Logo Search packages:      
Sourcecode: linux version File versions


#ifdef __KERNEL__

#include <linux/irq.h>
#include <linux/sysdev.h>
#include <asm/dcr.h>

 * Global registers

#define MPIC_GREG_BASE              0x01000

#define MPIC_GREG_FEATURE_0         0x00000
#define           MPIC_GREG_FEATURE_LAST_SRC_MASK           0x07ff0000
#define           MPIC_GREG_FEATURE_LAST_SRC_SHIFT    16
#define           MPIC_GREG_FEATURE_LAST_CPU_MASK           0x00001f00
#define           MPIC_GREG_FEATURE_LAST_CPU_SHIFT    8
#define           MPIC_GREG_FEATURE_VERSION_MASK            0xff
#define MPIC_GREG_FEATURE_1         0x00010
#define MPIC_GREG_GLOBAL_CONF_0           0x00020
#define           MPIC_GREG_GCONF_RESET               0x80000000
#define           MPIC_GREG_GCONF_8259_PTHROU_DIS           0x20000000
#define           MPIC_GREG_GCONF_NO_BIAS             0x10000000
#define           MPIC_GREG_GCONF_BASE_MASK           0x000fffff
#define           MPIC_GREG_GCONF_MCK                 0x08000000
#define MPIC_GREG_GLOBAL_CONF_1           0x00030
#define           MPIC_GREG_GLOBAL_CONF_1_SIE         0x08000000
#define           MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO_MASK    0x70000000
#define           MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO(r)      \
                  (((r) << 28) & MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO_MASK)
#define MPIC_GREG_VENDOR_0          0x00040
#define MPIC_GREG_VENDOR_1          0x00050
#define MPIC_GREG_VENDOR_2          0x00060
#define MPIC_GREG_VENDOR_3          0x00070
#define MPIC_GREG_VENDOR_ID         0x00080
#define     MPIC_GREG_VENDOR_ID_STEPPING_MASK   0x00ff0000
#define     MPIC_GREG_VENDOR_ID_DEVICE_ID_MASK  0x0000ff00
#define     MPIC_GREG_VENDOR_ID_VENDOR_ID_MASK  0x000000ff
#define MPIC_GREG_PROCESSOR_INIT    0x00090
#define MPIC_GREG_IPI_VECTOR_PRI_0  0x000a0
#define MPIC_GREG_IPI_VECTOR_PRI_1  0x000b0
#define MPIC_GREG_IPI_VECTOR_PRI_2  0x000c0
#define MPIC_GREG_IPI_VECTOR_PRI_3  0x000d0
#define MPIC_GREG_IPI_STRIDE        0x10
#define MPIC_GREG_SPURIOUS          0x000e0
#define MPIC_GREG_TIMER_FREQ        0x000f0

 * Timer registers
#define MPIC_TIMER_BASE             0x01100
#define MPIC_TIMER_STRIDE           0x40

#define MPIC_TIMER_CURRENT_CNT            0x00000
#define MPIC_TIMER_BASE_CNT         0x00010
#define MPIC_TIMER_VECTOR_PRI       0x00020
#define MPIC_TIMER_DESTINATION            0x00030

 * Per-Processor registers

#define MPIC_CPU_THISBASE           0x00000
#define MPIC_CPU_BASE               0x20000
#define MPIC_CPU_STRIDE             0x01000

#define MPIC_CPU_IPI_DISPATCH_0           0x00040
#define MPIC_CPU_IPI_DISPATCH_1           0x00050
#define MPIC_CPU_IPI_DISPATCH_2           0x00060
#define MPIC_CPU_IPI_DISPATCH_3           0x00070
#define MPIC_CPU_IPI_DISPATCH_STRIDE      0x00010
#define MPIC_CPU_CURRENT_TASK_PRI   0x00080
#define     MPIC_CPU_TASKPRI_MASK               0x0000000f
#define MPIC_CPU_WHOAMI             0x00090
#define     MPIC_CPU_WHOAMI_MASK                0x0000001f
#define MPIC_CPU_INTACK             0x000a0
#define MPIC_CPU_EOI                0x000b0
#define MPIC_CPU_MCACK              0x000c0

