Logo Search packages:      
Sourcecode: linux version File versions  Download package

setup.c

/*
 * Copyright 2000, 2007-2008 MontaVista Software Inc.
 * Author: MontaVista Software, Inc. <source@mvista.com
 *
 * Updates to 2.6, Pete Popov, Embedded Alley Solutions, Inc.
 *
 *  This program is free software; you can redistribute  it and/or modify it
 *  under  the terms of  the GNU General  Public License as published by the
 *  Free Software Foundation;  either version 2 of the  License, or (at your
 *  option) any later version.
 *
 *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
 *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
 *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
 *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
 *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
 *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
 *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
 *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 *  You should have received a copy of the  GNU General Public License along
 *  with this program; if not, write  to the Free Software Foundation, Inc.,
 *  675 Mass Ave, Cambridge, MA 02139, USA.
 */

#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/module.h>
#include <linux/pm.h>

#include <asm/mipsregs.h>
#include <asm/reboot.h>
#include <asm/time.h>

#include <au1000.h>
#include <prom.h>

extern void __init board_setup(void);
extern void au1000_restart(char *);
extern void au1000_halt(void);
extern void au1000_power_off(void);
extern void set_cpuspec(void);

void __init plat_mem_setup(void)
{
      struct      cpu_spec *sp;
      char *argptr;
      unsigned long prid, cpufreq, bclk;

      set_cpuspec();
      sp = cur_cpu_spec[0];

      board_setup();  /* board specific setup */

      prid = read_c0_prid();
      if (sp->cpu_pll_wo)
#ifdef CONFIG_SOC_AU1000_FREQUENCY
            cpufreq = CONFIG_SOC_AU1000_FREQUENCY / 1000000;
#else
            cpufreq = 396;
#endif
      else
            cpufreq = (au_readl(SYS_CPUPLL) & 0x3F) * 12;
      printk(KERN_INFO "(PRID %08lx) @ %ld MHz\n", prid, cpufreq);

      if (sp->cpu_bclk) {
            /* Enable BCLK switching */
            bclk = au_readl(SYS_POWERCTRL);
            au_writel(bclk | 0x60, SYS_POWERCTRL);
            printk(KERN_INFO "BCLK switching enabled!\n");
      }

      if (sp->cpu_od)
            /* Various early Au1xx0 errata corrected by this */
            set_c0_config(1 << 19); /* Set Config[OD] */
      else
            /* Clear to obtain best system bus performance */
            clear_c0_config(1 << 19); /* Clear Config[OD] */

      argptr = prom_getcmdline();

#ifdef CONFIG_SERIAL_8250_CONSOLE
      argptr = strstr(argptr, "console=");
      if (argptr == NULL) {
            argptr = prom_getcmdline();
            strcat(argptr, " console=ttyS0,115200");
      }
#endif

#ifdef CONFIG_FB_AU1100
      argptr = strstr(argptr, "video=");
      if (argptr == NULL) {
            argptr = prom_getcmdline();
            /* default panel */
            /*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/
      }
#endif

#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000)
      /* au1000 does not support vra, au1500 and au1100 do */
      strcat(argptr, " au1000_audio=vra");
      argptr = prom_getcmdline();
#endif
      _machine_restart = au1000_restart;
      _machine_halt = au1000_halt;
      pm_power_off = au1000_power_off;

      /* IO/MEM resources. */
      set_io_port_base(0);
      ioport_resource.start = IOPORT_RESOURCE_START;
      ioport_resource.end = IOPORT_RESOURCE_END;
      iomem_resource.start = IOMEM_RESOURCE_START;
      iomem_resource.end = IOMEM_RESOURCE_END;

      while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_E0S);
      au_writel(SYS_CNTRL_E0 | SYS_CNTRL_EN0, SYS_COUNTER_CNTRL);
      au_sync();
      while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T0S);
      au_writel(0, SYS_TOYTRIM);
}

#if defined(CONFIG_64BIT_PHYS_ADDR)
/* This routine should be valid for all Au1x based boards */
phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size)
{
      /* Don't fixup 36-bit addresses */
      if ((phys_addr >> 32) != 0)
            return phys_addr;

#ifdef CONFIG_PCI
      {
            u32 start = (u32)Au1500_PCI_MEM_START;
            u32 end   = (u32)Au1500_PCI_MEM_END;

            /* Check for PCI memory window */
            if (phys_addr >= start && (phys_addr + size - 1) <= end)
                  return (phys_t)
                         ((phys_addr - start) + Au1500_PCI_MEM_START);
      }
#endif

      /*
       * All Au1xx0 SOCs have a PCMCIA controller.
       * We setup our 32-bit pseudo addresses to be equal to the
       * 36-bit addr >> 4, to make it easier to check the address
       * and fix it.
       * The PCMCIA socket 0 physical attribute address is 0xF 4000 0000.
       * The pseudo address we use is 0xF400 0000. Any address over
       * 0xF400 0000 is a PCMCIA pseudo address.
       */
      if ((phys_addr >= 0xF4000000) && (phys_addr < 0xFFFFFFFF))
            return (phys_t)(phys_addr << 4);

      /* default nop */
      return phys_addr;
}
EXPORT_SYMBOL(__fixup_bigphys_addr);
#endif

Generated by  Doxygen 1.6.0   Back to index