  dev_info(&dd->pcidev->dev,
                         "Error: can't set protocol header "
                         "size %u, already %u\n",
                         rhdrsize, dd->ipath_rcvhdrsize);
                  ret = -EAGAIN;
            } else
                  ipath_cdbg(VERBOSE, "Reuse same protocol header "
                           "size %u\n", dd->ipath_rcvhdrsize);
      } else if (rhdrsize > (dd->ipath_rcvhdrentsize -
                         (sizeof(u64) / sizeof(u32)))) {
            ipath_dbg("Error: can't set protocol header size %u "
                    "(> max %u)\n", rhdrsize,
                    dd->ipath_rcvhdrentsize -
                    (u32) (sizeof(u64) / sizeof(u32)));
            ret = -EOVERFLOW;
      } else {
            dd->ipath_flags |= IPATH_RCVHDRSZ_SET;
            dd->ipath_rcvhdrsize = rhdrsize;
            ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvhdrsize,
                         dd->ipath_rcvhdrsize);
            ipath_cdbg(VERBOSE, "Set protocol header size to %u\n",
                     dd->ipath_rcvhdrsize);
      }
      return ret;
}

/**
 * ipath_getpiobuf - find an available pio buffer
 * @dd: the infinipath device
 * @pbufnum: the buffer number is placed here
 *
 * do appropriate marking as busy, etc.
 * returns buffer number if one found (>=0), negative number is error.
 * Used by ipath_layer_send
 */
u32 __iomem *ipath_getpiobuf(struct ipath_devdata *dd, u32 * pbufnum)
{
      int i, j, starti, updated = 0;
      unsigned piobcnt, iter;
      unsigned long flags;
      unsigned long *shadow = dd->ipath_pioavailshadow;
      u32 __iomem *buf;

      piobcnt = (unsigned)(dd->ipath_piobcnt2k
                       + dd->ipath_piobcnt4k);
      starti = dd->ipath_lastport_piobuf;
      iter = piobcnt - starti;
      if (dd->ipath_upd_pio_shadow) {
            /*
             * Minor optimization.  If we had no buffers on last call,
             * start out by doing the update; continue and do scan even
             * if no buffers were updated, to be paranoid
             */
            ipath_update_pio_bufs(dd);
            /* we scanned here, don't do it at end of scan */
            updated = 1;
            i = starti;
      } else
            i = dd->ipath_lastpioindex;

rescan:
      /*
       * while test_and_set_bit() is atomic, we do that and then the
       * change_bit(), and the pair is not.  See if this is the cause
       * of the remaining armlaunch errors.
       */
      spin_lock_irqsave(&ipath_pioavail_lock, flags);
      for (j = 0; j < iter; j++, i++) {
            if (i >= piobcnt)
                  i = starti;
            /*
             * To avoid bus lock overhead, we first find a candidate
             * buffer, then do the test and set, and continue if that
             * fails.
             */
            if (test_bit((2 * i) + 1, shadow) ||
                test_and_set_bit((2 * i) + 1, shadow))
                  continue;
            /* flip generation bit */
            change_bit(2 * i, shadow);
            break;
      }
      spin_unlock_irqrestore(&ipath_pioavail_lock, flags);

      if (j == iter) {
            volatile __le64 *dma = dd->ipath_pioavailregs_dma;

            /*
             * first time through; shadow exhausted, but may be real
             * buffers available, so go see; if any updated, rescan
             * (once)
             */
            if (!updated) {
                  ipath_update_pio_bufs(dd);
                  updated = 1;
                  i = starti;
                  goto rescan;
            }
            dd->ipath_upd_pio_shadow = 1;
            /*
             * not atomic, but if we lose one once in a while, that's OK
             */
            ipath_stats.sps_nopiobufs++;
            if (!(++dd->ipath_consec_nopiobuf % 100000)) {
                  ipath_dbg(
                        "%u pio sends with no bufavail; dmacopy: "
                        "%llx %llx %llx %llx; shadow:  "
                        "%lx %lx %lx %lx\n",
                        dd->ipath_consec_nopiobuf,
                        (unsigned long long) le64_to_cpu(dma[0]),
                        (unsigned long long) le64_to_cpu(dma[1]),
                        (unsigned long long) le64_to_cpu(dma[2]),
                        (unsigned long long) le64_to_cpu(dma[3]),
                        shadow[0], shadow[1], shadow[2],
                        shadow[3]);
                  /*
                   * 4 buffers per byte, 4 registers above, cover rest
                   * below
                   */
                  if ((dd->ipath_piobcnt2k + dd->ipath_piobcnt4k) >
                      (sizeof(shadow[0]) * 4 * 4))
                        ipath_dbg("2nd group: dmacopy: %llx %llx "
                                "%llx %llx; shadow: %lx %lx "
                                "%lx %lx\n",
                                (unsigned long long)
                                le64_to_cpu(dma[4]),
                                (unsigned long long)
                                le64_to_cpu(dma[5]),
                                (unsigned long long)
                                le64_to_cpu(dma[6]),
                                (unsigned long long)
                                le64_to_cpu(dma[7]),
                                shadow[4], shadow[5],
                                shadow[6], shadow[7]);
            }
            buf = NULL;
            goto bail;
      }

