Logo Search packages:      
Sourcecode: linux version File versions  Download package

lacie_v2-common.c

/*
 * arch/arm/mach-kirkwood/lacie_v2-common.c
 *
 * This file is licensed under the terms of the GNU General Public
 * License version 2.  This program is licensed "as is" without any
 * warranty of any kind, whether express or implied.
 */

#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mtd/physmap.h>
#include <linux/spi/flash.h>
#include <linux/spi/spi.h>
#include <linux/i2c.h>
#include <linux/i2c/at24.h>
#include <linux/gpio.h>
#include <asm/mach/time.h>
#include <mach/kirkwood.h>
#include <mach/irqs.h>
#include <plat/time.h>
#include "common.h"

/*****************************************************************************
 * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005)
 ****************************************************************************/

static struct mtd_partition lacie_v2_flash_parts[] = {
      {
            .name = "u-boot",
            .size = MTDPART_SIZ_FULL,
            .offset = 0,
            .mask_flags = MTD_WRITEABLE, /* force read-only */
      },
};

static const struct flash_platform_data lacie_v2_flash = {
      .type       = "mx25l4005a",
      .name       = "spi_flash",
      .parts            = lacie_v2_flash_parts,
      .nr_parts   = ARRAY_SIZE(lacie_v2_flash_parts),
};

static struct spi_board_info __initdata lacie_v2_spi_slave_info[] = {
      {
            .modalias   = "m25p80",
            .platform_data    = &lacie_v2_flash,
            .irq        = -1,
            .max_speed_hz     = 20000000,
            .bus_num    = 0,
            .chip_select      = 0,
      },
};

void __init lacie_v2_register_flash(void)
{
      spi_register_board_info(lacie_v2_spi_slave_info,
                        ARRAY_SIZE(lacie_v2_spi_slave_info));
      kirkwood_spi_init();
}

/*****************************************************************************
 * I2C devices
 ****************************************************************************/

static struct at24_platform_data at24c04 = {
      .byte_len   = SZ_4K / 8,
      .page_size  = 16,
};

/*
 * i2c addr | chip         | description
 * 0x50     | HT24LC04     | eeprom (512B)
 */

static struct i2c_board_info __initdata lacie_v2_i2c_info[] = {
      {
            I2C_BOARD_INFO("24c04", 0x50),
            .platform_data  = &at24c04,
      }
};

void __init lacie_v2_register_i2c_devices(void)
{
      kirkwood_i2c_init();
      i2c_register_board_info(0, lacie_v2_i2c_info,
                        ARRAY_SIZE(lacie_v2_i2c_info));
}

/*****************************************************************************
 * Hard Disk power
 ****************************************************************************/

static int __initdata lacie_v2_gpio_hdd_power[] = { 16, 17, 41, 42, 43 };

void __init lacie_v2_hdd_power_init(int hdd_num)
{
      int i;
      int err;

      /* Power up all hard disks. */
      for (i = 0; i < hdd_num; i++) {
            err = gpio_request(lacie_v2_gpio_hdd_power[i], NULL);
            if (err == 0) {
                  err = gpio_direction_output(
                              lacie_v2_gpio_hdd_power[i], 1);
                  /* Free the HDD power GPIOs. This allow user-space to
                   * configure them via the gpiolib sysfs interface. */
                  gpio_free(lacie_v2_gpio_hdd_power[i]);
            }
            if (err)
                  pr_err("Failed to power up HDD%d\n", i + 1);
      }
}

Generated by  Doxygen 1.6.0   Back to index