Logo Search packages:      
Sourcecode: linux version File versions  Download package

dev-spi.c

/* linux/arch/arm/mach-s5pv210/dev-spi.c
 *
 * Copyright (C) 2010 Samsung Electronics Co. Ltd.
 *    Jaswinder Singh <jassi.brar@samsung.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>

#include <mach/dma.h>
#include <mach/map.h>
#include <mach/irqs.h>
#include <mach/spi-clocks.h>

#include <plat/s3c64xx-spi.h>
#include <plat/gpio-cfg.h>

static char *spi_src_clks[] = {
      [S5PV210_SPI_SRCCLK_PCLK] = "pclk",
      [S5PV210_SPI_SRCCLK_SCLK] = "sclk_spi",
};

/* SPI Controller platform_devices */

/* Since we emulate multi-cs capability, we do not touch the CS.
 * The emulated CS is toggled by board specific mechanism, as it can
 * be either some immediate GPIO or some signal out of some other
 * chip in between ... or some yet another way.
 * We simply do not assume anything about CS.
 */
static int s5pv210_spi_cfg_gpio(struct platform_device *pdev)
{
      unsigned int base;

      switch (pdev->id) {
      case 0:
            base = S5PV210_GPB(0);
            break;

      case 1:
            base = S5PV210_GPB(4);
            break;

      default:
            dev_err(&pdev->dev, "Invalid SPI Controller number!");
            return -EINVAL;
      }

      s3c_gpio_cfgall_range(base, 3,
                        S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);

      return 0;
}

static struct resource s5pv210_spi0_resource[] = {
      [0] = {
            .start = S5PV210_PA_SPI0,
            .end   = S5PV210_PA_SPI0 + 0x100 - 1,
            .flags = IORESOURCE_MEM,
      },
      [1] = {
            .start = DMACH_SPI0_TX,
            .end   = DMACH_SPI0_TX,
            .flags = IORESOURCE_DMA,
      },
      [2] = {
            .start = DMACH_SPI0_RX,
            .end   = DMACH_SPI0_RX,
            .flags = IORESOURCE_DMA,
      },
      [3] = {
            .start = IRQ_SPI0,
            .end   = IRQ_SPI0,
            .flags = IORESOURCE_IRQ,
      },
};

static struct s3c64xx_spi_info s5pv210_spi0_pdata = {
      .cfg_gpio = s5pv210_spi_cfg_gpio,
      .fifo_lvl_mask = 0x1ff,
      .rx_lvl_offset = 15,
      .high_speed = 1,
};

static u64 spi_dmamask = DMA_BIT_MASK(32);

struct platform_device s5pv210_device_spi0 = {
      .name         = "s3c64xx-spi",
      .id           = 0,
      .num_resources      = ARRAY_SIZE(s5pv210_spi0_resource),
      .resource     = s5pv210_spi0_resource,
      .dev = {
            .dma_mask         = &spi_dmamask,
            .coherent_dma_mask      = DMA_BIT_MASK(32),
            .platform_data = &s5pv210_spi0_pdata,
      },
};

static struct resource s5pv210_spi1_resource[] = {
      [0] = {
            .start = S5PV210_PA_SPI1,
            .end   = S5PV210_PA_SPI1 + 0x100 - 1,
            .flags = IORESOURCE_MEM,
      },
      [1] = {
            .start = DMACH_SPI1_TX,
            .end   = DMACH_SPI1_TX,
            .flags = IORESOURCE_DMA,
      },
      [2] = {
            .start = DMACH_SPI1_RX,
            .end   = DMACH_SPI1_RX,
            .flags = IORESOURCE_DMA,
      },
      [3] = {
            .start = IRQ_SPI1,
            .end   = IRQ_SPI1,
            .flags = IORESOURCE_IRQ,
      },
};

static struct s3c64xx_spi_info s5pv210_spi1_pdata = {
      .cfg_gpio = s5pv210_spi_cfg_gpio,
      .fifo_lvl_mask = 0x7f,
      .rx_lvl_offset = 15,
      .high_speed = 1,
};

struct platform_device s5pv210_device_spi1 = {
      .name         = "s3c64xx-spi",
      .id           = 1,
      .num_resources      = ARRAY_SIZE(s5pv210_spi1_resource),
      .resource     = s5pv210_spi1_resource,
      .dev = {
            .dma_mask         = &spi_dmamask,
            .coherent_dma_mask      = DMA_BIT_MASK(32),
            .platform_data = &s5pv210_spi1_pdata,
      },
};

void __init s5pv210_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
{
      struct s3c64xx_spi_info *pd;

      /* Reject invalid configuration */
      if (!num_cs || src_clk_nr < 0
                  || src_clk_nr > S5PV210_SPI_SRCCLK_SCLK) {
            printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__);
            return;
      }

      switch (cntrlr) {
      case 0:
            pd = &s5pv210_spi0_pdata;
            break;
      case 1:
            pd = &s5pv210_spi1_pdata;
            break;
      default:
            printk(KERN_ERR "%s: Invalid SPI controller(%d)\n",
                                          __func__, cntrlr);
            return;
      }

      pd->num_cs = num_cs;
      pd->src_clk_nr = src_clk_nr;
      pd->src_clk_name = spi_src_clks[src_clk_nr];
}

Generated by  Doxygen 1.6.0   Back to index