Logo Search packages:      
Sourcecode: linux version File versions


 * MPC8xx Internal Memory Map
 * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
 * The I/O on the MPC860 is comprised of blocks of special registers
 * and the dual port ram for the Communication Processor Module.
 * Within this space are functional units such as the SIU, memory
 * controller, system timers, and other control functions.  It is
 * a combination that I found difficult to separate into logical
 * functional files.....but anyone else is welcome to try.  -- Dan
#ifdef __KERNEL__
#ifndef __IMMAP_8XX__
#define __IMMAP_8XX__

/* System configuration registers.
typedef     struct sys_conf {
      uint  sc_siumcr;
      uint  sc_sypcr;
      uint  sc_swt;
      char  res1[2];
      ushort      sc_swsr;
      uint  sc_sipend;
      uint  sc_simask;
      uint  sc_siel;
      uint  sc_sivec;
      uint  sc_tesr;
      char  res2[0xc];
      uint  sc_sdcr;
      char  res3[0x4c];
} sysconf8xx_t;

/* PCMCIA configuration registers.
typedef struct pcmcia_conf {
      uint  pcmc_pbr0;
      uint  pcmc_por0;
      uint  pcmc_pbr1;
      uint  pcmc_por1;
      uint  pcmc_pbr2;
      uint  pcmc_por2;
      uint  pcmc_pbr3;
      uint  pcmc_por3;
      uint  pcmc_pbr4;
      uint  pcmc_por4;
      uint  pcmc_pbr5;
      uint  pcmc_por5;
      uint  pcmc_pbr6;
      uint  pcmc_por6;
      uint  pcmc_pbr7;
      uint  pcmc_por7;
      char  res1[0x20];
      uint  pcmc_pgcra;
      uint  pcmc_pgcrb;
      uint  pcmc_pscr;
      char  res2[4];
      uint  pcmc_pipr;
      char  res3[4];
      uint  pcmc_per;
      char  res4[4];
} pcmconf8xx_t;

/* Memory controller registers.
typedef struct    mem_ctlr {
      uint  memc_br0;
      uint  memc_or0;
      uint  memc_br1;
      uint  memc_or1;
      uint  memc_br2;
      uint  memc_or2;
      uint  memc_br3;
      uint  memc_or3;
      uint  memc_br4;
      uint  memc_or4;
      uint  memc_br5;
      uint  memc_or5;
      uint  memc_br6;
      uint  memc_or6;
      uint  memc_br7;
      uint  memc_or7;
      char  res1[0x24];
      uint  memc_mar;
      uint  memc_mcr;
      char  res2[4];
      uint  memc_mamr;
      uint  memc_mbmr;
      ushort      memc_mstat;
      ushort      memc_mptpr;
      uint  memc_mdr;
      char  res3[0x80];
} memctl8xx_t;

 * BR - Memory Controler: Base Register                           16-9
#define BR_BA_MSK 0xffff8000  /* Base Address Mask                */
#define BR_AT_MSK 0x00007000  /* Address Type Mask                */
#define BR_PS_MSK 0x00000c00  /* Port Size Mask             */
#define BR_PS_32  0x00000000  /* 32 bit port size                 */
#define BR_PS_16  0x00000800  /* 16 bit port size                 */
#define BR_PS_8         0x00000400  /*  8 bit port size                 */
#define BR_PARE         0x00000200  /* Parity Enable              */
#define BR_WP           0x00000100  /* Write Protect              */
#define BR_MS_MSK 0x000000c0  /* Machine Select Mask              */
#define BR_MS_GPCM      0x00000000  /* G.P.C.M. Machine Select          */
#define BR_MS_UPMA      0x00000080  /* U.P.M.A Machine Select           */
#define BR_MS_UPMB      0x000000c0  /* U.P.M.B Machine Select           */
#define BR_V            0x00000001  /* Bank Valid                       */

