Logo Search packages:      
Sourcecode: linux version File versions  Download package

setup.c

/*
 *    Machine specific setup for generic
 */

#include <linux/smp.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <asm/acpi.h>
#include <asm/arch_hooks.h>
#include <asm/e820.h>
#include <asm/setup.h>

#ifdef CONFIG_HOTPLUG_CPU
#define DEFAULT_SEND_IPI      (1)
#else
#define DEFAULT_SEND_IPI      (0)
#endif

int no_broadcast=DEFAULT_SEND_IPI;

/**
 * pre_intr_init_hook - initialisation prior to setting up interrupt vectors
 *
 * Description:
 *    Perform any necessary interrupt initialisation prior to setting up
 *    the "ordinary" interrupt call gates.  For legacy reasons, the ISA
 *    interrupts should be initialised here if the machine emulates a PC
 *    in any way.
 **/
void __init pre_intr_init_hook(void)
{
      init_ISA_irqs();
}

/*
 * IRQ2 is cascade interrupt to second interrupt controller
 */
static struct irqaction irq2 = {
      .handler = no_action,
      .mask = CPU_MASK_NONE,
      .name = "cascade",
};

/**
 * intr_init_hook - post gate setup interrupt initialisation
 *
 * Description:
 *    Fill in any interrupts that may have been left out by the general
 *    init_IRQ() routine.  interrupts having to do with the machine rather
 *    than the devices on the I/O bus (like APIC interrupts in intel MP
 *    systems) are started here.
 **/
void __init intr_init_hook(void)
{
#ifdef CONFIG_X86_LOCAL_APIC
      apic_intr_init();
#endif

      if (!acpi_ioapic)
            setup_irq(2, &irq2);
}

/**
 * pre_setup_arch_hook - hook called prior to any setup_arch() execution
 *
 * Description:
 *    generally used to activate any machine specific identification
 *    routines that may be needed before setup_arch() runs.  On VISWS
 *    this is used to get the board revision and type.
 **/
void __init pre_setup_arch_hook(void)
{
}

/**
 * trap_init_hook - initialise system specific traps
 *
 * Description:
 *    Called as the final act of trap_init().  Used in VISWS to initialise
 *    the various board specific APIC traps.
 **/
void __init trap_init_hook(void)
{
}

static struct irqaction irq0  = {
      .handler = timer_interrupt,
      .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_IRQPOLL,
      .mask = CPU_MASK_NONE,
      .name = "timer"
};

/**
 * time_init_hook - do any specific initialisations for the system timer.
 *
 * Description:
 *    Must plug the system timer interrupt source at HZ into the IRQ listed
 *    in irq_vectors.h:TIMER_IRQ
 **/
void __init time_init_hook(void)
{
      irq0.mask = cpumask_of_cpu(0);
      setup_irq(0, &irq0);
}

#ifdef CONFIG_MCA
/**
 * mca_nmi_hook - hook into MCA specific NMI chain
 *
 * Description:
 *    The MCA (Microchannel Architecture) has an NMI chain for NMI sources
 *    along the MCA bus.  Use this to hook into that chain if you will need
 *    it.
 **/
void mca_nmi_hook(void)
{
      /* If I recall correctly, there's a whole bunch of other things that
       * we can do to check for NMI problems, but that's all I know about
       * at the moment.
       */

      printk("NMI generated from unknown source!\n");
}
#endif

static __init int no_ipi_broadcast(char *str)
{
      get_option(&str, &no_broadcast);
      printk ("Using %s mode\n", no_broadcast ? "No IPI Broadcast" :
                                                                  "IPI Broadcast");
      return 1;
}

__setup("no_ipi_broadcast=", no_ipi_broadcast);

static int __init print_ipi_mode(void)
{
      printk ("Using IPI %s mode\n", no_broadcast ? "No-Shortcut" :
                                                                  "Shortcut");
      return 0;
}

late_initcall(print_ipi_mode);

/**
 * machine_specific_memory_setup - Hook for machine specific memory setup.
 *
 * Description:
 *    This is included late in kernel/setup.c so that it can make
 *    use of all of the static functions.
 **/

char * __init machine_specific_memory_setup(void)
{
      char *who;


      who = "BIOS-e820";

      /*
       * Try to copy the BIOS-supplied E820-map.
       *
       * Otherwise fake a memory map; one section from 0k->640k,
       * the next section from 1mb->appropriate_mem_k
       */
      sanitize_e820_map(boot_params.e820_map, &boot_params.e820_entries);
      if (copy_e820_map(boot_params.e820_map, boot_params.e820_entries)
          < 0) {
            unsigned long mem_size;

            /* compare results from other methods and take the greater */
            if (boot_params.alt_mem_k
                < boot_params.screen_info.ext_mem_k) {
                  mem_size = boot_params.screen_info.ext_mem_k;
                  who = "BIOS-88";
            } else {
                  mem_size = boot_params.alt_mem_k;
                  who = "BIOS-e801";
            }

            e820.nr_map = 0;
            add_memory_region(0, LOWMEMSIZE(), E820_RAM);
            add_memory_region(HIGH_MEMORY, mem_size << 10, E820_RAM);
      }
      return who;
}

Generated by  Doxygen 1.6.0   Back to index