Logo Search packages:      
Sourcecode: linux version File versions  Download package

core.c

/*
 *  linux/arch/arm/mach-realview/core.c
 *
 *  Copyright (C) 1999 - 2003 ARM Limited
 *  Copyright (C) 2000 Deep Blue Solutions Ltd
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/sysdev.h>
#include <linux/interrupt.h>
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/io.h>
#include <linux/smsc911x.h>
#include <linux/ata_platform.h>
#include <linux/amba/mmci.h>

#include <asm/clkdev.h>
#include <asm/system.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/hardware/arm_timer.h>
#include <asm/hardware/icst307.h>

#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/irq.h>
#include <asm/mach/map.h>

#include <asm/hardware/gic.h>

#include <mach/platform.h>
#include <mach/irqs.h>

#include "core.h"
#include "clock.h"

#define REALVIEW_REFCOUNTER   (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_24MHz_OFFSET)

/* used by entry-macro.S and platsmp.c */
void __iomem *gic_cpu_base_addr;

#ifdef CONFIG_ZONE_DMA
/*
 * Adjust the zones if there are restrictions for DMA access.
 */
void __init realview_adjust_zones(int node, unsigned long *size,
                          unsigned long *hole)
{
      unsigned long dma_size = SZ_256M >> PAGE_SHIFT;

      if (!machine_is_realview_pbx() || node || (size[0] <= dma_size))
            return;

      size[ZONE_NORMAL] = size[0] - dma_size;
      size[ZONE_DMA] = dma_size;
      hole[ZONE_NORMAL] = hole[0];
      hole[ZONE_DMA] = 0;
}
#endif

/*
 * This is the RealView sched_clock implementation.  This has
 * a resolution of 41.7ns, and a maximum value of about 179s.
 */
unsigned long long sched_clock(void)
{
      unsigned long long v;

      v = (unsigned long long)readl(REALVIEW_REFCOUNTER) * 125;
      do_div(v, 3);

      return v;
}


#define REALVIEW_FLASHCTRL    (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_FLASH_OFFSET)

static int realview_flash_init(void)
{
      u32 val;

      val = __raw_readl(REALVIEW_FLASHCTRL);
      val &= ~REALVIEW_FLASHPROG_FLVPPEN;
      __raw_writel(val, REALVIEW_FLASHCTRL);

      return 0;
}

static void realview_flash_exit(void)
{
      u32 val;

      val = __raw_readl(REALVIEW_FLASHCTRL);
      val &= ~REALVIEW_FLASHPROG_FLVPPEN;
      __raw_writel(val, REALVIEW_FLASHCTRL);
}

static void realview_flash_set_vpp(int on)
{
      u32 val;

      val = __raw_readl(REALVIEW_FLASHCTRL);
      if (on)
            val |= REALVIEW_FLASHPROG_FLVPPEN;
      else
            val &= ~REALVIEW_FLASHPROG_FLVPPEN;
      __raw_writel(val, REALVIEW_FLASHCTRL);
}

static struct flash_platform_data realview_flash_data = {
      .map_name         = "cfi_probe",
      .width                  = 4,
      .init             = realview_flash_init,
      .exit             = realview_flash_exit,
      .set_vpp          = realview_flash_set_vpp,
};

struct platform_device realview_flash_device = {
      .name             = "armflash",
      .id               = 0,
      .dev              = {
            .platform_data    = &realview_flash_data,
      },
};

int realview_flash_register(struct resource *res, u32 num)
{
      realview_flash_device.resource = res;
      realview_flash_device.num_resources = num;
      return platform_device_register(&realview_flash_device);
}

static struct smsc911x_platform_config smsc911x_config = {
      .flags            = SMSC911X_USE_32BIT,
      .irq_polarity     = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
      .irq_type   = SMSC911X_IRQ_TYPE_PUSH_PULL,
      .phy_interface    = PHY_INTERFACE_MODE_MII,
};

static struct platform_device realview_eth_device = {
      .name       = "smsc911x",
      .id         = 0,
      .num_resources    = 2,
};