 * OR - Memory Controler: Option Register                   16-11
#define OR_AM_MSK 0xffff8000  /* Address Mask Mask                */
#define OR_ATM_MSK      0x00007000  /* Address Type Mask Mask           */
#define OR_CSNT_SAM     0x00000800  /* Chip Select Negation Time/ Start */
                              /* Address Multiplex                */
#define OR_ACS_MSK      0x00000600  /* Address to Chip Select Setup mask      */
#define OR_ACS_DIV1     0x00000000  /* CS is output at the same time    */
#define OR_ACS_DIV4     0x00000400  /* CS is output 1/4 a clock later   */
#define OR_ACS_DIV2     0x00000600  /* CS is output 1/2 a clock later   */
#define OR_G5LA         0x00000400  /* Output #GPL5 on #GPL_A5          */
#define OR_G5LS         0x00000200  /* Drive #GPL high on falling edge of...*/
#define OR_BI           0x00000100  /* Burst inhibit              */
#define OR_SCY_MSK      0x000000f0  /* Cycle Length in Clocks           */
#define OR_SCY_0_CLK    0x00000000  /* 0 clock cycles wait states       */
#define OR_SCY_1_CLK    0x00000010  /* 1 clock cycles wait states       */
#define OR_SCY_2_CLK    0x00000020  /* 2 clock cycles wait states       */
#define OR_SCY_3_CLK    0x00000030  /* 3 clock cycles wait states       */
#define OR_SCY_4_CLK    0x00000040  /* 4 clock cycles wait states       */
#define OR_SCY_5_CLK    0x00000050  /* 5 clock cycles wait states       */
#define OR_SCY_6_CLK    0x00000060  /* 6 clock cycles wait states       */
#define OR_SCY_7_CLK    0x00000070  /* 7 clock cycles wait states       */
#define OR_SCY_8_CLK    0x00000080  /* 8 clock cycles wait states       */
#define OR_SCY_9_CLK    0x00000090  /* 9 clock cycles wait states       */
#define OR_SCY_10_CLK   0x000000a0  /* 10 clock cycles wait states            */
#define OR_SCY_11_CLK   0x000000b0  /* 11 clock cycles wait states            */
#define OR_SCY_12_CLK   0x000000c0  /* 12 clock cycles wait states            */
#define OR_SCY_13_CLK   0x000000d0  /* 13 clock cycles wait states            */
#define OR_SCY_14_CLK   0x000000e0  /* 14 clock cycles wait states            */
#define OR_SCY_15_CLK   0x000000f0  /* 15 clock cycles wait states            */
#define OR_SETA         0x00000008  /* External Transfer Acknowledge    */
#define OR_TRLX         0x00000004  /* Timing Relaxed             */
#define OR_EHTR         0x00000002  /* Extended Hold Time on Read       */

/* System Integration Timers.
typedef struct    sys_int_timers {
      ushort      sit_tbscr;
      char  res0[0x02];
      uint  sit_tbreff0;
      uint  sit_tbreff1;
      char  res1[0x14];
      ushort      sit_rtcsc;
      char  res2[0x02];
      uint  sit_rtc;
      uint  sit_rtsec;
      uint  sit_rtcal;
      char  res3[0x10];
      ushort      sit_piscr;
      char  res4[2];
      uint  sit_pitc;
      uint  sit_pitr;
      char  res5[0x34];
} sit8xx_t;

#define TBSCR_TBIRQ_MASK      ((ushort)0xff00)
#define TBSCR_REFA            ((ushort)0x0080)
#define TBSCR_REFB            ((ushort)0x0040)
#define TBSCR_REFAE           ((ushort)0x0008)
#define TBSCR_REFBE           ((ushort)0x0004)
#define TBSCR_TBF       ((ushort)0x0002)
#define TBSCR_TBE       ((ushort)0x0001)

#define RTCSC_RTCIRQ_MASK     ((ushort)0xff00)
#define RTCSC_SEC       ((ushort)0x0080)
#define RTCSC_ALR       ((ushort)0x0040)
#define RTCSC_38K       ((ushort)0x0010)
#define RTCSC_SIE       ((ushort)0x0008)
#define RTCSC_ALE       ((ushort)0x0004)
#define RTCSC_RTF       ((ushort)0x0002)
#define RTCSC_RTE       ((ushort)0x0001)