      /*
       * set next starting place.  Since it's just an optimization,
       * it doesn't matter who wins on this, so no locking
       */
      dd->ipath_lastpioindex = i + 1;
      if (dd->ipath_upd_pio_shadow)
            dd->ipath_upd_pio_shadow = 0;
      if (dd->ipath_consec_nopiobuf)
            dd->ipath_consec_nopiobuf = 0;
      if (i < dd->ipath_piobcnt2k)
            buf = (u32 __iomem *) (dd->ipath_pio2kbase +
                               i * dd->ipath_palign);
      else
            buf = (u32 __iomem *)
                  (dd->ipath_pio4kbase +
                   (i - dd->ipath_piobcnt2k) * dd->ipath_4kalign);
      ipath_cdbg(VERBOSE, "Return piobuf%u %uk @ %p\n",
               i, (i < dd->ipath_piobcnt2k) ? 2 : 4, buf);
      if (pbufnum)
            *pbufnum = i;

bail:
      return buf;
}

/**
 * ipath_create_rcvhdrq - create a receive header queue
 * @dd: the infinipath device
 * @pd: the port data
 *
 * this must be contiguous memory (from an i/o perspective), and must be
 * DMA'able (which means for some systems, it will go through an IOMMU,
 * or be forced into a low address range).
 */
int ipath_create_rcvhdrq(struct ipath_devdata *dd,
                   struct ipath_portdata *pd)
{
      int ret = 0;

      if (!pd->port_rcvhdrq) {
            dma_addr_t phys_hdrqtail;
            gfp_t gfp_flags = GFP_USER | __GFP_COMP;
            int amt = ALIGN(dd->ipath_rcvhdrcnt * dd->ipath_rcvhdrentsize *
                        sizeof(u32), PAGE_SIZE);

            pd->port_rcvhdrq = dma_alloc_coherent(
                  &dd->pcidev->dev, amt, &pd->port_rcvhdrq_phys,
                  gfp_flags);

            if (!pd->port_rcvhdrq) {
                  ipath_dev_err(dd, "attempt to allocate %d bytes "
                              "for port %u rcvhdrq failed\n",
                              amt, pd->port_port);
                  ret = -ENOMEM;
                  goto bail;
            }
            pd->port_rcvhdrtail_kvaddr = dma_alloc_coherent(
                  &dd->pcidev->dev, PAGE_SIZE, &phys_hdrqtail, GFP_KERNEL);
            if (!pd->port_rcvhdrtail_kvaddr) {
                  ipath_dev_err(dd, "attempt to allocate 1 page "
                              "for port %u rcvhdrqtailaddr failed\n",
                              pd->port_port);
                  ret = -ENOMEM;
                  dma_free_coherent(&dd->pcidev->dev, amt,
                                pd->port_rcvhdrq, pd->port_rcvhdrq_phys);
                  pd->port_rcvhdrq = NULL;
                  goto bail;
            }
            pd->port_rcvhdrqtailaddr_phys = phys_hdrqtail;

            pd->port_rcvhdrq_size = amt;

            ipath_cdbg(VERBOSE, "%d pages at %p (phys %lx) size=%lu "
                     "for port %u rcvhdr Q\n",
                     amt >> PAGE_SHIFT, pd->port_rcvhdrq,
                     (unsigned long) pd->port_rcvhdrq_phys,
                     (unsigned long) pd->port_rcvhdrq_size,
                     pd->port_port);

            ipath_cdbg(VERBOSE, "port %d hdrtailaddr, %llx physical\n",
                     pd->port_port,
                     (unsigned long long) phys_hdrqtail);
      }
      else
            ipath_cdbg(VERBOSE, "reuse port %d rcvhdrq @%p %llx phys; "
                     "hdrtailaddr@%p %llx physical\n",
                     pd->port_port, pd->port_rcvhdrq,
                     (unsigned long long) pd->port_rcvhdrq_phys,
                     pd->port_rcvhdrtail_kvaddr, (unsigned long long)
                     pd->port_rcvhdrqtailaddr_phys);

