Logo Search packages:      
Sourcecode: linux version File versions

irq.c

/*
 * Copyright 2001 MontaVista Software Inc.
 * Author: MontaVista Software, Inc.
 *              ahennessy@mvista.com
 *
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file "COPYING" in the main directory of this archive
 * for more details.
 *
 * Copyright (C) 2000-2001 Toshiba Corporation
 *
 *  This program is free software; you can redistribute  it and/or modify it
 *  under  the terms of  the GNU General  Public License as published by the
 *  Free Software Foundation;  either version 2 of the  License, or (at your
 *  option) any later version.
 *
 *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
 *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
 *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
 *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
 *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
 *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
 *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
 *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 *  You should have received a copy of the  GNU General Public License along
 *  with this program; if not, write  to the Free Software Foundation, Inc.,
 *  675 Mass Ave, Cambridge, MA 02139, USA.
 */
#include <linux/init.h>
#include <linux/types.h>
#include <linux/interrupt.h>

#include <asm/io.h>
#include <asm/mipsregs.h>
#include <asm/txx9/generic.h>
#include <asm/txx9/jmr3927.h>

#if JMR3927_IRQ_END > NR_IRQS
#error JMR3927_IRQ_END > NR_IRQS
#endif

/*
 * CP0_STATUS is a thread's resource (saved/restored on context switch).
 * So disable_irq/enable_irq MUST handle IOC/IRC registers.
 */
static void mask_irq_ioc(unsigned int irq)
{
      /* 0: mask */
      unsigned int irq_nr = irq - JMR3927_IRQ_IOC;
      unsigned char imask = jmr3927_ioc_reg_in(JMR3927_IOC_INTM_ADDR);
      unsigned int bit = 1 << irq_nr;
      jmr3927_ioc_reg_out(imask & ~bit, JMR3927_IOC_INTM_ADDR);
      /* flush write buffer */
      (void)jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR);
}
static void unmask_irq_ioc(unsigned int irq)
{
      /* 0: mask */
      unsigned int irq_nr = irq - JMR3927_IRQ_IOC;
      unsigned char imask = jmr3927_ioc_reg_in(JMR3927_IOC_INTM_ADDR);
      unsigned int bit = 1 << irq_nr;
      jmr3927_ioc_reg_out(imask | bit, JMR3927_IOC_INTM_ADDR);
      /* flush write buffer */
      (void)jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR);
}

static int jmr3927_ioc_irqroute(void)
{
      unsigned char istat = jmr3927_ioc_reg_in(JMR3927_IOC_INTS2_ADDR);
      int i;

      for (i = 0; i < JMR3927_NR_IRQ_IOC; i++) {
            if (istat & (1 << i))
                  return JMR3927_IRQ_IOC + i;
      }
      return -1;
}

static int jmr3927_irq_dispatch(int pending)
{
      int irq;

      if ((pending & CAUSEF_IP7) == 0)
            return -1;
      irq = (pending >> CAUSEB_IP2) & 0x0f;
      irq += JMR3927_IRQ_IRC;
      if (irq == JMR3927_IRQ_IOCINT)
            irq = jmr3927_ioc_irqroute();
      return irq;
}

static struct irq_chip jmr3927_irq_ioc = {
      .name = "jmr3927_ioc",
      .ack = mask_irq_ioc,
      .mask = mask_irq_ioc,
      .mask_ack = mask_irq_ioc,
      .unmask = unmask_irq_ioc,
};

void __init jmr3927_irq_setup(void)
{
      int i;

      txx9_irq_dispatch = jmr3927_irq_dispatch;
      /* Now, interrupt control disabled, */
      /* all IRC interrupts are masked, */
      /* all IRC interrupt mode are Low Active. */

      /* mask all IOC interrupts */
      jmr3927_ioc_reg_out(0, JMR3927_IOC_INTM_ADDR);
      /* setup IOC interrupt mode (SOFT:High Active, Others:Low Active) */
      jmr3927_ioc_reg_out(JMR3927_IOC_INTF_SOFT, JMR3927_IOC_INTP_ADDR);

      /* clear PCI Soft interrupts */
      jmr3927_ioc_reg_out(0, JMR3927_IOC_INTS1_ADDR);
      /* clear PCI Reset interrupts */
      jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);

      tx3927_irq_init();
      for (i = JMR3927_IRQ_IOC; i < JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC; i++)
            set_irq_chip_and_handler(i, &jmr3927_irq_ioc, handle_level_irq);

      /* setup IOC interrupt 1 (PCI, MODEM) */
      set_irq_chained_handler(JMR3927_IRQ_IOCINT, handle_simple_irq);
}

Generated by  Doxygen 1.6.0   Back to index