int realview_eth_register(const char *name, struct resource *res)
{
      if (name)
            realview_eth_device.name = name;
      realview_eth_device.resource = res;
      if (strcmp(realview_eth_device.name, "smsc911x") == 0)
            realview_eth_device.dev.platform_data = &smsc911x_config;

      return platform_device_register(&realview_eth_device);
}

struct platform_device realview_usb_device = {
      .name             = "isp1760",
      .num_resources          = 2,
};

int realview_usb_register(struct resource *res)
{
      realview_usb_device.resource = res;
      return platform_device_register(&realview_usb_device);
}

static struct pata_platform_info pata_platform_data = {
      .ioport_shift           = 1,
};

static struct resource pata_resources[] = {
      [0] = {
            .start            = REALVIEW_CF_BASE,
            .end        = REALVIEW_CF_BASE + 0xff,
            .flags            = IORESOURCE_MEM,
      },
      [1] = {
            .start            = REALVIEW_CF_BASE + 0x100,
            .end        = REALVIEW_CF_BASE + SZ_4K - 1,
            .flags            = IORESOURCE_MEM,
      },
};

struct platform_device realview_cf_device = {
      .name             = "pata_platform",
      .id               = -1,
      .num_resources          = ARRAY_SIZE(pata_resources),
      .resource         = pata_resources,
      .dev              = {
            .platform_data    = &pata_platform_data,
      },
};

static struct resource realview_i2c_resource = {
      .start            = REALVIEW_I2C_BASE,
      .end        = REALVIEW_I2C_BASE + SZ_4K - 1,
      .flags            = IORESOURCE_MEM,
};

struct platform_device realview_i2c_device = {
      .name       = "versatile-i2c",
      .id         = 0,
      .num_resources    = 1,
      .resource   = &realview_i2c_resource,
};

static struct i2c_board_info realview_i2c_board_info[] = {
      {
            I2C_BOARD_INFO("ds1338", 0xd0 >> 1),
      },
};

static int __init realview_i2c_init(void)
{
      return i2c_register_board_info(0, realview_i2c_board_info,
                               ARRAY_SIZE(realview_i2c_board_info));
}
arch_initcall(realview_i2c_init);

#define REALVIEW_SYSMCI (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_MCI_OFFSET)

/*
 * This is only used if GPIOLIB support is disabled
 */
static unsigned int realview_mmc_status(struct device *dev)
{
      struct amba_device *adev = container_of(dev, struct amba_device, dev);
      u32 mask;

      if (adev->res.start == REALVIEW_MMCI0_BASE)
            mask = 1;
      else
            mask = 2;

      return readl(REALVIEW_SYSMCI) & mask;
}

struct mmci_platform_data realview_mmc0_plat_data = {
      .ocr_mask   = MMC_VDD_32_33|MMC_VDD_33_34,
      .status           = realview_mmc_status,
      .gpio_wp    = 17,
      .gpio_cd    = 16,
};

struct mmci_platform_data realview_mmc1_plat_data = {
      .ocr_mask   = MMC_VDD_32_33|MMC_VDD_33_34,
      .status           = realview_mmc_status,
      .gpio_wp    = 19,
      .gpio_cd    = 18,
};

/*
 * Clock handling
 */
static const struct icst307_params realview_oscvco_params = {
      .ref        = 24000,
      .vco_max    = 200000,
      .vd_min           = 4 + 8,
      .vd_max           = 511 + 8,
      .rd_min           = 1 + 2,
      .rd_max           = 127 + 2,
};

static void realview_oscvco_set(struct clk *clk, struct icst307_vco vco)
{
      void __iomem *sys_lock = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LOCK_OFFSET;
      void __iomem *sys_osc;
      u32 val;

      if (machine_is_realview_pb1176())
            sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC0_OFFSET;
      else
            sys_osc = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_OSC4_OFFSET;

      val = readl(sys_osc) & ~0x7ffff;
      val |= vco.v | (vco.r << 9) | (vco.s << 16);

      writel(0xa05f, sys_lock);
      writel(val, sys_osc);
      writel(0, sys_lock);
}

static struct clk oscvco_clk = {
      .params     = &realview_oscvco_params,
      .setvco = realview_oscvco_set,
};