#define PISCR_PIRQ_MASK       ((ushort)0xff00)
#define PISCR_PS        ((ushort)0x0080)
#define PISCR_PIE       ((ushort)0x0004)
#define PISCR_PTF       ((ushort)0x0002)
#define PISCR_PTE       ((ushort)0x0001)

/* Clocks and Reset.
typedef struct clk_and_reset {
      uint  car_sccr;
      uint  car_plprcr;
      uint  car_rsr;
      char  res[0x74];        /* Reserved area                  */
} car8xx_t;

/* System Integration Timers keys.
typedef struct sitk {
      uint  sitk_tbscrk;
      uint  sitk_tbreff0k;
      uint  sitk_tbreff1k;
      uint  sitk_tbk;
      char  res1[0x10];
      uint  sitk_rtcsck;
      uint  sitk_rtck;
      uint  sitk_rtseck;
      uint  sitk_rtcalk;
      char  res2[0x10];
      uint  sitk_piscrk;
      uint  sitk_pitck;
      char  res3[0x38];
} sitk8xx_t;

/* Clocks and reset keys.
typedef struct cark {
      uint  cark_sccrk;
      uint  cark_plprcrk;
      uint  cark_rsrk;
      char  res[0x474];
} cark8xx_t;

/* The key to unlock registers maintained by keep-alive power.
#define KAPWR_KEY ((unsigned int)0x55ccaa33)

/* Video interface.  MPC823 Only.
typedef struct vid823 {
      ushort      vid_vccr;
      ushort      res1;
      u_char      vid_vsr;
      u_char      res2;
      u_char      vid_vcmr;
      u_char      res3;
      uint  vid_vbcb;
      uint  res4;
      uint  vid_vfcr0;
      uint  vid_vfaa0;
      uint  vid_vfba0;
      uint  vid_vfcr1;
      uint  vid_vfaa1;
      uint  vid_vfba1;
      u_char      res5[0x18];
} vid823_t;

/* LCD interface.  823 Only.
typedef struct lcd {
      uint  lcd_lccr;
      uint  lcd_lchcr;
      uint  lcd_lcvcr;
      char  res1[4];
      uint  lcd_lcfaa;
      uint  lcd_lcfba;
      char  lcd_lcsr;
      char  res2[0x7];
} lcd823_t;

/* I2C
typedef struct i2c {
      u_char      i2c_i2mod;
      char  res1[3];
      u_char      i2c_i2add;
      char  res2[3];
      u_char      i2c_i2brg;
      char  res3[3];
      u_char      i2c_i2com;
      char  res4[3];
      u_char      i2c_i2cer;
      char  res5[3];
      u_char      i2c_i2cmr;
      char  res6[0x8b];
} i2c8xx_t;

/* DMA control/status registers.
typedef struct sdma_csr {
      char  res1[4];
      uint  sdma_sdar;
      u_char      sdma_sdsr;
      char  res3[3];
      u_char      sdma_sdmr;
      char  res4[3];
      u_char      sdma_idsr1;
      char  res5[3];
      u_char      sdma_idmr1;
      char  res6[3];
      u_char      sdma_idsr2;
      char  res7[3];
      u_char      sdma_idmr2;
      char  res8[0x13];
} sdma8xx_t;

/* Communication Processor Module Interrupt Controller.
typedef struct cpm_ic {
      ushort      cpic_civr;
      char  res[0xe];
      uint  cpic_cicr;
      uint  cpic_cipr;
      uint  cpic_cimr;
      uint  cpic_cisr;
} cpic8xx_t;

/* Input/Output Port control/status registers.
typedef struct io_port {
      ushort      iop_padir;
      ushort      iop_papar;
      ushort      iop_paodr;
      ushort      iop_padat;
      char  res1[8];
      ushort      iop_pcdir;
      ushort      iop_pcpar;
      ushort      iop_pcso;
      ushort      iop_pcdat;
      ushort      iop_pcint;
      char  res2[6];
      ushort      iop_pddir;
      ushort      iop_pdpar;
      char  res3[2];
      ushort      iop_pddat;
      uint  utmode;
      char  res4[4];
} iop8xx_t;

