Logo Search packages:      
Sourcecode: linux version File versions  Download package

tda1004x.h

  /*
     Driver for Philips tda1004xh OFDM Frontend

     (c) 2004 Andrew de Quincey

     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
     the Free Software Foundation; either version 2 of the License, or
     (at your option) any later version.

     This program is distributed in the hope that it will be useful,
     but WITHOUT ANY WARRANTY; without even the implied warranty of
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

     GNU General Public License for more details.

     You should have received a copy of the GNU General Public License
     along with this program; if not, write to the Free Software
     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.

   */

#ifndef TDA1004X_H
#define TDA1004X_H

#include <linux/dvb/frontend.h>
#include <linux/firmware.h>

enum tda10046_xtal {
      TDA10046_XTAL_4M,
      TDA10046_XTAL_16M,
};

enum tda10046_agc {
      TDA10046_AGC_DEFAULT,         /* original configuration */
      TDA10046_AGC_IFO_AUTO_NEG,    /* IF AGC only, automatic, negtive */
      TDA10046_AGC_IFO_AUTO_POS,    /* IF AGC only, automatic, positive */
      TDA10046_AGC_TDA827X,         /* IF AGC only, special setup for tda827x */
};

/* Many (hybrid) boards use GPIO 1 and 3
      GPIO1 analog - dvb switch
      GPIO3 firmware eeprom address switch
*/
enum tda10046_gpio {
      TDA10046_GPTRI  = 0x00,       /* All GPIOs tristate */
      TDA10046_GP00   = 0x40,       /* GPIO3=0, GPIO1=0 */
      TDA10046_GP01   = 0x42,       /* GPIO3=0, GPIO1=1 */
      TDA10046_GP10   = 0x48,       /* GPIO3=1, GPIO1=0 */
      TDA10046_GP11   = 0x4a,       /* GPIO3=1, GPIO1=1 */
      TDA10046_GP00_I = 0x80,       /* GPIO3=0, GPIO1=0, invert in sleep mode*/
      TDA10046_GP01_I = 0x82,       /* GPIO3=0, GPIO1=1, invert in sleep mode */
      TDA10046_GP10_I = 0x88,       /* GPIO3=1, GPIO1=0, invert in sleep mode */
      TDA10046_GP11_I = 0x8a,       /* GPIO3=1, GPIO1=1, invert in sleep mode */
};

enum tda10046_if {
      TDA10046_FREQ_3617,           /* original config, 36,166 MHZ */
      TDA10046_FREQ_3613,           /* 36,13 MHZ */
      TDA10046_FREQ_045,            /* low IF, 4.0, 4.5, or 5.0 MHZ */
      TDA10046_FREQ_052,            /* low IF, 5.1667 MHZ for tda9889 */
};

enum tda10046_tsout {
      TDA10046_TS_PARALLEL  = 0x00, /* parallel transport stream, default */
      TDA10046_TS_SERIAL    = 0x01, /* serial transport stream */
};

struct tda1004x_config
{
      /* the demodulator's i2c address */
      u8 demod_address;

      /* does the "inversion" need inverted? */
      u8 invert;

      /* Does the OCLK signal need inverted? */
      u8 invert_oclk;

      /* parallel or serial transport stream */
      enum tda10046_tsout ts_mode;

      /* Xtal frequency, 4 or 16MHz*/
      enum tda10046_xtal xtal_freq;

      /* IF frequency */
      enum tda10046_if if_freq;

      /* AGC configuration */
      enum tda10046_agc agc_config;

      /* setting of GPIO1 and 3 */
      enum tda10046_gpio gpio_config;

      /* slave address and configuration of the tuner */
      u8 tuner_address;
      u8 tuner_config;
      u8 antenna_switch;

      /* if the board uses another I2c Bridge (tda8290), its address */
      u8 i2c_gate;

      /* request firmware for device */
      int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name);
};

enum tda1004x_demod {
      TDA1004X_DEMOD_TDA10045,
      TDA1004X_DEMOD_TDA10046,
};

struct tda1004x_state {
      struct i2c_adapter* i2c;
      const struct tda1004x_config* config;
      struct dvb_frontend frontend;

      /* private demod data */
      enum tda1004x_demod demod_type;
};

#if defined(CONFIG_DVB_TDA1004X) || (defined(CONFIG_DVB_TDA1004X_MODULE) && defined(MODULE))
extern struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config,
                                  struct i2c_adapter* i2c);

extern struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config,
                                  struct i2c_adapter* i2c);
#else
static inline struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config,
                                  struct i2c_adapter* i2c)
{
      printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
      return NULL;
}
static inline struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config,
                                  struct i2c_adapter* i2c)
{
      printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __FUNCTION__);
      return NULL;
}
#endif // CONFIG_DVB_TDA1004X

static inline int tda1004x_writereg(struct dvb_frontend *fe, u8 reg, u8 val) {
      int r = 0;
      u8 buf[] = {reg, val};
      if (fe->ops.write)
            r = fe->ops.write(fe, buf, 2);
      return r;
}

#endif // TDA1004X_H

Generated by  Doxygen 1.6.0   Back to index