Logo Search packages:      
Sourcecode: linux version File versions

mach-vr1000.c

/* linux/arch/arm/mach-s3c2410/mach-vr1000.c
 *
 * Copyright (c) 2003-2005,2008 Simtec Electronics
 *   Ben Dooks <ben@simtec.co.uk>
 *
 * Machine support for Thorcom VR1000 board. Designed for Thorcom by
 * Simtec Electronics, http://www.simtec.co.uk/
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
*/

#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/dm9000.h>
#include <linux/i2c.h>

#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/serial_8250.h>
#include <linux/serial_reg.h>

#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>

#include <mach/bast-map.h>
#include <mach/vr1000-map.h>
#include <mach/vr1000-irq.h>
#include <mach/vr1000-cpld.h>

#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>

#include <asm/plat-s3c/regs-serial.h>
#include <mach/regs-gpio.h>
#include <mach/leds-gpio.h>

#include <asm/plat-s3c24xx/clock.h>
#include <asm/plat-s3c24xx/devs.h>
#include <asm/plat-s3c24xx/cpu.h>

#include "usb-simtec.h"
#include "nor-simtec.h"

/* macros for virtual address mods for the io space entries */
#define VA_C5(item) ((unsigned long)(item) + BAST_VAM_CS5)
#define VA_C4(item) ((unsigned long)(item) + BAST_VAM_CS4)
#define VA_C3(item) ((unsigned long)(item) + BAST_VAM_CS3)
#define VA_C2(item) ((unsigned long)(item) + BAST_VAM_CS2)

/* macros to modify the physical addresses for io space */

#define PA_CS2(item) (__phys_to_pfn((item) + S3C2410_CS2))
#define PA_CS3(item) (__phys_to_pfn((item) + S3C2410_CS3))
#define PA_CS4(item) (__phys_to_pfn((item) + S3C2410_CS4))
#define PA_CS5(item) (__phys_to_pfn((item) + S3C2410_CS5))

static struct map_desc vr1000_iodesc[] __initdata = {
  /* ISA IO areas */
  {
        .virtual  = (u32)S3C24XX_VA_ISA_BYTE,
        .pfn            = PA_CS2(BAST_PA_ISAIO),
        .length   = SZ_16M,
        .type           = MT_DEVICE,
  }, {
        .virtual  = (u32)S3C24XX_VA_ISA_WORD,
        .pfn            = PA_CS3(BAST_PA_ISAIO),
        .length   = SZ_16M,
        .type           = MT_DEVICE,
  },

  /*  CPLD control registers, and external interrupt controls */
  {
        .virtual  = (u32)VR1000_VA_CTRL1,
        .pfn            = __phys_to_pfn(VR1000_PA_CTRL1),
        .length   = SZ_1M,
        .type           = MT_DEVICE,
  }, {
        .virtual  = (u32)VR1000_VA_CTRL2,
        .pfn            = __phys_to_pfn(VR1000_PA_CTRL2),
        .length   = SZ_1M,
        .type           = MT_DEVICE,
  }, {
        .virtual  = (u32)VR1000_VA_CTRL3,
        .pfn            = __phys_to_pfn(VR1000_PA_CTRL3),
        .length   = SZ_1M,
        .type           = MT_DEVICE,
  }, {
        .virtual  = (u32)VR1000_VA_CTRL4,
        .pfn            = __phys_to_pfn(VR1000_PA_CTRL4),
        .length   = SZ_1M,
        .type           = MT_DEVICE,
  },
};

#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE

/* uart clock source(s) */

static struct s3c24xx_uart_clksrc vr1000_serial_clocks[] = {
      [0] = {
            .name       = "uclk",
            .divisor    = 1,
            .min_baud   = 0,
            .max_baud   = 0,
      },
      [1] = {
            .name       = "pclk",
            .divisor    = 1,
            .min_baud   = 0,
            .max_baud   = 0.
      }
};

static struct s3c2410_uartcfg vr1000_uartcfgs[] __initdata = {
      [0] = {
            .hwport          = 0,
            .flags           = 0,
            .ucon      = UCON,
            .ulcon           = ULCON,
            .ufcon           = UFCON,
            .clocks          = vr1000_serial_clocks,
            .clocks_size = ARRAY_SIZE(vr1000_serial_clocks),
      },
      [1] = {
            .hwport          = 1,
            .flags           = 0,
            .ucon      = UCON,
            .ulcon           = ULCON,
            .ufcon           = UFCON,
            .clocks          = vr1000_serial_clocks,
            .clocks_size = ARRAY_SIZE(vr1000_serial_clocks),
      },
      /* port 2 is not actually used */
      [2] = {
            .hwport          = 2,
            .flags           = 0,
            .ucon      = UCON,
            .ulcon           = ULCON,
            .ufcon           = UFCON,
            .clocks          = vr1000_serial_clocks,
            .clocks_size = ARRAY_SIZE(vr1000_serial_clocks),