      /* clear for security and sanity on each use */
      memset(pd->port_rcvhdrq, 0, pd->port_rcvhdrq_size);
      memset(pd->port_rcvhdrtail_kvaddr, 0, PAGE_SIZE);

      /*
       * tell chip each time we init it, even if we are re-using previous
       * memory (we zero the register at process close)
       */
      ipath_write_kreg_port(dd, dd->ipath_kregs->kr_rcvhdrtailaddr,
                        pd->port_port, pd->port_rcvhdrqtailaddr_phys);
      ipath_write_kreg_port(dd, dd->ipath_kregs->kr_rcvhdraddr,
                        pd->port_port, pd->port_rcvhdrq_phys);

      ret = 0;
bail:
      return ret;
}

int ipath_waitfor_complete(struct ipath_devdata *dd, ipath_kreg reg_id,
                     u64 bits_to_wait_for, u64 * valp)
{
      unsigned long timeout;
      u64 lastval, val;
      int ret;

      lastval = ipath_read_kreg64(dd, reg_id);
      /* wait a ridiculously long time */
      timeout = jiffies + msecs_to_jiffies(5);
      do {
            val = ipath_read_kreg64(dd, reg_id);
            /* set so they have something, even on failures. */
            *valp = val;
            if ((val & bits_to_wait_for) == bits_to_wait_for) {
                  ret = 0;
                  break;
            }
            if (val != lastval)
                  ipath_cdbg(VERBOSE, "Changed from %llx to %llx, "
                           "waiting for %llx bits\n",
                           (unsigned long long) lastval,
                           (unsigned long long) val,
                           (unsigned long long) bits_to_wait_for);
            cond_resched();
            if (time_after(jiffies, timeout)) {
                  ipath_dbg("Didn't get bits %llx in register 0x%x, "
                          "got %llx\n",
                          (unsigned long long) bits_to_wait_for,
                          reg_id, (unsigned long long) *valp);
                  ret = -ENODEV;
                  break;
            }
      } while (1);

      return ret;
}

/**
 * ipath_waitfor_mdio_cmdready - wait for last command to complete
 * @dd: the infinipath device
 *
 * Like ipath_waitfor_complete(), but we wait for the CMDVALID bit to go
 * away indicating the last command has completed.  It doesn't return data
 */
int ipath_waitfor_mdio_cmdready(struct ipath_devdata *dd)
{
      unsigned long timeout;
      u64 val;
      int ret;

      /* wait a ridiculously long time */
      timeout = jiffies + msecs_to_jiffies(5);
      do {
            val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_mdio);
            if (!(val & IPATH_MDIO_CMDVALID)) {
                  ret = 0;
                  break;
            }
            cond_resched();
            if (time_after(jiffies, timeout)) {
                  ipath_dbg("CMDVALID stuck in mdio reg? (%llx)\n",
                          (unsigned long long) val);
                  ret = -ENODEV;
                  break;
            }
      } while (1);

      return ret;
}


/*
 * Flush all sends that might be in the ready to send state, as well as any
 * that are in the process of being sent.   Used whenever we need to be
 * sure the send side is idle.  Cleans up all buffer state by canceling
 * all pio buffers, and issuing an abort, which cleans up anything in the
 * launch fifo.  The cancel is superfluous on some chip versions, but
 * it's safer to always do it.
 * PIOAvail bits are updated by the chip as if normal send had happened.
 */
void ipath_cancel_sends(struct ipath_devdata *dd, int restore_sendctrl)
{
      ipath_dbg("Cancelling all in-progress send buffers\n");
      dd->ipath_lastcancel = jiffies+HZ/2; /* skip armlaunch errs a bit */
      /*
       * the abort bit is auto-clearing.  We read scratch to be sure
       * that cancels and the abort have taken effect in the chip.
       */
      ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
            INFINIPATH_S_ABORT);
      ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
      ipath_disarm_piobufs(dd, 0,
            (unsigned)(dd->ipath_piobcnt2k + dd->ipath_piobcnt4k));
      if (restore_sendctrl) /* else done by caller later */
            ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
                         dd->ipath_sendctrl);