/*
 * These are fixed clocks.
 */
static struct clk ref24_clk = {
      .rate = 24000000,
};

static struct clk_lookup lookups[] = {
      {     /* UART0 */
            .dev_id           = "dev:uart0",
            .clk        = &ref24_clk,
      }, {  /* UART1 */
            .dev_id           = "dev:uart1",
            .clk        = &ref24_clk,
      }, {  /* UART2 */
            .dev_id           = "dev:uart2",
            .clk        = &ref24_clk,
      }, {  /* UART3 */
            .dev_id           = "fpga:uart3",
            .clk        = &ref24_clk,
      }, {  /* KMI0 */
            .dev_id           = "fpga:kmi0",
            .clk        = &ref24_clk,
      }, {  /* KMI1 */
            .dev_id           = "fpga:kmi1",
            .clk        = &ref24_clk,
      }, {  /* MMC0 */
            .dev_id           = "fpga:mmc0",
            .clk        = &ref24_clk,
      }, {  /* EB:CLCD */
            .dev_id           = "dev:clcd",
            .clk        = &oscvco_clk,
      }, {  /* PB:CLCD */
            .dev_id           = "issp:clcd",
            .clk        = &oscvco_clk,
      }
};

static int __init clk_init(void)
{
      int i;

      for (i = 0; i < ARRAY_SIZE(lookups); i++)
            clkdev_add(&lookups[i]);
      return 0;
}
arch_initcall(clk_init);

/*
 * CLCD support.
 */
#define SYS_CLCD_NLCDIOON     (1 << 2)
#define SYS_CLCD_VDDPOSSWITCH (1 << 3)
#define SYS_CLCD_PWR3V5SWITCH (1 << 4)
#define SYS_CLCD_ID_MASK      (0x1f << 8)
#define SYS_CLCD_ID_SANYO_3_8 (0x00 << 8)
#define SYS_CLCD_ID_UNKNOWN_8_4     (0x01 << 8)
#define SYS_CLCD_ID_EPSON_2_2 (0x02 << 8)
#define SYS_CLCD_ID_SANYO_2_5 (0x07 << 8)
#define SYS_CLCD_ID_VGA       (0x1f << 8)

static struct clcd_panel vga = {
      .mode       = {
            .name       = "VGA",
            .refresh    = 60,
            .xres       = 640,
            .yres       = 480,
            .pixclock   = 39721,
            .left_margin      = 40,
            .right_margin     = 24,
            .upper_margin     = 32,
            .lower_margin     = 11,
            .hsync_len  = 96,
            .vsync_len  = 2,
            .sync       = 0,
            .vmode            = FB_VMODE_NONINTERLACED,
      },
      .width            = -1,
      .height           = -1,
      .tim2       = TIM2_BCD | TIM2_IPC,
      .cntl       = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
      .bpp        = 16,
};

static struct clcd_panel xvga = {
      .mode       = {
            .name       = "XVGA",
            .refresh    = 60,
            .xres       = 1024,
            .yres       = 768,
            .pixclock   = 15748,
            .left_margin      = 152,
            .right_margin     = 48,
            .upper_margin     = 23,
            .lower_margin     = 3,
            .hsync_len  = 104,
            .vsync_len  = 4,
            .sync       = 0,
            .vmode            = FB_VMODE_NONINTERLACED,
      },
      .width            = -1,
      .height           = -1,
      .tim2       = TIM2_BCD | TIM2_IPC,
      .cntl       = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
      .bpp        = 16,
};

static struct clcd_panel sanyo_3_8_in = {
      .mode       = {
            .name       = "Sanyo QVGA",
            .refresh    = 116,
            .xres       = 320,
            .yres       = 240,
            .pixclock   = 100000,
            .left_margin      = 6,
            .right_margin     = 6,
            .upper_margin     = 5,
            .lower_margin     = 5,
            .hsync_len  = 6,
            .vsync_len  = 6,
            .sync       = 0,
            .vmode            = FB_VMODE_NONINTERLACED,
      },
      .width            = -1,
      .height           = -1,
      .tim2       = TIM2_BCD,
      .cntl       = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
      .bpp        = 16,
};