/* Communication Processor Module Timers
typedef struct cpm_timers {
      ushort      cpmt_tgcr;
      char  res1[0xe];
      ushort      cpmt_tmr1;
      ushort      cpmt_tmr2;
      ushort      cpmt_trr1;
      ushort      cpmt_trr2;
      ushort      cpmt_tcr1;
      ushort      cpmt_tcr2;
      ushort      cpmt_tcn1;
      ushort      cpmt_tcn2;
      ushort      cpmt_tmr3;
      ushort      cpmt_tmr4;
      ushort      cpmt_trr3;
      ushort      cpmt_trr4;
      ushort      cpmt_tcr3;
      ushort      cpmt_tcr4;
      ushort      cpmt_tcn3;
      ushort      cpmt_tcn4;
      ushort      cpmt_ter1;
      ushort      cpmt_ter2;
      ushort      cpmt_ter3;
      ushort      cpmt_ter4;
      char  res2[8];
} cpmtimer8xx_t;

/* Finally, the Communication Processor stuff.....
typedef struct scc {          /* Serial communication channels */
      uint  scc_gsmrl;
      uint  scc_gsmrh;
      ushort      scc_psmr;
      char  res1[2];
      ushort      scc_todr;
      ushort      scc_dsr;
      ushort      scc_scce;
      char  res2[2];
      ushort      scc_sccm;
      char  res3;
      u_char      scc_sccs;
      char  res4[8];
} scc_t;

typedef struct smc {          /* Serial management channels */
      char  res1[2];
      ushort      smc_smcmr;
      char  res2[2];
      u_char      smc_smce;
      char  res3[3];
      u_char      smc_smcm;
      char  res4[5];
} smc_t;

/* MPC860T Fast Ethernet Controller.  It isn't part of the CPM, but
 * it fits within the address space.

typedef struct fec {
      uint  fec_addr_low;           /* lower 32 bits of station address */
      ushort      fec_addr_high;          /* upper 16 bits of station address */
      ushort      res1;             /* reserved                   */
      uint  fec_hash_table_high;    /* upper 32-bits of hash table            */
      uint  fec_hash_table_low;     /* lower 32-bits of hash table            */
      uint  fec_r_des_start;  /* beginning of Rx descriptor ring  */
      uint  fec_x_des_start;  /* beginning of Tx descriptor ring  */
      uint  fec_r_buff_size;  /* Rx buffer size             */
      uint  res2[9];          /* reserved                   */
      uint  fec_ecntrl;       /* ethernet control register        */
      uint  fec_ievent;       /* interrupt event register         */
      uint  fec_imask;        /* interrupt mask register          */
      uint  fec_ivec;         /* interrupt level and vector status      */
      uint  fec_r_des_active; /* Rx ring updated flag             */
      uint  fec_x_des_active; /* Tx ring updated flag             */
      uint  res3[10];         /* reserved                   */
      uint  fec_mii_data;           /* MII data register                */
      uint  fec_mii_speed;          /* MII speed control register       */
      uint  res4[17];         /* reserved                   */
      uint  fec_r_bound;            /* end of RAM (read-only)           */
      uint  fec_r_fstart;           /* Rx FIFO start address            */
      uint  res5[6];          /* reserved                   */
      uint  fec_x_fstart;           /* Tx FIFO start address            */
      uint  res6[17];         /* reserved                   */
      uint  fec_fun_code;           /* fec SDMA function code           */
      uint  res7[3];          /* reserved                   */
      uint  fec_r_cntrl;            /* Rx control register              */
      uint  fec_r_hash;       /* Rx hash register                 */
      uint  res8[14];         /* reserved                   */
      uint  fec_x_cntrl;            /* Tx control register              */
      uint  res9[0x1e];       /* reserved                   */
} fec_t;

/* The FEC and LCD color map share the same address space....
 * I guess we will never see an 823T :-).
union fec_lcd {
      fec_t fl_un_fec;
      u_char      fl_un_cmap[0x200];

typedef struct comm_proc {
      /* General control and status registers.
      ushort      cp_cpcr;
      u_char      res1[2];
      ushort      cp_rccr;
      u_char      res2;
      u_char      cp_rmds;
      u_char      res3[4];
      ushort      cp_cpmcr1;
      ushort      cp_cpmcr2;
      ushort      cp_cpmcr3;
      ushort      cp_cpmcr4;
      u_char      res4[2];
      ushort      cp_rter;
      u_char      res5[2];
      ushort      cp_rtmr;
      u_char      res6[0x14];