      }
};

/* definitions for the vr1000 extra 16550 serial ports */

#define VR1000_BAUDBASE (3692307)

#define VR1000_SERIAL_MAPBASE(x) (VR1000_PA_SERIAL + 0x80 + ((x) << 5))

static struct plat_serial8250_port serial_platform_data[] = {
      [0] = {
            .mapbase    = VR1000_SERIAL_MAPBASE(0),
            .irq        = IRQ_VR1000_SERIAL + 0,
            .flags            = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
            .iotype           = UPIO_MEM,
            .regshift   = 0,
            .uartclk    = VR1000_BAUDBASE,
      },
      [1] = {
            .mapbase    = VR1000_SERIAL_MAPBASE(1),
            .irq        = IRQ_VR1000_SERIAL + 1,
            .flags            = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
            .iotype           = UPIO_MEM,
            .regshift   = 0,
            .uartclk    = VR1000_BAUDBASE,
      },
      [2] = {
            .mapbase    = VR1000_SERIAL_MAPBASE(2),
            .irq        = IRQ_VR1000_SERIAL + 2,
            .flags            = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
            .iotype           = UPIO_MEM,
            .regshift   = 0,
            .uartclk    = VR1000_BAUDBASE,
      },
      [3] = {
            .mapbase    = VR1000_SERIAL_MAPBASE(3),
            .irq        = IRQ_VR1000_SERIAL + 3,
            .flags            = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
            .iotype           = UPIO_MEM,
            .regshift   = 0,
            .uartclk    = VR1000_BAUDBASE,
      },
      { },
};

static struct platform_device serial_device = {
      .name             = "serial8250",
      .id               = PLAT8250_DEV_PLATFORM,
      .dev              = {
            .platform_data    = serial_platform_data,
      },
};

/* DM9000 ethernet devices */

static struct resource vr1000_dm9k0_resource[] = {
      [0] = {
            .start = S3C2410_CS5 + VR1000_PA_DM9000,
            .end   = S3C2410_CS5 + VR1000_PA_DM9000 + 3,
            .flags = IORESOURCE_MEM
      },
      [1] = {
            .start = S3C2410_CS5 + VR1000_PA_DM9000 + 0x40,
            .end   = S3C2410_CS5 + VR1000_PA_DM9000 + 0x7f,
            .flags = IORESOURCE_MEM
      },
      [2] = {
            .start = IRQ_VR1000_DM9000A,
            .end   = IRQ_VR1000_DM9000A,
            .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
      }

};

static struct resource vr1000_dm9k1_resource[] = {
      [0] = {
            .start = S3C2410_CS5 + VR1000_PA_DM9000 + 0x80,
            .end   = S3C2410_CS5 + VR1000_PA_DM9000 + 0x83,
            .flags = IORESOURCE_MEM
      },
      [1] = {
            .start = S3C2410_CS5 + VR1000_PA_DM9000 + 0xC0,
            .end   = S3C2410_CS5 + VR1000_PA_DM9000 + 0xFF,
            .flags = IORESOURCE_MEM
      },
      [2] = {
            .start = IRQ_VR1000_DM9000N,
            .end   = IRQ_VR1000_DM9000N,
            .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
      }
};

/* for the moment we limit ourselves to 16bit IO until some
 * better IO routines can be written and tested
*/

static struct dm9000_plat_data vr1000_dm9k_platdata = {
      .flags            = DM9000_PLATF_16BITONLY,
};

static struct platform_device vr1000_dm9k0 = {
      .name       = "dm9000",
      .id         = 0,
      .num_resources    = ARRAY_SIZE(vr1000_dm9k0_resource),
      .resource   = vr1000_dm9k0_resource,
      .dev        = {
            .platform_data = &vr1000_dm9k_platdata,
      }
};

static struct platform_device vr1000_dm9k1 = {
      .name       = "dm9000",
      .id         = 1,
      .num_resources    = ARRAY_SIZE(vr1000_dm9k1_resource),
      .resource   = vr1000_dm9k1_resource,
      .dev        = {
            .platform_data = &vr1000_dm9k_platdata,
      }
};

