Logo Search packages:      
Sourcecode: linux version File versions  Download package

jasper.c

/*
 *  linux/arch/arm/mach-mmp/jasper.c
 *
 *  Support for the Marvell Jasper Development Platform.
 *
 *  Copyright (C) 2009-2010 Marvell International Ltd.
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License version 2 as
 *  publishhed by the Free Software Foundation.
 */

#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/max8649.h>
#include <linux/mfd/max8925.h>
#include <linux/interrupt.h>

#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/addr-map.h>
#include <mach/mfp-mmp2.h>
#include <mach/mmp2.h>

#include "common.h"

#define JASPER_NR_IRQS        (IRQ_BOARD_START + 48)

static unsigned long jasper_pin_config[] __initdata = {
      /* UART1 */
      GPIO29_UART1_RXD,
      GPIO30_UART1_TXD,

      /* UART3 */
      GPIO51_UART3_RXD,
      GPIO52_UART3_TXD,

      /* DFI */
      GPIO168_DFI_D0,
      GPIO167_DFI_D1,
      GPIO166_DFI_D2,
      GPIO165_DFI_D3,
      GPIO107_DFI_D4,
      GPIO106_DFI_D5,
      GPIO105_DFI_D6,
      GPIO104_DFI_D7,
      GPIO111_DFI_D8,
      GPIO164_DFI_D9,
      GPIO163_DFI_D10,
      GPIO162_DFI_D11,
      GPIO161_DFI_D12,
      GPIO110_DFI_D13,
      GPIO109_DFI_D14,
      GPIO108_DFI_D15,
      GPIO143_ND_nCS0,
      GPIO144_ND_nCS1,
      GPIO147_ND_nWE,
      GPIO148_ND_nRE,
      GPIO150_ND_ALE,
      GPIO149_ND_CLE,
      GPIO112_ND_RDY0,
      GPIO160_ND_RDY1,

      /* PMIC */
      PMIC_PMIC_INT | MFP_LPM_EDGE_FALL,

      /* MMC1 */
      GPIO131_MMC1_DAT3,
      GPIO132_MMC1_DAT2,
      GPIO133_MMC1_DAT1,
      GPIO134_MMC1_DAT0,
      GPIO136_MMC1_CMD,
      GPIO139_MMC1_CLK,
      GPIO140_MMC1_CD,
      GPIO141_MMC1_WP,

      /* MMC2 */
      GPIO37_MMC2_DAT3,
      GPIO38_MMC2_DAT2,
      GPIO39_MMC2_DAT1,
      GPIO40_MMC2_DAT0,
      GPIO41_MMC2_CMD,
      GPIO42_MMC2_CLK,

      /* MMC3 */
      GPIO165_MMC3_DAT7,
      GPIO162_MMC3_DAT6,
      GPIO166_MMC3_DAT5,
      GPIO163_MMC3_DAT4,
      GPIO167_MMC3_DAT3,
      GPIO164_MMC3_DAT2,
      GPIO168_MMC3_DAT1,
      GPIO111_MMC3_DAT0,
      GPIO112_MMC3_CMD,
      GPIO151_MMC3_CLK,
};

static struct regulator_consumer_supply max8649_supply[] = {
      REGULATOR_SUPPLY("vcc_core", NULL),
};

static struct regulator_init_data max8649_init_data = {
      .constraints      = {
            .name       = "vcc_core range",
            .min_uV           = 1150000,
            .max_uV           = 1280000,
            .always_on  = 1,
            .boot_on    = 1,
            .valid_ops_mask   = REGULATOR_CHANGE_VOLTAGE,
      },
      .num_consumer_supplies  = 1,
      .consumer_supplies      = &max8649_supply[0],
};

static struct max8649_platform_data jasper_max8649_info = {
      .mode       = 2,  /* VID1 = 1, VID0 = 0 */
      .extclk           = 0,
      .ramp_timing      = MAX8649_RAMP_32MV,
      .regulator  = &max8649_init_data,
};

static struct max8925_backlight_pdata jasper_backlight_data = {
      .dual_string      = 0,
};

static struct max8925_power_pdata jasper_power_data = {
      .batt_detect            = 0,  /* can't detect battery by ID pin */
      .topoff_threshold = MAX8925_TOPOFF_THR_10PER,
      .fast_charge            = MAX8925_FCHG_1000MA,
};

static struct max8925_platform_data jasper_max8925_info = {
      .backlight        = &jasper_backlight_data,
      .power                  = &jasper_power_data,
      .irq_base         = IRQ_BOARD_START,
};

static struct i2c_board_info jasper_twsi1_info[] = {
      [0] = {
            .type       = "max8649",
            .addr       = 0x60,
            .platform_data    = &jasper_max8649_info,
      },
      [1] = {
            .type       = "max8925",
            .addr       = 0x3c,
            .irq        = IRQ_MMP2_PMIC,
            .platform_data    = &jasper_max8925_info,
      },
};

static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc0 = {
      .max_speed  = 25000000,
};

static void __init jasper_init(void)
{
      mfp_config(ARRAY_AND_SIZE(jasper_pin_config));

      /* on-chip devices */
      mmp2_add_uart(1);
      mmp2_add_uart(3);
      mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(jasper_twsi1_info));
      mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */

      regulator_has_full_constraints();
}

MACHINE_START(MARVELL_JASPER, "Jasper Development Platform")
      .map_io           = mmp_map_io,
      .nr_irqs    = JASPER_NR_IRQS,
      .init_irq       = mmp2_init_irq,
      .timer          = &mmp2_timer,
      .init_machine   = jasper_init,
MACHINE_END

Generated by  Doxygen 1.6.0   Back to index