      /* and again, be sure all have hit the chip */
      ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
}


static void ipath_set_ib_lstate(struct ipath_devdata *dd, int which)
{
      static const char *what[4] = {
            [0] = "DOWN",
            [INFINIPATH_IBCC_LINKCMD_INIT] = "INIT",
            [INFINIPATH_IBCC_LINKCMD_ARMED] = "ARMED",
            [INFINIPATH_IBCC_LINKCMD_ACTIVE] = "ACTIVE"
      };
      int linkcmd = (which >> INFINIPATH_IBCC_LINKCMD_SHIFT) &
                  INFINIPATH_IBCC_LINKCMD_MASK;

      ipath_cdbg(VERBOSE, "Trying to move unit %u to %s, current ltstate "
               "is %s\n", dd->ipath_unit,
               what[linkcmd],
               ipath_ibcstatus_str[
                     (ipath_read_kreg64
                      (dd, dd->ipath_kregs->kr_ibcstatus) >>
                      INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) &
                     INFINIPATH_IBCS_LINKTRAININGSTATE_MASK]);
      /* flush all queued sends when going to DOWN or INIT, to be sure that
       * they don't block MAD packets */
      if (!linkcmd || linkcmd == INFINIPATH_IBCC_LINKCMD_INIT)
            ipath_cancel_sends(dd, 1);

      ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl,
                   dd->ipath_ibcctrl | which);
}

int ipath_set_linkstate(struct ipath_devdata *dd, u8 newstate)
{
      u32 lstate;
      int ret;

      switch (newstate) {
      case IPATH_IB_LINKDOWN:
            ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKINITCMD_POLL <<
                            INFINIPATH_IBCC_LINKINITCMD_SHIFT);
            /* don't wait */
            ret = 0;
            goto bail;

      case IPATH_IB_LINKDOWN_SLEEP:
            ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKINITCMD_SLEEP <<
                            INFINIPATH_IBCC_LINKINITCMD_SHIFT);
            /* don't wait */
            ret = 0;
            goto bail;

      case IPATH_IB_LINKDOWN_DISABLE:
            ipath_set_ib_lstate(dd,
                            INFINIPATH_IBCC_LINKINITCMD_DISABLE <<
                            INFINIPATH_IBCC_LINKINITCMD_SHIFT);
            /* don't wait */
            ret = 0;
            goto bail;

      case IPATH_IB_LINKINIT:
            if (dd->ipath_flags & IPATH_LINKINIT) {
                  ret = 0;
                  goto bail;
            }
            ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKCMD_INIT <<
                            INFINIPATH_IBCC_LINKCMD_SHIFT);
            lstate = IPATH_LINKINIT;
            break;

      case IPATH_IB_LINKARM:
            if (dd->ipath_flags & IPATH_LINKARMED) {
                  ret = 0;
                  goto bail;
            }
            if (!(dd->ipath_flags &
                  (IPATH_LINKINIT | IPATH_LINKACTIVE))) {
                  ret = -EINVAL;
                  goto bail;
            }
            ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKCMD_ARMED <<
                            INFINIPATH_IBCC_LINKCMD_SHIFT);
            /*
             * Since the port can transition to ACTIVE by receiving
             * a non VL 15 packet, wait for either state.
             */
            lstate = IPATH_LINKARMED | IPATH_LINKACTIVE;
            break;

      case IPATH_IB_LINKACTIVE:
            if (dd->ipath_flags & IPATH_LINKACTIVE) {
                  ret = 0;
                  goto bail;
            }
            if (!(dd->ipath_flags & IPATH_LINKARMED)) {
                  ret = -EINVAL;
                  goto bail;
            }
            ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKCMD_ACTIVE <<
                            INFINIPATH_IBCC_LINKCMD_SHIFT);
            lstate = IPATH_LINKACTIVE;
            break;

      case IPATH_IB_LINK_LOOPBACK:
            dev_info(&dd->pcidev->dev, "Enabling IB local loopback\n");
            dd->ipath_ibcctrl |= INFINIPATH_IBCC_LOOPBACK;
            ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl,
                         dd->ipath_ibcctrl);
            ret = 0;
            goto bail; // no state change to wait for

      case IPATH_IB_LINK_EXTERNAL:
            dev_info(&dd->pcidev->dev, "Disabling IB local loopback (normal)\n");
            dd->ipath_ibcctrl &= ~INFINIPATH_IBCC_LOOPBACK;
            ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl,
                         dd->ipath_ibcctrl);
            ret = 0;
            goto bail; // no state change to wait for

      default:
            ipath_dbg("Invalid linkstate 0x%x requested\n", newstate);
            ret = -EINVAL;
            goto bail;
      }
      ret = ipath_wait_linkstate(dd, lstate, 2000);

bail:
      return ret;
}

/**
 * ipath_set_mtu - set the MTU
 * @dd: the infinipath device
 * @arg: the new MTU
 *
 * we can handle "any" incoming size, the issue here is whether we
 * need to restrict our outgoing size.   For now, we don't do any
 * sanity checking on this, and we don't deal with what happens to
 * programs that are already running when the size changes.
 * NOTE: changing the MTU will usually cause the IBC to go back to
 * link initialize (IPATH_IBSTATE_INIT) state...
 */
int ipath_set_mtu(struct ipath_devdata *dd, u16 arg)
{
      u32 piosize;
      int changed = 0;
      int ret;

