Logo Search packages:      
Sourcecode: linux version File versions  Download package

gpio-core.h

/* linux/arch/arm/plat-s3c/include/plat/gpio-core.h
 *
 * Copyright 2008 Simtec Electronics
 *    http://armlinux.simtec.co.uk/
 *    Ben Dooks <ben@simtec.co.uk>
 *
 * S3C Platform - GPIO core
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
*/

/* Define the core gpiolib support functions that the s3c platforms may
 * need to extend or change depending on the hardware and the s3c chip
 * selected at build or found at run time.
 *
 * These definitions are not intended for driver inclusion, there is
 * nothing here that should not live outside the platform and core
 * specific code.
*/

struct s3c_gpio_chip;

/**
 * struct s3c_gpio_pm - power management (suspend/resume) information
 * @save: Routine to save the state of the GPIO block
 * @resume: Routine to resume the GPIO block.
 */
00030 struct s3c_gpio_pm {
      void (*save)(struct s3c_gpio_chip *chip);
      void (*resume)(struct s3c_gpio_chip *chip);
};

struct s3c_gpio_cfg;

/**
 * struct s3c_gpio_chip - wrapper for specific implementation of gpio
 * @chip: The chip structure to be exported via gpiolib.
 * @base: The base pointer to the gpio configuration registers.
 * @config: special function and pull-resistor control information.
 * @pm_save: Save information for suspend/resume support.
 *
 * This wrapper provides the necessary information for the Samsung
 * specific gpios being registered with gpiolib.
 */
00047 struct s3c_gpio_chip {
      struct gpio_chip  chip;
      struct s3c_gpio_cfg     *config;
      struct s3c_gpio_pm      *pm;
      void __iomem            *base;
#ifdef CONFIG_PM
      u32               pm_save[4];
#endif
};

static inline struct s3c_gpio_chip *to_s3c_gpio(struct gpio_chip *gpc)
{
      return container_of(gpc, struct s3c_gpio_chip, chip);
}

/** s3c_gpiolib_add() - add the s3c specific version of a gpio_chip.
 * @chip: The chip to register
 *
 * This is a wrapper to gpiochip_add() that takes our specific gpio chip
 * information and makes the necessary alterations for the platform and
 * notes the information for use with the configuration systems and any
 * other parts of the system.
 */
extern void s3c_gpiolib_add(struct s3c_gpio_chip *chip);

/* CONFIG_S3C_GPIO_TRACK enables the tracking of the s3c specific gpios
 * for use with the configuration calls, and other parts of the s3c gpiolib
 * support code.
 *
 * Not all s3c support code will need this, as some configurations of cpu
 * may only support one or two different configuration options and have an
 * easy gpio to s3c_gpio_chip mapping function. If this is the case, then
 * the machine support file should provide its own s3c_gpiolib_getchip()
 * and any other necessary functions.
 */

#ifdef CONFIG_S3C_GPIO_TRACK
extern struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END];

static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int chip)
{
      return (chip < S3C_GPIO_END) ? s3c_gpios[chip] : NULL;
}
#else
/* machine specific code should provide s3c_gpiolib_getchip */

static inline void s3c_gpiolib_track(struct s3c_gpio_chip *chip) { }
#endif

#ifdef CONFIG_PM
extern struct s3c_gpio_pm s3c_gpio_pm_1bit;
extern struct s3c_gpio_pm s3c_gpio_pm_2bit;
extern struct s3c_gpio_pm s3c_gpio_pm_4bit;
#define __gpio_pm(x) x
#else
#define s3c_gpio_pm_1bit NULL
#define s3c_gpio_pm_2bit NULL
#define s3c_gpio_pm_4bit NULL
#define __gpio_pm(x) NULL

#endif /* CONFIG_PM */

Generated by  Doxygen 1.6.0   Back to index