Logo Search packages:      
Sourcecode: linux version File versions


 * TI DaVinci GPIO Support
 * Copyright (c) 2006 David Brownell
 * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.

#ifndef     __DAVINCI_GPIO_H
#define     __DAVINCI_GPIO_H

#include <linux/io.h>
#include <mach/hardware.h>

 * basic gpio routines
 * board-specific init should be done by arch/.../.../board-XXX.c (maybe
 * initializing banks together) rather than boot loaders; kexec() won't
 * go through boot loaders.
 * the gpio clock will be turned on when gpios are used, and you may also
 * need to pay attention to PINMUX0 and PINMUX1 to be sure those pins are
 * used as gpios, not with other peripherals.
 * GPIOs are numbered 0..(DAVINCI_N_GPIO-1).  For documentation, and maybe
 * for later updates, code should write GPIO(N) or:
 *  - GPIOV18(N) for 1.8V pins, N in 0..53; same as GPIO(0)..GPIO(53)
 *  - GPIOV33(N) for 3.3V pins, N in 0..17; same as GPIO(54)..GPIO(70)
 * For GPIO IRQs use gpio_to_irq(GPIO(N)) or gpio_to_irq(GPIOV33(N)) etc
 * for now, that's != GPIO(N)
#define     GPIO(X)           (X)         /* 0 <= X <= 70 */
#define     GPIOV18(X)  (X)         /* 1.8V i/o; 0 <= X <= 53 */
#define     GPIOV33(X)  ((X)+54)    /* 3.3V i/o; 0 <= X <= 17 */

struct gpio_controller {
      u32   dir;
      u32   out_data;
      u32   set_data;
      u32   clr_data;
      u32   in_data;
      u32   set_rising;
      u32   clr_rising;
      u32   set_falling;
      u32   clr_falling;
      u32   intstat;

/* The __gpio_to_controller() and __gpio_mask() functions inline to constants
 * with constant parameters; or in outlined code they execute at runtime.
 * You'd access the controller directly when reading or writing more than
 * one gpio value at a time, and to support wired logic where the value
 * being driven by the cpu need not match the value read back.
 * These are NOT part of the cross-platform GPIO interface
static inline struct gpio_controller *__iomem
__gpio_to_controller(unsigned gpio)
      void *__iomem ptr;

      if (gpio < 32)
            ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x10);
      else if (gpio < 64)
            ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x38);
      else if (gpio < DAVINCI_N_GPIO)
            ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x60);
            ptr = NULL;
      return ptr;

static inline u32 __gpio_mask(unsigned gpio)
      return 1 << (gpio % 32);

/* The get/set/clear functions will inline when called with constant
 * parameters, for low-overhead bitbanging.  Illegal constant parameters
 * cause link-time errors.
 * Otherwise, calls with variable parameters use outlined functions.
extern int __error_inval_gpio(void);

extern void __gpio_set(unsigned gpio, int value);
extern int __gpio_get(unsigned gpio);

static inline void gpio_set_value(unsigned gpio, int value)
      if (__builtin_constant_p(value)) {
            struct gpio_controller  *__iomem g;
            u32               mask;

            if (gpio >= DAVINCI_N_GPIO)

            g = __gpio_to_controller(gpio);
            mask = __gpio_mask(gpio);
            if (value)
                  __raw_writel(mask, &g->set_data);
                  __raw_writel(mask, &g->clr_data);

      __gpio_set(gpio, value);

/* Returns zero or nonzero; works for gpios configured as inputs OR
 * as outputs.
 * NOTE: changes in reported values are synchronized to the GPIO clock.
 * This is most easily seen after calling gpio_set_value() and then immediatly
 * gpio_get_value(), where the gpio_get_value() would return the old value
 * until the GPIO clock ticks and the new value gets latched.

static inline int gpio_get_value(unsigned gpio)
      struct gpio_controller *__iomem g;

      if (!__builtin_constant_p(gpio))
            return __gpio_get(gpio);

      if (gpio >= DAVINCI_N_GPIO)
            return __error_inval_gpio();

      g = __gpio_to_controller(gpio);
      return !!(__gpio_mask(gpio) & __raw_readl(&g->in_data));

/* powerup default direction is IN */
extern int gpio_direction_input(unsigned gpio);
extern int gpio_direction_output(unsigned gpio, int value);

#include <asm-generic/gpio.h> /* cansleep wrappers */

extern int gpio_request(unsigned gpio, const char *tag);
extern void gpio_free(unsigned gpio);

static inline int gpio_to_irq(unsigned gpio)
      return DAVINCI_N_AINTC_IRQ + gpio;

static inline int irq_to_gpio(unsigned irq)
      return irq - DAVINCI_N_AINTC_IRQ;

#endif                        /* __DAVINCI_GPIO_H */

Generated by  Doxygen 1.6.0   Back to index