      /*
       * mtu is IB data payload max.  It's the largest power of 2 less
       * than piosize (or even larger, since it only really controls the
       * largest we can receive; we can send the max of the mtu and
       * piosize).  We check that it's one of the valid IB sizes.
       */
      if (arg != 256 && arg != 512 && arg != 1024 && arg != 2048 &&
          arg != 4096) {
            ipath_dbg("Trying to set invalid mtu %u, failing\n", arg);
            ret = -EINVAL;
            goto bail;
      }
      if (dd->ipath_ibmtu == arg) {
            ret = 0;        /* same as current */
            goto bail;
      }

      piosize = dd->ipath_ibmaxlen;
      dd->ipath_ibmtu = arg;

      if (arg >= (piosize - IPATH_PIO_MAXIBHDR)) {
            /* Only if it's not the initial value (or reset to it) */
            if (piosize != dd->ipath_init_ibmaxlen) {
                  dd->ipath_ibmaxlen = piosize;
                  changed = 1;
            }
      } else if ((arg + IPATH_PIO_MAXIBHDR) != dd->ipath_ibmaxlen) {
            piosize = arg + IPATH_PIO_MAXIBHDR;
            ipath_cdbg(VERBOSE, "ibmaxlen was 0x%x, setting to 0x%x "
                     "(mtu 0x%x)\n", dd->ipath_ibmaxlen, piosize,
                     arg);
            dd->ipath_ibmaxlen = piosize;
            changed = 1;
      }

      if (changed) {
            /*
             * set the IBC maxpktlength to the size of our pio
             * buffers in words
             */
            u64 ibc = dd->ipath_ibcctrl;
            ibc &= ~(INFINIPATH_IBCC_MAXPKTLEN_MASK <<
                   INFINIPATH_IBCC_MAXPKTLEN_SHIFT);

            piosize = piosize - 2 * sizeof(u32);    /* ignore pbc */
            dd->ipath_ibmaxlen = piosize;
            piosize /= sizeof(u32); /* in words */
            /*
             * for ICRC, which we only send in diag test pkt mode, and
             * we don't need to worry about that for mtu
             */
            piosize += 1;

            ibc |= piosize << INFINIPATH_IBCC_MAXPKTLEN_SHIFT;
            dd->ipath_ibcctrl = ibc;
            ipath_write_kreg(dd, dd->ipath_kregs->kr_ibcctrl,
                         dd->ipath_ibcctrl);
            dd->ipath_f_tidtemplate(dd);
      }

      ret = 0;

bail:
      return ret;
}

int ipath_set_lid(struct ipath_devdata *dd, u32 arg, u8 lmc)
{
      dd->ipath_lid = arg;
      dd->ipath_lmc = lmc;

      return 0;
}


/**
 * ipath_write_kreg_port - write a device's per-port 64-bit kernel register
 * @dd: the infinipath device
 * @regno: the register number to write
 * @port: the port containing the register
 * @value: the value to write
 *
 * Registers that vary with the chip implementation constants (port)
 * use this routine.
 */
void ipath_write_kreg_port(const struct ipath_devdata *dd, ipath_kreg regno,
                    unsigned port, u64 value)
{
      u16 where;

      if (port < dd->ipath_portcnt &&
          (regno == dd->ipath_kregs->kr_rcvhdraddr ||
           regno == dd->ipath_kregs->kr_rcvhdrtailaddr))
            where = regno + port;
      else
            where = -1;

      ipath_write_kreg(dd, where, value);
}

/*
 * Following deal with the "obviously simple" task of overriding the state
 * of the LEDS, which normally indicate link physical and logical status.
 * The complications arise in dealing with different hardware mappings
 * and the board-dependent routine being called from interrupts.
 * and then there's the requirement to _flash_ them.
 */
#define LED_OVER_FREQ_SHIFT 8
#define LED_OVER_FREQ_MASK (0xFF<<LED_OVER_FREQ_SHIFT)
/* Below is "non-zero" to force override, but both actual LEDs are off */
#define LED_OVER_BOTH_OFF (8)

static void ipath_run_led_override(unsigned long opaque)
{
      struct ipath_devdata *dd = (struct ipath_devdata *)opaque;
      int timeoff;
      int pidx;
      u64 lstate, ltstate, val;

      if (!(dd->ipath_flags & IPATH_INITTED))
            return;

      pidx = dd->ipath_led_override_phase++ & 1;
      dd->ipath_led_override = dd->ipath_led_override_vals[pidx];
      timeoff = dd->ipath_led_override_timeoff;