/* LEDS */

static struct s3c24xx_led_platdata vr1000_led1_pdata = {
      .name       = "led1",
      .gpio       = S3C2410_GPB0,
      .def_trigger      = "",
};

static struct s3c24xx_led_platdata vr1000_led2_pdata = {
      .name       = "led2",
      .gpio       = S3C2410_GPB1,
      .def_trigger      = "",
};

static struct s3c24xx_led_platdata vr1000_led3_pdata = {
      .name       = "led3",
      .gpio       = S3C2410_GPB2,
      .def_trigger      = "",
};

static struct platform_device vr1000_led1 = {
      .name       = "s3c24xx_led",
      .id         = 1,
      .dev        = {
            .platform_data    = &vr1000_led1_pdata,
      },
};

static struct platform_device vr1000_led2 = {
      .name       = "s3c24xx_led",
      .id         = 2,
      .dev        = {
            .platform_data    = &vr1000_led2_pdata,
      },
};

static struct platform_device vr1000_led3 = {
      .name       = "s3c24xx_led",
      .id         = 3,
      .dev        = {
            .platform_data    = &vr1000_led3_pdata,
      },
};

/* I2C devices. */

static struct i2c_board_info vr1000_i2c_devs[] __initdata = {
      {
            I2C_BOARD_INFO("tlv320aic23", 0x1a),
      }, {
            I2C_BOARD_INFO("tmp101", 0x48),
      }, {
            I2C_BOARD_INFO("m41st87", 0x68),
      },
};

/* devices for this board */

static struct platform_device *vr1000_devices[] __initdata = {
      &s3c_device_usb,
      &s3c_device_lcd,
      &s3c_device_wdt,
      &s3c_device_i2c,
      &s3c_device_adc,
      &serial_device,
      &vr1000_dm9k0,
      &vr1000_dm9k1,
      &vr1000_led1,
      &vr1000_led2,
      &vr1000_led3,
};

static struct clk *vr1000_clocks[] __initdata = {
      &s3c24xx_dclk0,
      &s3c24xx_dclk1,
      &s3c24xx_clkout0,
      &s3c24xx_clkout1,
      &s3c24xx_uclk,
};

static void vr1000_power_off(void)
{
      s3c2410_gpio_cfgpin(S3C2410_GPB9, S3C2410_GPB9_OUTP);
      s3c2410_gpio_setpin(S3C2410_GPB9, 1);
}

static void __init vr1000_map_io(void)
{
      /* initialise clock sources */

      s3c24xx_dclk0.parent = &clk_upll;
      s3c24xx_dclk0.rate   = 12*1000*1000;

      s3c24xx_dclk1.parent = NULL;
      s3c24xx_dclk1.rate   = 3692307;

      s3c24xx_clkout0.parent  = &s3c24xx_dclk0;
      s3c24xx_clkout1.parent  = &s3c24xx_dclk1;

      s3c24xx_uclk.parent  = &s3c24xx_clkout1;

      s3c24xx_register_clocks(vr1000_clocks, ARRAY_SIZE(vr1000_clocks));

      pm_power_off = vr1000_power_off;

      s3c24xx_init_io(vr1000_iodesc, ARRAY_SIZE(vr1000_iodesc));
      s3c24xx_init_clocks(0);
      s3c24xx_init_uarts(vr1000_uartcfgs, ARRAY_SIZE(vr1000_uartcfgs));
}

static void __init vr1000_init(void)
{
      platform_add_devices(vr1000_devices, ARRAY_SIZE(vr1000_devices));

      i2c_register_board_info(0, vr1000_i2c_devs,
                        ARRAY_SIZE(vr1000_i2c_devs));

      nor_simtec_init();
}

MACHINE_START(VR1000, "Thorcom-VR1000")
      /* Maintainer: Ben Dooks <ben@simtec.co.uk> */
      .phys_io    = S3C2410_PA_UART,
      .io_pg_offst      = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
      .boot_params      = S3C2410_SDRAM_PA + 0x100,
      .map_io           = vr1000_map_io,
      .init_machine     = vr1000_init,
      .init_irq   = s3c24xx_init_irq,
      .timer            = &s3c24xx_timer,
MACHINE_END

Generated by  Doxygen 1.6.0   Back to index