Logo Search packages:      
Sourcecode: linux version File versions

mpc5200_simple.c

/*
 * Support for 'mpc5200-simple-platform' compatible boards.
 *
 * Written by Marian Balakowicz <m8@semihalf.com>
 * Copyright (C) 2007 Semihalf
 *
 * This program is free software; you can redistribute  it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 *
 * Description:
 * This code implements support for a simple MPC52xx based boards which
 * do not need a custom platform specific setup. Such boards are
 * supported assuming the following:
 *
 * - GPIO pins are configured by the firmware,
 * - CDM configuration (clocking) is setup correctly by firmware,
 * - if the 'fsl,has-wdt' property is present in one of the
 *   gpt nodes, then it is safe to use such gpt to reset the board,
 * - PCI is supported if enabled in the kernel configuration
 *   and if there is a PCI bus node defined in the device tree.
 *
 * Boards that are compatible with this generic platform support
 * are listed in a 'board' table.
 */

#undef DEBUG
#include <asm/time.h>
#include <asm/prom.h>
#include <asm/machdep.h>
#include <asm/mpc52xx.h>

/*
 * Setup the architecture
 */
static void __init mpc5200_simple_setup_arch(void)
{
      if (ppc_md.progress)
            ppc_md.progress("mpc5200_simple_setup_arch()", 0);

      /* Map important registers from the internal memory map */
      mpc52xx_map_common_devices();

      /* Some mpc5200 & mpc5200b related configuration */
      mpc5200_setup_xlb_arbiter();

      mpc52xx_setup_pci();
}

/* list of the supported boards */
static char *board[] __initdata = {
      "promess,motionpro",
      "phytec,pcm030",
      "schindler,cm5200",
      "tqc,tqm5200",
      NULL
};

/*
 * Called very early, MMU is off, device-tree isn't unflattened
 */
static int __init mpc5200_simple_probe(void)
{
      unsigned long node = of_get_flat_dt_root();
      int i = 0;

      while (board[i]) {
            if (of_flat_dt_is_compatible(node, board[i]))
                  break;
            i++;
      }
      
      return (board[i] != NULL);
}

define_machine(mpc5200_simple_platform) {
      .name       = "mpc5200-simple-platform",
      .probe            = mpc5200_simple_probe,
      .setup_arch = mpc5200_simple_setup_arch,
      .init       = mpc52xx_declare_of_platform_devices,
      .init_IRQ   = mpc52xx_init_irq,
      .get_irq    = mpc52xx_get_irq,
      .restart    = mpc52xx_restart,
      .calibrate_decr   = generic_calibrate_decr,
};

Generated by  Doxygen 1.6.0   Back to index