Logo Search packages:      
Sourcecode: linux version File versions  Download package

micro9.c

/*
 *  linux/arch/arm/mach-ep93xx/micro9.c
 *
 * Copyright (C) 2006 Contec Steuerungstechnik & Automation GmbH
 *                    Manfred Gruber <m.gruber@tirol.com>
 * Copyright (C) 2009 Contec Steuerungstechnik & Automation GmbH
 *                    Hubert Feurstein <hubert.feurstein@contec.at>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <linux/io.h>

#include <mach/hardware.h>

#include <asm/mach-types.h>
#include <asm/mach/arch.h>


/*************************************************************************
 * Micro9 NOR Flash
 *
 * Micro9-High has up to 64MB of 32-bit flash on CS1
 * Micro9-Mid has up to 64MB of either 32-bit or 16-bit flash on CS1
 * Micro9-Lite uses a seperate MTD map driver for flash support
 * Micro9-Slim has up to 64MB of either 32-bit or 16-bit flash on CS1
 *************************************************************************/
static struct physmap_flash_data micro9_flash_data;

static struct resource micro9_flash_resource = {
      .start            = EP93XX_CS1_PHYS_BASE,
      .end        = EP93XX_CS1_PHYS_BASE + SZ_64M - 1,
      .flags            = IORESOURCE_MEM,
};

static struct platform_device micro9_flash = {
      .name       = "physmap-flash",
      .id         = 0,
      .dev        = {
            .platform_data    = &micro9_flash_data,
      },
      .num_resources    = 1,
      .resource   = &micro9_flash_resource,
};

static void __init __micro9_register_flash(unsigned int width)
{
      micro9_flash_data.width = width;

      platform_device_register(&micro9_flash);
}

static unsigned int __init micro9_detect_bootwidth(void)
{
      u32 v;

      /* Detect the bus width of the external flash memory */
      v = __raw_readl(EP93XX_SYSCON_SYSCFG);
      if (v & EP93XX_SYSCON_SYSCFG_LCSN7)
            return 4; /* 32-bit */
      else
            return 2; /* 16-bit */
}

static void __init micro9_register_flash(void)
{
      if (machine_is_micro9())
            __micro9_register_flash(4);
      else if (machine_is_micro9m() || machine_is_micro9s())
            __micro9_register_flash(micro9_detect_bootwidth());
}


/*************************************************************************
 * Micro9 Ethernet
 *************************************************************************/
static struct ep93xx_eth_data micro9_eth_data = {
      .phy_id           = 0x1f,
};


static void __init micro9_init_machine(void)
{
      ep93xx_init_devices();
      ep93xx_register_eth(&micro9_eth_data, 1);
      micro9_register_flash();
}


#ifdef CONFIG_MACH_MICRO9H
MACHINE_START(MICRO9, "Contec Micro9-High")
      /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
      .phys_io    = EP93XX_APB_PHYS_BASE,
      .io_pg_offst      = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
      .boot_params      = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
      .map_io           = ep93xx_map_io,
      .init_irq   = ep93xx_init_irq,
      .timer            = &ep93xx_timer,
      .init_machine     = micro9_init_machine,
MACHINE_END
#endif

#ifdef CONFIG_MACH_MICRO9M
MACHINE_START(MICRO9M, "Contec Micro9-Mid")
      /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
      .phys_io    = EP93XX_APB_PHYS_BASE,
      .io_pg_offst      = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
      .boot_params      = EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100,
      .map_io           = ep93xx_map_io,
      .init_irq   = ep93xx_init_irq,
      .timer            = &ep93xx_timer,
      .init_machine     = micro9_init_machine,
MACHINE_END
#endif

#ifdef CONFIG_MACH_MICRO9L
MACHINE_START(MICRO9L, "Contec Micro9-Lite")
      /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
      .phys_io    = EP93XX_APB_PHYS_BASE,
      .io_pg_offst      = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
      .boot_params      = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
      .map_io           = ep93xx_map_io,
      .init_irq   = ep93xx_init_irq,
      .timer            = &ep93xx_timer,
      .init_machine     = micro9_init_machine,
MACHINE_END
#endif

#ifdef CONFIG_MACH_MICRO9S
MACHINE_START(MICRO9S, "Contec Micro9-Slim")
      /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
      .phys_io    = EP93XX_APB_PHYS_BASE,
      .io_pg_offst      = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
      .boot_params      = EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100,
      .map_io           = ep93xx_map_io,
      .init_irq   = ep93xx_init_irq,
      .timer            = &ep93xx_timer,
      .init_machine     = micro9_init_machine,
MACHINE_END
#endif

Generated by  Doxygen 1.6.0   Back to index