Logo Search packages:      
Sourcecode: linux version File versions  Download package

guruplug-setup.c

/*
 * arch/arm/mach-kirkwood/guruplug-setup.c
 *
 * Marvell GuruPlug Reference Board Setup
 *
 * This file is licensed under the terms of the GNU General Public
 * License version 2.  This program is licensed "as is" without any
 * warranty of any kind, whether express or implied.
 */

#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mtd/partitions.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
#include <linux/gpio.h>
#include <linux/leds.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
#include <plat/mvsdio.h>
#include "common.h"
#include "mpp.h"

static struct mtd_partition guruplug_nand_parts[] = {
      {
            .name = "u-boot",
            .offset = 0,
            .size = SZ_1M
      }, {
            .name = "uImage",
            .offset = MTDPART_OFS_NXTBLK,
            .size = SZ_4M
      }, {
            .name = "root",
            .offset = MTDPART_OFS_NXTBLK,
            .size = MTDPART_SIZ_FULL
      },
};

static struct mv643xx_eth_platform_data guruplug_ge00_data = {
      .phy_addr   = MV643XX_ETH_PHY_ADDR(0),
};

static struct mv643xx_eth_platform_data guruplug_ge01_data = {
      .phy_addr   = MV643XX_ETH_PHY_ADDR(1),
};

static struct mv_sata_platform_data guruplug_sata_data = {
      .n_ports    = 1,
};

static struct mvsdio_platform_data guruplug_mvsdio_data = {
      /* unfortunately the CD signal has not been connected */
};

static struct gpio_led guruplug_led_pins[] = {
      {
            .name             = "guruplug:red:health",
            .gpio             = 46,
            .active_low       = 1,
      },
      {
            .name             = "guruplug:green:health",
            .gpio             = 47,
            .active_low       = 1,
      },
      {
            .name             = "guruplug:red:wmode",
            .gpio             = 48,
            .active_low       = 1,
      },
      {
            .name             = "guruplug:green:wmode",
            .gpio             = 49,
            .active_low       = 1,
      },
};

static struct gpio_led_platform_data guruplug_led_data = {
      .leds       = guruplug_led_pins,
      .num_leds   = ARRAY_SIZE(guruplug_led_pins),
};

static struct platform_device guruplug_leds = {
      .name = "leds-gpio",
      .id   = -1,
      .dev  = {
            .platform_data    = &guruplug_led_data,
      }
};

static unsigned int guruplug_mpp_config[] __initdata = {
      MPP46_GPIO, /* M_RLED */
      MPP47_GPIO, /* M_GLED */
      MPP48_GPIO, /* B_RLED */
      MPP49_GPIO, /* B_GLED */
      0
};

static void __init guruplug_init(void)
{
      /*
       * Basic setup. Needs to be called early.
       */
      kirkwood_init();
      kirkwood_mpp_conf(guruplug_mpp_config);

      kirkwood_uart0_init();
      kirkwood_nand_init(ARRAY_AND_SIZE(guruplug_nand_parts), 25);

      kirkwood_ehci_init();
      kirkwood_ge00_init(&guruplug_ge00_data);
      kirkwood_ge01_init(&guruplug_ge01_data);
      kirkwood_sata_init(&guruplug_sata_data);
      kirkwood_sdio_init(&guruplug_mvsdio_data);

      platform_device_register(&guruplug_leds);
}

MACHINE_START(GURUPLUG, "Marvell GuruPlug Reference Board")
      /* Maintainer: Siddarth Gore <gores@marvell.com> */
      .boot_params      = 0x00000100,
      .init_machine     = guruplug_init,
      .map_io           = kirkwood_map_io,
      .init_irq   = kirkwood_init_irq,
      .timer            = &kirkwood_timer,
MACHINE_END

Generated by  Doxygen 1.6.0   Back to index