Logo Search packages:      
Sourcecode: linux version File versions


 * Copyright 2007, Olof Johansson, PA Semi
 * Based on arch/powerpc/sysdev/mpic_u3msi.c:
 * Copyright 2006, Segher Boessenkool, IBM Corporation.
 * Copyright 2006-2007, Michael Ellerman, IBM Corporation.
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; version 2 of the
 * License.

#undef DEBUG

#include <linux/irq.h>
#include <linux/bootmem.h>
#include <linux/msi.h>
#include <asm/mpic.h>
#include <asm/prom.h>
#include <asm/hw_irq.h>
#include <asm/ppc-pci.h>
#include <asm/msi_bitmap.h>

#include "mpic.h"

/* Allocate 16 interrupts per device, to give an alignment of 16,
 * since that's the size of the grouping w.r.t. affinity. If someone
 * needs more than 32 MSI's down the road we'll have to rethink this,
 * but it should be OK for now.
#define ALLOC_CHUNK 16

#define PASEMI_MSI_ADDR 0xfc080000

/* A bit ugly, can we get this from the pci_dev somehow? */
static struct mpic *msi_mpic;

static void mpic_pasemi_msi_mask_irq(unsigned int irq)
      pr_debug("mpic_pasemi_msi_mask_irq %d\n", irq);

static void mpic_pasemi_msi_unmask_irq(unsigned int irq)
      pr_debug("mpic_pasemi_msi_unmask_irq %d\n", irq);

static struct irq_chip mpic_pasemi_msi_chip = {
      .shutdown   = mpic_pasemi_msi_mask_irq,
      .mask       = mpic_pasemi_msi_mask_irq,
      .unmask           = mpic_pasemi_msi_unmask_irq,
      .eoi        = mpic_end_irq,
      .set_type   = mpic_set_irq_type,
      .set_affinity     = mpic_set_affinity,
      .typename   = "PASEMI-MSI ",

static int pasemi_msi_check_device(struct pci_dev *pdev, int nvec, int type)
      if (type == PCI_CAP_ID_MSIX)
            pr_debug("pasemi_msi: MSI-X untested, trying anyway\n");

      return 0;

static void pasemi_msi_teardown_msi_irqs(struct pci_dev *pdev)
      struct msi_desc *entry;

      pr_debug("pasemi_msi_teardown_msi_irqs, pdev %p\n", pdev);

      list_for_each_entry(entry, &pdev->msi_list, list) {
            if (entry->irq == NO_IRQ)

            set_irq_msi(entry->irq, NULL);
                               virq_to_hw(entry->irq), ALLOC_CHUNK);


static int pasemi_msi_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
      unsigned int virq;
      struct msi_desc *entry;
      struct msi_msg msg;
      int hwirq;

      pr_debug("pasemi_msi_setup_msi_irqs, pdev %p nvec %d type %d\n",
             pdev, nvec, type);

      msg.address_hi = 0;
      msg.address_lo = PASEMI_MSI_ADDR;

      list_for_each_entry(entry, &pdev->msi_list, list) {
            /* Allocate 16 interrupts for now, since that's the grouping for
             * affinity. This can be changed later if it turns out 32 is too
             * few MSIs for someone, but restrictions will apply to how the
             * sources can be changed independently.
            hwirq = msi_bitmap_alloc_hwirqs(&msi_mpic->msi_bitmap,
            if (hwirq < 0) {
                  pr_debug("pasemi_msi: failed allocating hwirq\n");
                  return hwirq;

            virq = irq_create_mapping(msi_mpic->irqhost, hwirq);
            if (virq == NO_IRQ) {
                  pr_debug("pasemi_msi: failed mapping hwirq 0x%x\n",
                  msi_bitmap_free_hwirqs(&msi_mpic->msi_bitmap, hwirq,
                  return -ENOSPC;

            /* Vector on MSI is really an offset, the hardware adds
             * it to the value written at the magic address. So set
             * it to 0 to remain sane.
            mpic_set_vector(virq, 0);

            set_irq_msi(virq, entry);
            set_irq_chip(virq, &mpic_pasemi_msi_chip);
            set_irq_type(virq, IRQ_TYPE_EDGE_RISING);

            pr_debug("pasemi_msi: allocated virq 0x%x (hw 0x%x) " \
                   "addr 0x%x\n", virq, hwirq, msg.address_lo);

            /* Likewise, the device writes [0...511] into the target
             * register to generate MSI [512...1023]
            msg.data = hwirq-0x200;
            write_msi_msg(virq, &msg);

      return 0;

int mpic_pasemi_msi_init(struct mpic *mpic)
      int rc;

      if (!mpic->irqhost->of_node ||
            return -ENODEV;

      rc = mpic_msi_init_allocator(mpic);
      if (rc) {
            pr_debug("pasemi_msi: Error allocating bitmap!\n");
            return rc;

      pr_debug("pasemi_msi: Registering PA Semi MPIC MSI callbacks\n");

      msi_mpic = mpic;
      ppc_md.setup_msi_irqs = pasemi_msi_setup_msi_irqs;
      ppc_md.teardown_msi_irqs = pasemi_msi_teardown_msi_irqs;
      ppc_md.msi_check_device = pasemi_msi_check_device;

      return 0;

Generated by  Doxygen 1.6.0   Back to index