 * Per-source registers

#define MPIC_IRQ_BASE               0x10000
#define MPIC_IRQ_STRIDE             0x00020
#define MPIC_IRQ_VECTOR_PRI         0x00000
#define     MPIC_VECPRI_MASK              0x80000000
#define     MPIC_VECPRI_ACTIVITY                0x40000000  /* Read Only */
#define     MPIC_VECPRI_PRIORITY_MASK           0x000f0000
#define     MPIC_VECPRI_PRIORITY_SHIFT          16
#define     MPIC_VECPRI_VECTOR_MASK             0x000007ff
#define     MPIC_VECPRI_POLARITY_POSITIVE       0x00800000
#define     MPIC_VECPRI_POLARITY_NEGATIVE       0x00000000
#define     MPIC_VECPRI_POLARITY_MASK           0x00800000
#define     MPIC_VECPRI_SENSE_LEVEL             0x00400000
#define     MPIC_VECPRI_SENSE_EDGE              0x00000000
#define     MPIC_VECPRI_SENSE_MASK              0x00400000
#define MPIC_IRQ_DESTINATION        0x00010

#define MPIC_MAX_IRQ_SOURCES  2048
#define MPIC_MAX_CPUS         32
#define MPIC_MAX_ISU          32

 * Tsi108 implementation of MPIC has many differences from the original one

 * Global registers

#define TSI108_GREG_BASE            0x00000
#define TSI108_GREG_FEATURE_0       0x00000
#define TSI108_GREG_GLOBAL_CONF_0   0x00004
#define TSI108_GREG_VENDOR_ID       0x0000c
#define TSI108_GREG_IPI_VECTOR_PRI_0      0x00204           /* Doorbell 0 */
#define TSI108_GREG_IPI_STRIDE            0x0c
#define TSI108_GREG_SPURIOUS        0x00010
#define TSI108_GREG_TIMER_FREQ            0x00014

 * Timer registers
#define TSI108_TIMER_BASE           0x0030
#define TSI108_TIMER_STRIDE         0x10
#define TSI108_TIMER_CURRENT_CNT    0x00000
#define TSI108_TIMER_BASE_CNT       0x00004
#define TSI108_TIMER_VECTOR_PRI           0x00008
#define TSI108_TIMER_DESTINATION    0x0000c

 * Per-Processor registers
#define TSI108_CPU_BASE             0x00300
#define TSI108_CPU_STRIDE           0x00040
#define TSI108_CPU_IPI_DISPATCH_0   0x00200
#define TSI108_CPU_IPI_DISPATCH_STRIDE    0x00000
#define TSI108_CPU_CURRENT_TASK_PRI 0x00000
#define TSI108_CPU_WHOAMI           0xffffffff
#define TSI108_CPU_INTACK           0x00004
#define TSI108_CPU_EOI              0x00008
#define TSI108_CPU_MCACK            0x00004 /* Doesn't really exist here */

 * Per-source registers
#define TSI108_IRQ_BASE             0x00100
#define TSI108_IRQ_STRIDE           0x00008
#define TSI108_IRQ_VECTOR_PRI       0x00000
#define TSI108_VECPRI_VECTOR_MASK   0x000000ff
#define TSI108_VECPRI_POLARITY_POSITIVE   0x01000000
#define TSI108_VECPRI_POLARITY_NEGATIVE   0x00000000
#define TSI108_VECPRI_SENSE_LEVEL   0x02000000
#define TSI108_VECPRI_SENSE_EDGE    0x00000000
#define TSI108_VECPRI_POLARITY_MASK 0x01000000
#define TSI108_VECPRI_SENSE_MASK    0x02000000
#define TSI108_IRQ_DESTINATION            0x00004

/* weird mpic register indices and mask bits in the HW info array */
enum {





/* Fixup table entry */
struct mpic_irq_fixup
      u8 __iomem  *base;
      u8 __iomem  *applebase;
      u32         data;
      unsigned int      index;
#endif /* CONFIG_MPIC_U3_HT_IRQS */

enum mpic_reg_type {

struct mpic_reg_bank {
      u32 __iomem *base;
      dcr_host_t  dhost;
#endif /* CONFIG_PPC_DCR */

struct mpic_irq_save {
      u32         vecprio,
      u32         fixup_data;