      /*
       * below potentially restores the LED values per current status,
       * should also possibly setup the traffic-blink register,
       * but leave that to per-chip functions.
       */
      val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus);
      ltstate = (val >> INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) &
              INFINIPATH_IBCS_LINKTRAININGSTATE_MASK;
      lstate = (val >> INFINIPATH_IBCS_LINKSTATE_SHIFT) &
             INFINIPATH_IBCS_LINKSTATE_MASK;

      dd->ipath_f_setextled(dd, lstate, ltstate);
      mod_timer(&dd->ipath_led_override_timer, jiffies + timeoff);
}

void ipath_set_led_override(struct ipath_devdata *dd, unsigned int val)
{
      int timeoff, freq;

      if (!(dd->ipath_flags & IPATH_INITTED))
            return;

      /* First check if we are blinking. If not, use 1HZ polling */
      timeoff = HZ;
      freq = (val & LED_OVER_FREQ_MASK) >> LED_OVER_FREQ_SHIFT;

      if (freq) {
            /* For blink, set each phase from one nybble of val */
            dd->ipath_led_override_vals[0] = val & 0xF;
            dd->ipath_led_override_vals[1] = (val >> 4) & 0xF;
            timeoff = (HZ << 4)/freq;
      } else {
            /* Non-blink set both phases the same. */
            dd->ipath_led_override_vals[0] = val & 0xF;
            dd->ipath_led_override_vals[1] = val & 0xF;
      }
      dd->ipath_led_override_timeoff = timeoff;

      /*
       * If the timer has not already been started, do so. Use a "quick"
       * timeout so the function will be called soon, to look at our request.
       */
      if (atomic_inc_return(&dd->ipath_led_override_timer_active) == 1) {
            /* Need to start timer */
            init_timer(&dd->ipath_led_override_timer);
            dd->ipath_led_override_timer.function =
                                     ipath_run_led_override;
            dd->ipath_led_override_timer.data = (unsigned long) dd;
            dd->ipath_led_override_timer.expires = jiffies + 1;
            add_timer(&dd->ipath_led_override_timer);
      } else {
            atomic_dec(&dd->ipath_led_override_timer_active);
      }
}

/**
 * ipath_shutdown_device - shut down a device
 * @dd: the infinipath device
 *
 * This is called to make the device quiet when we are about to
 * unload the driver, and also when the device is administratively
 * disabled.   It does not free any data structures.
 * Everything it does has to be setup again by ipath_init_chip(dd,1)
 */
void ipath_shutdown_device(struct ipath_devdata *dd)
{
      ipath_dbg("Shutting down the device\n");

      dd->ipath_flags |= IPATH_LINKUNK;
      dd->ipath_flags &= ~(IPATH_INITTED | IPATH_LINKDOWN |
                       IPATH_LINKINIT | IPATH_LINKARMED |
                       IPATH_LINKACTIVE);
      *dd->ipath_statusp &= ~(IPATH_STATUS_IB_CONF |
                        IPATH_STATUS_IB_READY);

      /* mask interrupts, but not errors */
      ipath_write_kreg(dd, dd->ipath_kregs->kr_intmask, 0ULL);

      dd->ipath_rcvctrl = 0;
      ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
                   dd->ipath_rcvctrl);

      /*
       * gracefully stop all sends allowing any in progress to trickle out
       * first.
       */
      ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl, 0ULL);
      /* flush it */
      ipath_read_kreg64(dd, dd->ipath_kregs->kr_scratch);
      /*
       * enough for anything that's going to trickle out to have actually
       * done so.
       */
      udelay(5);

      ipath_set_ib_lstate(dd, INFINIPATH_IBCC_LINKINITCMD_DISABLE <<
                      INFINIPATH_IBCC_LINKINITCMD_SHIFT);
      ipath_cancel_sends(dd, 0);

      signal_ib_event(dd, IB_EVENT_PORT_ERR);

      /* disable IBC */
      dd->ipath_control &= ~INFINIPATH_C_LINKENABLE;
      ipath_write_kreg(dd, dd->ipath_kregs->kr_control,
                   dd->ipath_control | INFINIPATH_C_FREEZEMODE);

      /*
       * clear SerdesEnable and turn the leds off; do this here because
       * we are unloading, so don't count on interrupts to move along
       * Turn the LEDs off explictly for the same reason.
       */
      dd->ipath_f_quiet_serdes(dd);

      if (dd->ipath_stats_timer_active) {
            del_timer_sync(&dd->ipath_stats_timer);
            dd->ipath_stats_timer_active = 0;
      }