      /* Baud rate generators.
      uint  cp_brgc1;
      uint  cp_brgc2;
      uint  cp_brgc3;
      uint  cp_brgc4;

      /* Serial Communication Channels.
      scc_t cp_scc[4];

      /* Serial Management Channels.
      smc_t cp_smc[2];

      /* Serial Peripheral Interface.
      ushort      cp_spmode;
      u_char      res7[4];
      u_char      cp_spie;
      u_char      res8[3];
      u_char      cp_spim;
      u_char      res9[2];
      u_char      cp_spcom;
      u_char      res10[2];

      /* Parallel Interface Port.
      u_char      res11[2];
      ushort      cp_pipc;
      u_char      res12[2];
      ushort      cp_ptpr;
      uint  cp_pbdir;
      uint  cp_pbpar;
      u_char      res13[2];
      ushort      cp_pbodr;
      uint  cp_pbdat;

      /* Port E - MPC87x/88x only.
      uint  cp_pedir;
      uint  cp_pepar;
      uint  cp_peso;
      uint  cp_peodr;
      uint  cp_pedat;

      /* Communications Processor Timing Register -
         Contains RMII Timing for the FECs on MPC87x/88x only.
      uint  cp_cptr;

      /* Serial Interface and Time Slot Assignment.
      uint  cp_simode;
      u_char      cp_sigmr;
      u_char      res15;
      u_char      cp_sistr;
      u_char      cp_sicmr;
      u_char      res16[4];
      uint  cp_sicr;
      uint  cp_sirp;
      u_char      res17[0xc];

      /* 256 bytes of MPC823 video controller RAM array.
      u_char      cp_vcram[0x100];
      u_char      cp_siram[0x200];

      /* The fast ethernet controller is not really part of the CPM,
       * but it resides in the address space.
       * The LCD color map is also here.
      union fec_lcd     fl_un;
#define cp_fec          fl_un.fl_un_fec
#define lcd_cmap  fl_un.fl_un_cmap
      char  res18[0xE00];

      /* The DUET family has a second FEC here */
      fec_t cp_fec2;
#define cp_fec1   cp_fec      /* consistency macro */

      /* Dual Ported RAM follows.
       * There are many different formats for this memory area
       * depending upon the devices used and options chosen.
       * Some processors don't have all of it populated.
      u_char      cp_dpmem[0x1C00]; /* BD / Data / ucode */
      u_char      cp_dparam[0x400]; /* Parameter RAM */
} cpm8xx_t;

/* Internal memory map.
typedef struct immap {
      sysconf8xx_t      im_siu_conf;      /* SIU Configuration */
      pcmconf8xx_t      im_pcmcia;  /* PCMCIA Configuration */
      memctl8xx_t im_memctl;  /* Memory Controller */
      sit8xx_t    im_sit;           /* System integration timers */
      car8xx_t    im_clkrst;  /* Clocks and reset */
      sitk8xx_t   im_sitk;    /* Sys int timer keys */
      cark8xx_t   im_clkrstk; /* Clocks and reset keys */
      vid823_t    im_vid;           /* Video (823 only) */
      lcd823_t    im_lcd;           /* LCD (823 only) */
      i2c8xx_t    im_i2c;           /* I2C control/status */
      sdma8xx_t   im_sdma;    /* SDMA control/status */
      cpic8xx_t   im_cpic;    /* CPM Interrupt Controller */
      iop8xx_t    im_ioport;  /* IO Port control/status */
      cpmtimer8xx_t     im_cpmtimer;      /* CPM timers */
      cpm8xx_t    im_cpm;           /* Communication processor */
} immap_t;

#endif /* __IMMAP_8XX__ */
#endif /* __KERNEL__ */

Generated by  Doxygen 1.6.0   Back to index