static struct clcd_panel sanyo_2_5_in = {
      .mode       = {
            .name       = "Sanyo QVGA Portrait",
            .refresh    = 116,
            .xres       = 240,
            .yres       = 320,
            .pixclock   = 100000,
            .left_margin      = 20,
            .right_margin     = 10,
            .upper_margin     = 2,
            .lower_margin     = 2,
            .hsync_len  = 10,
            .vsync_len  = 2,
            .sync       = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
            .vmode            = FB_VMODE_NONINTERLACED,
      },
      .width            = -1,
      .height           = -1,
      .tim2       = TIM2_IVS | TIM2_IHS | TIM2_IPC,
      .cntl       = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
      .bpp        = 16,
};

static struct clcd_panel epson_2_2_in = {
      .mode       = {
            .name       = "Epson QCIF",
            .refresh    = 390,
            .xres       = 176,
            .yres       = 220,
            .pixclock   = 62500,
            .left_margin      = 3,
            .right_margin     = 2,
            .upper_margin     = 1,
            .lower_margin     = 0,
            .hsync_len  = 3,
            .vsync_len  = 2,
            .sync       = 0,
            .vmode            = FB_VMODE_NONINTERLACED,
      },
      .width            = -1,
      .height           = -1,
      .tim2       = TIM2_BCD | TIM2_IPC,
      .cntl       = CNTL_LCDTFT | CNTL_BGR | CNTL_LCDVCOMP(1),
      .bpp        = 16,
};

/*
 * Detect which LCD panel is connected, and return the appropriate
 * clcd_panel structure.  Note: we do not have any information on
 * the required timings for the 8.4in panel, so we presently assume
 * VGA timings.
 */
static struct clcd_panel *realview_clcd_panel(void)
{
      void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
      struct clcd_panel *vga_panel;
      struct clcd_panel *panel;
      u32 val;

      if (machine_is_realview_eb())
            vga_panel = &vga;
      else
            vga_panel = &xvga;

      val = readl(sys_clcd) & SYS_CLCD_ID_MASK;
      if (val == SYS_CLCD_ID_SANYO_3_8)
            panel = &sanyo_3_8_in;
      else if (val == SYS_CLCD_ID_SANYO_2_5)
            panel = &sanyo_2_5_in;
      else if (val == SYS_CLCD_ID_EPSON_2_2)
            panel = &epson_2_2_in;
      else if (val == SYS_CLCD_ID_VGA)
            panel = vga_panel;
      else {
            printk(KERN_ERR "CLCD: unknown LCD panel ID 0x%08x, using VGA\n",
                  val);
            panel = vga_panel;
      }

      return panel;
}

/*
 * Disable all display connectors on the interface module.
 */
static void realview_clcd_disable(struct clcd_fb *fb)
{
      void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
      u32 val;

      val = readl(sys_clcd);
      val &= ~SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
      writel(val, sys_clcd);
}

/*
 * Enable the relevant connector on the interface module.
 */
static void realview_clcd_enable(struct clcd_fb *fb)
{
      void __iomem *sys_clcd = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_CLCD_OFFSET;
      u32 val;

      /*
       * Enable the PSUs
       */
      val = readl(sys_clcd);
      val |= SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH;
      writel(val, sys_clcd);
}

static int realview_clcd_setup(struct clcd_fb *fb)
{
      unsigned long framesize;
      dma_addr_t dma;

      if (machine_is_realview_eb())
            /* VGA, 16bpp */
            framesize = 640 * 480 * 2;
      else
            /* XVGA, 16bpp */
            framesize = 1024 * 768 * 2;

      fb->panel         = realview_clcd_panel();

      fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, framesize,
                                        &dma, GFP_KERNEL | GFP_DMA);
      if (!fb->fb.screen_base) {
            printk(KERN_ERR "CLCD: unable to map framebuffer\n");
            return -ENOMEM;
      }

      fb->fb.fix.smem_start   = dma;
      fb->fb.fix.smem_len     = framesize;

      return 0;
}

static int realview_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
{
      return dma_mmap_writecombine(&fb->dev->dev, vma,
                             fb->fb.screen_base,
                             fb->fb.fix.smem_start,
                             fb->fb.fix.smem_len);
}

static void realview_clcd_remove(struct clcd_fb *fb)
{
      dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
                        fb->fb.screen_base, fb->fb.fix.smem_start);
}

struct clcd_board clcd_plat_data = {
      .name       = "RealView",
      .check            = clcdfb_check,
      .decode           = clcdfb_decode,
      .disable    = realview_clcd_disable,
      .enable           = realview_clcd_enable,
      .setup            = realview_clcd_setup,
      .mmap       = realview_clcd_mmap,
      .remove           = realview_clcd_remove,
};