      /*
       * clear all interrupts and errors, so that the next time the driver
       * is loaded or device is enabled, we know that whatever is set
       * happened while we were unloaded
       */
      ipath_write_kreg(dd, dd->ipath_kregs->kr_hwerrclear,
                   ~0ULL & ~INFINIPATH_HWE_MEMBISTFAILED);
      ipath_write_kreg(dd, dd->ipath_kregs->kr_errorclear, -1LL);
      ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, -1LL);

      ipath_cdbg(VERBOSE, "Flush time and errors to EEPROM\n");
      ipath_update_eeprom_log(dd);
}

/**
 * ipath_free_pddata - free a port's allocated data
 * @dd: the infinipath device
 * @pd: the portdata structure
 *
 * free up any allocated data for a port
 * This should not touch anything that would affect a simultaneous
 * re-allocation of port data, because it is called after ipath_mutex
 * is released (and can be called from reinit as well).
 * It should never change any chip state, or global driver state.
 * (The only exception to global state is freeing the port0 port0_skbs.)
 */
void ipath_free_pddata(struct ipath_devdata *dd, struct ipath_portdata *pd)
{
      if (!pd)
            return;

      if (pd->port_rcvhdrq) {
            ipath_cdbg(VERBOSE, "free closed port %d rcvhdrq @ %p "
                     "(size=%lu)\n", pd->port_port, pd->port_rcvhdrq,
                     (unsigned long) pd->port_rcvhdrq_size);
            dma_free_coherent(&dd->pcidev->dev, pd->port_rcvhdrq_size,
                          pd->port_rcvhdrq, pd->port_rcvhdrq_phys);
            pd->port_rcvhdrq = NULL;
            if (pd->port_rcvhdrtail_kvaddr) {
                  dma_free_coherent(&dd->pcidev->dev, PAGE_SIZE,
                               pd->port_rcvhdrtail_kvaddr,
                               pd->port_rcvhdrqtailaddr_phys);
                  pd->port_rcvhdrtail_kvaddr = NULL;
            }
      }
      if (pd->port_port && pd->port_rcvegrbuf) {
            unsigned e;

            for (e = 0; e < pd->port_rcvegrbuf_chunks; e++) {
                  void *base = pd->port_rcvegrbuf[e];
                  size_t size = pd->port_rcvegrbuf_size;

                  ipath_cdbg(VERBOSE, "egrbuf free(%p, %lu), "
                           "chunk %u/%u\n", base,
                           (unsigned long) size,
                           e, pd->port_rcvegrbuf_chunks);
                  dma_free_coherent(&dd->pcidev->dev, size,
                        base, pd->port_rcvegrbuf_phys[e]);
            }
            kfree(pd->port_rcvegrbuf);
            pd->port_rcvegrbuf = NULL;
            kfree(pd->port_rcvegrbuf_phys);
            pd->port_rcvegrbuf_phys = NULL;
            pd->port_rcvegrbuf_chunks = 0;
      } else if (pd->port_port == 0 && dd->ipath_port0_skbinfo) {
            unsigned e;
            struct ipath_skbinfo *skbinfo = dd->ipath_port0_skbinfo;

            dd->ipath_port0_skbinfo = NULL;
            ipath_cdbg(VERBOSE, "free closed port %d "
                     "ipath_port0_skbinfo @ %p\n", pd->port_port,
                     skbinfo);
            for (e = 0; e < dd->ipath_rcvegrcnt; e++)
            if (skbinfo[e].skb) {
                  pci_unmap_single(dd->pcidev, skbinfo[e].phys,
                               dd->ipath_ibmaxlen,
                               PCI_DMA_FROMDEVICE);
                  dev_kfree_skb(skbinfo[e].skb);
            }
            vfree(skbinfo);
      }
      kfree(pd->port_tid_pg_list);
      vfree(pd->subport_uregbase);
      vfree(pd->subport_rcvegrbuf);
      vfree(pd->subport_rcvhdr_base);
      kfree(pd);
}

static int __init infinipath_init(void)
{
      int ret;

      if (ipath_debug & __IPATH_DBG)
            printk(KERN_INFO DRIVER_LOAD_MSG "%s", ib_ipath_version);