/* The instance data of a given MPIC */
struct mpic
      /* The remapper for this MPIC */
      struct irq_host         *irqhost;

      /* The "linux" controller struct */
      struct irq_chip         hc_irq;
      struct irq_chip         hc_ht_irq;
      struct irq_chip         hc_ipi;
      const char        *name;
      /* Flags */
      unsigned int            flags;
      /* How many irq sources in a given ISU */
      unsigned int            isu_size;
      unsigned int            isu_shift;
      unsigned int            isu_mask;
      unsigned int            irq_count;
      /* Number of sources */
      unsigned int            num_sources;
      /* Number of CPUs */
      unsigned int            num_cpus;
      /* default senses array */
      unsigned char           *senses;
      unsigned int            senses_count;

      /* vector numbers used for internal sources (ipi/timers) */
      unsigned int            ipi_vecs[4];
      unsigned int            timer_vecs[4];

      /* Spurious vector to program into unused sources */
      unsigned int            spurious_vec;

      /* The fixup table */
      struct mpic_irq_fixup   *fixups;
      spinlock_t        fixup_lock;

      /* Register access method */
      enum mpic_reg_type      reg_type;

      /* The various ioremap'ed bases */
      struct mpic_reg_bank    gregs;
      struct mpic_reg_bank    tmregs;
      struct mpic_reg_bank    cpuregs[MPIC_MAX_CPUS];
      struct mpic_reg_bank    isus[MPIC_MAX_ISU];

      /* Protected sources */
      unsigned long           *protected;

      /* Pointer to HW info array */
      u32               *hw_set;

      spinlock_t        bitmap_lock;
      unsigned long           *hwirq_bitmap;

      u32               isu_reg0_shadow[MPIC_MAX_IRQ_SOURCES];

      /* link */
      struct mpic       *next;

      struct sys_device sysdev;

#ifdef CONFIG_PM
      struct mpic_irq_save    *save_data;

 * MPIC flags (passed to mpic_alloc)
 * The top 4 bits contain an MPIC bhw id that is used to index the
 * register offsets and some masks when CONFIG_MPIC_WEIRD is set.
 * Note setting any ID (leaving those bits to 0) means standard MPIC

/* This is the primary controller, only that one has IPIs and
 * has afinity control. A non-primary MPIC always uses CPU0
 * registers only
#define MPIC_PRIMARY                0x00000001

/* Set this for a big-endian MPIC */
#define MPIC_BIG_ENDIAN             0x00000002
/* Broken U3 MPIC */
#define MPIC_U3_HT_IRQS             0x00000004
/* Broken IPI registers (autodetected) */
#define MPIC_BROKEN_IPI             0x00000008
/* MPIC wants a reset */
#define MPIC_WANTS_RESET            0x00000010
/* Spurious vector requires EOI */
#define MPIC_SPV_EOI                0x00000020
/* No passthrough disable */
#define MPIC_NO_PTHROU_DIS          0x00000040
/* DCR based MPIC */
#define MPIC_USES_DCR               0x00000080
/* MPIC has 11-bit vector fields (or larger) */
#define MPIC_LARGE_VECTORS          0x00000100
/* Enable delivery of prio 15 interrupts as MCK instead of EE */
#define MPIC_ENABLE_MCK             0x00000200
/* Disable bias among target selection, spread interrupts evenly */
#define MPIC_NO_BIAS                0x00000400
/* Ignore NIRQS as reported by FRR */
#define MPIC_BROKEN_FRR_NIRQS       0x00000800

/* MPIC HW modification ID */
#define MPIC_REGSET_MASK            0xf0000000
#define MPIC_REGSET(val)            (((val) & 0xf ) << 28)
#define MPIC_GET_REGSET(flags)            (((flags) >> 28) & 0xf)

#define     MPIC_REGSET_STANDARD          MPIC_REGSET(0)    /* Original MPIC */
#define     MPIC_REGSET_TSI108            MPIC_REGSET(1)    /* Tsi108/109 PIC */