#ifdef CONFIG_LEDS
#define VA_LEDS_BASE (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_LED_OFFSET)

void realview_leds_event(led_event_t ledevt)
{
      unsigned long flags;
      u32 val;
      u32 led = 1 << smp_processor_id();

      local_irq_save(flags);
      val = readl(VA_LEDS_BASE);

      switch (ledevt) {
      case led_idle_start:
            val = val & ~led;
            break;

      case led_idle_end:
            val = val | led;
            break;

      case led_timer:
            val = val ^ REALVIEW_SYS_LED7;
            break;

      case led_halted:
            val = 0;
            break;

      default:
            break;
      }

      writel(val, VA_LEDS_BASE);
      local_irq_restore(flags);
}
#endif      /* CONFIG_LEDS */

/*
 * Where is the timer (VA)?
 */
void __iomem *timer0_va_base;
void __iomem *timer1_va_base;
void __iomem *timer2_va_base;
void __iomem *timer3_va_base;

/*
 * How long is the timer interval?
 */
#define TIMER_INTERVAL  (TICKS_PER_uSEC * mSEC_10)
#if TIMER_INTERVAL >= 0x100000
#define TIMER_RELOAD    (TIMER_INTERVAL >> 8)
#define TIMER_DIVISOR   (TIMER_CTRL_DIV256)
#define TICKS2USECS(x)  (256 * (x) / TICKS_PER_uSEC)
#elif TIMER_INTERVAL >= 0x10000
#define TIMER_RELOAD    (TIMER_INTERVAL >> 4)         /* Divide by 16 */
#define TIMER_DIVISOR   (TIMER_CTRL_DIV16)
#define TICKS2USECS(x)  (16 * (x) / TICKS_PER_uSEC)
#else
#define TIMER_RELOAD    (TIMER_INTERVAL)
#define TIMER_DIVISOR   (TIMER_CTRL_DIV1)
#define TICKS2USECS(x)  ((x) / TICKS_PER_uSEC)
#endif

static void timer_set_mode(enum clock_event_mode mode,
                     struct clock_event_device *clk)
{
      unsigned long ctrl;

      switch(mode) {
      case CLOCK_EVT_MODE_PERIODIC:
            writel(TIMER_RELOAD, timer0_va_base + TIMER_LOAD);

            ctrl = TIMER_CTRL_PERIODIC;
            ctrl |= TIMER_CTRL_32BIT | TIMER_CTRL_IE | TIMER_CTRL_ENABLE;
            break;
      case CLOCK_EVT_MODE_ONESHOT:
            /* period set, and timer enabled in 'next_event' hook */
            ctrl = TIMER_CTRL_ONESHOT;
            ctrl |= TIMER_CTRL_32BIT | TIMER_CTRL_IE;
            break;
      case CLOCK_EVT_MODE_UNUSED:
      case CLOCK_EVT_MODE_SHUTDOWN:
      default:
            ctrl = 0;
      }

      writel(ctrl, timer0_va_base + TIMER_CTRL);
}

static int timer_set_next_event(unsigned long evt,
                        struct clock_event_device *unused)
{
      unsigned long ctrl = readl(timer0_va_base + TIMER_CTRL);

      writel(evt, timer0_va_base + TIMER_LOAD);
      writel(ctrl | TIMER_CTRL_ENABLE, timer0_va_base + TIMER_CTRL);

      return 0;
}

static struct clock_event_device timer0_clockevent =   {
      .name       = "timer0",
      .shift            = 32,
      .features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
      .set_mode   = timer_set_mode,
      .set_next_event   = timer_set_next_event,
      .rating           = 300,
      .cpumask    = cpu_all_mask,
};