      /*
       * These must be called before the driver is registered with
       * the PCI subsystem.
       */
      idr_init(&unit_table);
      if (!idr_pre_get(&unit_table, GFP_KERNEL)) {
            ret = -ENOMEM;
            goto bail;
      }

      ret = pci_register_driver(&ipath_driver);
      if (ret < 0) {
            printk(KERN_ERR IPATH_DRV_NAME
                   ": Unable to register driver: error %d\n", -ret);
            goto bail_unit;
      }

      ret = ipath_driver_create_group(&ipath_driver.driver);
      if (ret < 0) {
            printk(KERN_ERR IPATH_DRV_NAME ": Unable to create driver "
                   "sysfs entries: error %d\n", -ret);
            goto bail_pci;
      }

      ret = ipath_init_ipathfs();
      if (ret < 0) {
            printk(KERN_ERR IPATH_DRV_NAME ": Unable to create "
                   "ipathfs: error %d\n", -ret);
            goto bail_group;
      }

      goto bail;

bail_group:
      ipath_driver_remove_group(&ipath_driver.driver);

bail_pci:
      pci_unregister_driver(&ipath_driver);

bail_unit:
      idr_destroy(&unit_table);

bail:
      return ret;
}

static void __exit infinipath_cleanup(void)
{
      ipath_exit_ipathfs();

      ipath_driver_remove_group(&ipath_driver.driver);

      ipath_cdbg(VERBOSE, "Unregistering pci driver\n");
      pci_unregister_driver(&ipath_driver);

      idr_destroy(&unit_table);
}

/**
 * ipath_reset_device - reset the chip if possible
 * @unit: the device to reset
 *
 * Whether or not reset is successful, we attempt to re-initialize the chip
 * (that is, much like a driver unload/reload).  We clear the INITTED flag
 * so that the various entry points will fail until we reinitialize.  For
 * now, we only allow this if no user ports are open that use chip resources
 */
int ipath_reset_device(int unit)
{
      int ret, i;
      struct ipath_devdata *dd = ipath_lookup(unit);

      if (!dd) {
            ret = -ENODEV;
            goto bail;
      }

      if (atomic_read(&dd->ipath_led_override_timer_active)) {
            /* Need to stop LED timer, _then_ shut off LEDs */
            del_timer_sync(&dd->ipath_led_override_timer);
            atomic_set(&dd->ipath_led_override_timer_active, 0);
      }

      /* Shut off LEDs after we are sure timer is not running */
      dd->ipath_led_override = LED_OVER_BOTH_OFF;
      dd->ipath_f_setextled(dd, 0, 0);

      dev_info(&dd->pcidev->dev, "Reset on unit %u requested\n", unit);

      if (!dd->ipath_kregbase || !(dd->ipath_flags & IPATH_PRESENT)) {
            dev_info(&dd->pcidev->dev, "Invalid unit number %u or "
                   "not initialized or not present\n", unit);
            ret = -ENXIO;
            goto bail;
      }

      if (dd->ipath_pd)
            for (i = 1; i < dd->ipath_cfgports; i++) {
                  if (dd->ipath_pd[i] && dd->ipath_pd[i]->port_cnt) {
                        ipath_dbg("unit %u port %d is in use "
                                "(PID %u cmd %s), can't reset\n",
                                unit, i,
                                dd->ipath_pd[i]->port_pid,
                                dd->ipath_pd[i]->port_comm);
                        ret = -EBUSY;
                        goto bail;
                  }
            }

      dd->ipath_flags &= ~IPATH_INITTED;
      ret = dd->ipath_f_reset(dd);
      if (ret != 1)
            ipath_dbg("reset was not successful\n");
      ipath_dbg("Trying to reinitialize unit %u after reset attempt\n",
              unit);
      ret = ipath_init_chip(dd, 1);
      if (ret)
            ipath_dev_err(dd, "Reinitialize unit %u after "
                        "reset failed with %d\n", unit, ret);
      else
            dev_info(&dd->pcidev->dev, "Reinitialized unit %u after "
                   "resetting\n", unit);

bail:
      return ret;
}

int ipath_set_rx_pol_inv(struct ipath_devdata *dd, u8 new_pol_inv)
{
      u64 val;
      if ( new_pol_inv > INFINIPATH_XGXS_RX_POL_MASK ) {
            return -1;
      }
      if ( dd->ipath_rx_pol_inv != new_pol_inv ) {
            dd->ipath_rx_pol_inv = new_pol_inv;
            val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig);
            val &= ~(INFINIPATH_XGXS_RX_POL_MASK <<
                   INFINIPATH_XGXS_RX_POL_SHIFT);
            val |= ((u64)dd->ipath_rx_pol_inv) <<
                  INFINIPATH_XGXS_RX_POL_SHIFT;
            ipath_write_kreg(dd, dd->ipath_kregs->kr_xgxsconfig, val);
      }
      return 0;
}
module_init(infinipath_init);
module_exit(infinipath_cleanup);

Generated by  Doxygen 1.6.0   Back to index