/* Allocate the controller structure and setup the linux irq descs
 * for the range if interrupts passed in. No HW initialization is
 * actually performed.
 * @phys_addr:    physial base address of the MPIC
 * @flags:  flags, see constants above
 * @isu_size:     number of interrupts in an ISU. Use 0 to use a
 *              standard ISU-less setup (aka powermac)
 * @irq_offset: first irq number to assign to this mpic
 * @irq_count:  number of irqs to use with this mpic IRQ sources. Pass 0
 *            to match the number of sources
 * @ipi_offset: first irq number to assign to this mpic IPI sources,
 *          used only on primary mpic
 * @senses: array of sense values
 * @senses_num: number of entries in the array
 * Note about the sense array. If none is passed, all interrupts are
 * setup to be level negative unless MPIC_U3_HT_IRQS is set in which
 * case they are edge positive (and the array is ignored anyway).
 * The values in the array start at the first source of the MPIC,
 * that is senses[0] correspond to linux irq "irq_offset".
extern struct mpic *mpic_alloc(struct device_node *node,
                         phys_addr_t phys_addr,
                         unsigned int flags,
                         unsigned int isu_size,
                         unsigned int irq_count,
                         const char *name);

/* Assign ISUs, to call before mpic_init()
 * @mpic:   controller structure as returned by mpic_alloc()
 * @isu_num:      ISU number
 * @phys_addr:    physical address of the ISU
extern void mpic_assign_isu(struct mpic *mpic, unsigned int isu_num,
                      phys_addr_t phys_addr);

/* Set default sense codes
 * @mpic:   controller
 * @senses: array of sense codes
 * @count:  size of above array
 * Optionally provide an array (indexed on hardware interrupt numbers
 * for this MPIC) of default sense codes for the chip. Those are linux
 * sense codes IRQ_TYPE_*
 * The driver gets ownership of the pointer, don't dispose of it or
 * anything like that. __init only.
extern void mpic_set_default_senses(struct mpic *mpic, u8 *senses, int count);

/* Initialize the controller. After this has been called, none of the above
 * should be called again for this mpic
extern void mpic_init(struct mpic *mpic);

 * All of the following functions must only be used after the
 * ISUs have been assigned and the controller fully initialized
 * with mpic_init()

/* Change the priority of an interrupt. Default is 8 for irqs and
 * 10 for IPIs. You can call this on both IPIs and IRQ numbers, but the
 * IPI number is then the offset'ed (linux irq number mapped to the IPI)
extern void mpic_irq_set_priority(unsigned int irq, unsigned int pri);

/* Setup a non-boot CPU */
extern void mpic_setup_this_cpu(void);

/* Clean up for kexec (or cpu offline or ...) */
extern void mpic_teardown_this_cpu(int secondary);

/* Get the current cpu priority for this cpu (0..15) */
extern int mpic_cpu_get_priority(void);

/* Set the current cpu priority for this cpu */
extern void mpic_cpu_set_priority(int prio);

/* Request IPIs on primary mpic */
extern void mpic_request_ipis(void);

/* Send an IPI (non offseted number 0..3) */
extern void mpic_send_ipi(unsigned int ipi_no, unsigned int cpu_mask);

/* Send a message (IPI) to a given target (cpu number or MSG_*) */
void smp_mpic_message_pass(int target, int msg);

/* Unmask a specific virq */
extern void mpic_unmask_irq(unsigned int irq);
/* Mask a specific virq */
extern void mpic_mask_irq(unsigned int irq);
/* EOI a specific virq */
extern void mpic_end_irq(unsigned int irq);

/* Fetch interrupt from a given mpic */
extern unsigned int mpic_get_one_irq(struct mpic *mpic);
/* This one gets from the primary mpic */
extern unsigned int mpic_get_irq(void);
/* Fetch Machine Check interrupt from primary mpic */
extern unsigned int mpic_get_mcirq(void);

/* Set the EPIC clock ratio */
void mpic_set_clk_ratio(struct mpic *mpic, u32 clock_ratio);

/* Enable/Disable EPIC serial interrupt mode */
void mpic_set_serial_int(struct mpic *mpic, int enable);

#endif /* __KERNEL__ */
#endif      /* _ASM_POWERPC_MPIC_H */

Generated by  Doxygen 1.6.0   Back to index