static void __init realview_clockevents_init(unsigned int timer_irq)
{
      timer0_clockevent.irq = timer_irq;
      timer0_clockevent.mult =
            div_sc(1000000, NSEC_PER_SEC, timer0_clockevent.shift);
      timer0_clockevent.max_delta_ns =
            clockevent_delta2ns(0xffffffff, &timer0_clockevent);
      timer0_clockevent.min_delta_ns =
            clockevent_delta2ns(0xf, &timer0_clockevent);

      clockevents_register_device(&timer0_clockevent);
}

/*
 * IRQ handler for the timer
 */
static irqreturn_t realview_timer_interrupt(int irq, void *dev_id)
{
      struct clock_event_device *evt = &timer0_clockevent;

      /* clear the interrupt */
      writel(1, timer0_va_base + TIMER_INTCLR);

      evt->event_handler(evt);

      return IRQ_HANDLED;
}

static struct irqaction realview_timer_irq = {
      .name       = "RealView Timer Tick",
      .flags            = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
      .handler    = realview_timer_interrupt,
};

static cycle_t realview_get_cycles(struct clocksource *cs)
{
      return ~readl(timer3_va_base + TIMER_VALUE);
}

static struct clocksource clocksource_realview = {
      .name = "timer3",
      .rating     = 200,
      .read = realview_get_cycles,
      .mask = CLOCKSOURCE_MASK(32),
      .shift      = 20,
      .flags      = CLOCK_SOURCE_IS_CONTINUOUS,
};

static void __init realview_clocksource_init(void)
{
      /* setup timer 0 as free-running clocksource */
      writel(0, timer3_va_base + TIMER_CTRL);
      writel(0xffffffff, timer3_va_base + TIMER_LOAD);
      writel(0xffffffff, timer3_va_base + TIMER_VALUE);
      writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
            timer3_va_base + TIMER_CTRL);

      clocksource_realview.mult =
            clocksource_khz2mult(1000, clocksource_realview.shift);
      clocksource_register(&clocksource_realview);
}

/*
 * Set up the clock source and clock events devices
 */
void __init realview_timer_init(unsigned int timer_irq)
{
      u32 val;

      /* 
       * set clock frequency: 
       *    REALVIEW_REFCLK is 32KHz
       *    REALVIEW_TIMCLK is 1MHz
       */
      val = readl(__io_address(REALVIEW_SCTL_BASE));
      writel((REALVIEW_TIMCLK << REALVIEW_TIMER1_EnSel) |
             (REALVIEW_TIMCLK << REALVIEW_TIMER2_EnSel) | 
             (REALVIEW_TIMCLK << REALVIEW_TIMER3_EnSel) |
             (REALVIEW_TIMCLK << REALVIEW_TIMER4_EnSel) | val,
             __io_address(REALVIEW_SCTL_BASE));

      /*
       * Initialise to a known state (all timers off)
       */
      writel(0, timer0_va_base + TIMER_CTRL);
      writel(0, timer1_va_base + TIMER_CTRL);
      writel(0, timer2_va_base + TIMER_CTRL);
      writel(0, timer3_va_base + TIMER_CTRL);

      /* 
       * Make irqs happen for the system timer
       */
      setup_irq(timer_irq, &realview_timer_irq);

      realview_clocksource_init();
      realview_clockevents_init(timer_irq);
}

/*
 * Setup the memory banks.
 */
void realview_fixup(struct machine_desc *mdesc, struct tag *tags, char **from,
                struct meminfo *meminfo)
{
      /*
       * Most RealView platforms have 512MB contiguous RAM at 0x70000000.
       * Half of this is mirrored at 0.
       */
#ifdef CONFIG_REALVIEW_HIGH_PHYS_OFFSET
      meminfo->bank[0].start = 0x70000000;
      meminfo->bank[0].size = SZ_512M;
      meminfo->nr_banks = 1;
#else
      meminfo->bank[0].start = 0;
      meminfo->bank[0].size = SZ_256M;
      meminfo->nr_banks = 1;
#endif
}

Generated by  Doxygen 1.6.0   Back to index