Logo Search packages:      
Sourcecode: linux version File versions  Download package

msp_serial.c

/*
 * The setup file for serial related hardware on PMC-Sierra MSP processors.
 *
 * Copyright 2005 PMC-Sierra, Inc.
 *
 *  This program is free software; you can redistribute  it and/or modify it
 *  under  the terms of  the GNU General  Public License as published by the
 *  Free Software Foundation;  either version 2 of the  License, or (at your
 *  option) any later version.
 *
 *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
 *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
 *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
 *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
 *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
 *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
 *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
 *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 *  You should have received a copy of the  GNU General Public License along
 *  with this program; if not, write  to the Free Software Foundation, Inc.,
 *  675 Mass Ave, Cambridge, MA 02139, USA.
 */

#include <linux/serial.h>
#include <linux/serial_core.h>
#include <linux/serial_reg.h>

#include <asm/bootinfo.h>
#include <asm/io.h>
#include <asm/processor.h>
#include <asm/serial.h>
#include <linux/serial_8250.h>

#include <msp_prom.h>
#include <msp_int.h>
#include <msp_regs.h>

void __init msp_serial_setup(void)
{
      char    *s;
      char    *endp;
      struct uart_port up;
      unsigned int uartclk;

      memset(&up, 0, sizeof(up));

      /* Check if clock was specified in environment */
      s = prom_getenv("uartfreqhz");
      if(!(s && *s && (uartclk = simple_strtoul(s, &endp, 10)) && *endp == 0))
            uartclk = MSP_BASE_BAUD;
      ppfinit("UART clock set to %d\n", uartclk);

      /* Initialize first serial port */
      up.mapbase      = MSP_UART0_BASE;
      up.membase      = ioremap_nocache(up.mapbase, MSP_UART_REG_LEN);
      up.irq          = MSP_INT_UART0;
      up.uartclk      = uartclk;
      up.regshift     = 2;
      up.iotype       = UPIO_DWAPB; /* UPIO_MEM like */
      up.flags        = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
      up.type         = PORT_16550A;
      up.line         = 0;
      up.private_data         = (void*)UART0_STATUS_REG;
      if (early_serial_setup(&up))
            printk(KERN_ERR "Early serial init of port 0 failed\n");

      /* Initialize the second serial port, if one exists */
      switch (mips_machtype) {
            case MACH_MSP4200_EVAL:
            case MACH_MSP4200_GW:
            case MACH_MSP4200_FPGA:
            case MACH_MSP7120_EVAL:
            case MACH_MSP7120_GW:
            case MACH_MSP7120_FPGA:
                  /* Enable UART1 on MSP4200 and MSP7120 */
                  *GPIO_CFG2_REG = 0x00002299;
                  break;

            default:
                  return; /* No second serial port, good-bye. */
      }

      up.mapbase      = MSP_UART1_BASE;
      up.membase      = ioremap_nocache(up.mapbase, MSP_UART_REG_LEN);
      up.irq          = MSP_INT_UART1;
      up.line         = 1;
      up.private_data         = (void*)UART1_STATUS_REG;
      if (early_serial_setup(&up))
            printk(KERN_ERR "Early serial init of port 1 failed\n");
}

Generated by  Doxygen 1.6.0   Back to index