Logo Search packages:      
Sourcecode: linux version File versions

mpc832x_mds.c

/*
 * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
 *
 * Description:
 * MPC832xE MDS board specific routines.
 *
 * This program is free software; you can redistribute  it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 */

#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/reboot.h>
#include <linux/pci.h>
#include <linux/kdev_t.h>
#include <linux/major.h>
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/initrd.h>
#include <linux/of_platform.h>
#include <linux/of_device.h>

#include <asm/system.h>
#include <asm/atomic.h>
#include <asm/time.h>
#include <asm/io.h>
#include <asm/machdep.h>
#include <asm/ipic.h>
#include <asm/irq.h>
#include <asm/prom.h>
#include <asm/udbg.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
#include <asm/qe.h>
#include <asm/qe_ic.h>

#include "mpc83xx.h"

#undef DEBUG
#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
#else
#define DBG(fmt...)
#endif

static u8 *bcsr_regs = NULL;

/* ************************************************************************
 *
 * Setup the architecture
 *
 */
static void __init mpc832x_sys_setup_arch(void)
{
      struct device_node *np;

      if (ppc_md.progress)
            ppc_md.progress("mpc832x_sys_setup_arch()", 0);

      /* Map BCSR area */
      np = of_find_node_by_name(NULL, "bcsr");
      if (np != 0) {
            struct resource res;

            of_address_to_resource(np, 0, &res);
            bcsr_regs = ioremap(res.start, res.end - res.start +1);
            of_node_put(np);
      }

#ifdef CONFIG_PCI
      for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
            mpc83xx_add_bridge(np);
#endif

#ifdef CONFIG_QUICC_ENGINE
      qe_reset();

      if ((np = of_find_node_by_name(NULL, "par_io")) != NULL) {
            par_io_init(np);
            of_node_put(np);

            for (np = NULL; (np = of_find_node_by_name(np, "ucc")) != NULL;)
                  par_io_of_config(np);
      }

      if ((np = of_find_compatible_node(NULL, "network", "ucc_geth"))
                  != NULL){
            /* Reset the Ethernet PHYs */
#define BCSR8_FETH_RST 0x50
            bcsr_regs[8] &= ~BCSR8_FETH_RST;
            udelay(1000);
            bcsr_regs[8] |= BCSR8_FETH_RST;
            iounmap(bcsr_regs);
            of_node_put(np);
      }
#endif                        /* CONFIG_QUICC_ENGINE */
}

static struct of_device_id mpc832x_ids[] = {
      { .type = "soc", },
      { .compatible = "soc", },
      { .compatible = "simple-bus", },
      { .type = "qe", },
      { .compatible = "fsl,qe", },
      {},
};

static int __init mpc832x_declare_of_platform_devices(void)
{
      /* Publish the QE devices */
      of_platform_bus_probe(NULL, mpc832x_ids, NULL);

      return 0;
}
machine_device_initcall(mpc832x_mds, mpc832x_declare_of_platform_devices);

static void __init mpc832x_sys_init_IRQ(void)
{
      struct device_node *np;

      np = of_find_node_by_type(NULL, "ipic");
      if (!np)
            return;

      ipic_init(np, 0);

      /* Initialize the default interrupt mapping priorities,
       * in case the boot rom changed something on us.
       */
      ipic_set_default_priority();
      of_node_put(np);

#ifdef CONFIG_QUICC_ENGINE
      np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
      if (!np) {
            np = of_find_node_by_type(NULL, "qeic");
            if (!np)
                  return;
      }
      qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
      of_node_put(np);
#endif                        /* CONFIG_QUICC_ENGINE */
}

/*
 * Called very early, MMU is off, device-tree isn't unflattened
 */
static int __init mpc832x_sys_probe(void)
{
        unsigned long root = of_get_flat_dt_root();

        return of_flat_dt_is_compatible(root, "MPC832xMDS");
}

define_machine(mpc832x_mds) {
      .name             = "MPC832x MDS",
      .probe            = mpc832x_sys_probe,
      .setup_arch       = mpc832x_sys_setup_arch,
      .init_IRQ   = mpc832x_sys_init_IRQ,
      .get_irq    = ipic_get_irq,
      .restart    = mpc83xx_restart,
      .time_init  = mpc83xx_time_init,
      .calibrate_decr   = generic_calibrate_decr,
      .progress   = udbg_progress,
};

Generated by  Doxygen 1.6.0   Back to index