Logo Search packages:      
Sourcecode: linux version File versions  Download package

stamp.c

/*
 * Copyright 2004-2009 Analog Devices Inc.
 *                2005 National ICT Australia (NICTA)
 *                      Aidan Williams <aidan@nicta.com.au>
 *
 * Licensed under the GPL-2 or later.
 */

#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/plat-ram.h>
#include <linux/mtd/physmap.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#include <linux/usb/isp1362.h>
#endif
#include <linux/i2c.h>
#include <linux/i2c/adp5588.h>
#include <linux/etherdevice.h>
#include <linux/ata_platform.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/usb/sl811.h>
#include <linux/spi/mmc_spi.h>
#include <linux/leds.h>
#include <linux/input.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#include <asm/reboot.h>
#include <asm/portmux.h>
#include <asm/dpmc.h>
#ifdef CONFIG_REGULATOR_FIXED_VOLTAGE
#include <linux/regulator/fixed.h>
#endif
#include <linux/regulator/machine.h>
#include <linux/regulator/consumer.h>
#include <linux/regulator/userspace-consumer.h>

/*
 * Name the Board for the /proc/cpuinfo
 */
const char bfin_board_name[] = "ADI BF537-STAMP";

/*
 *  Driver needs to know address, irq and flag pin.
 */

#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
#include <linux/usb/isp1760.h>
static struct resource bfin_isp1760_resources[] = {
      [0] = {
            .start  = 0x203C0000,
            .end    = 0x203C0000 + 0x000fffff,
            .flags  = IORESOURCE_MEM,
      },
      [1] = {
            .start  = IRQ_PF7,
            .end    = IRQ_PF7,
            .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
      },
};

static struct isp1760_platform_data isp1760_priv = {
      .is_isp1761 = 0,
      .bus_width_16 = 1,
      .port1_otg = 0,
      .analog_oc = 0,
      .dack_polarity_high = 0,
      .dreq_polarity_high = 0,
};

static struct platform_device bfin_isp1760_device = {
      .name           = "isp1760",
      .id             = 0,
      .dev = {
            .platform_data = &isp1760_priv,
      },
      .num_resources  = ARRAY_SIZE(bfin_isp1760_resources),
      .resource       = bfin_isp1760_resources,
};
#endif

#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#include <linux/gpio_keys.h>

static struct gpio_keys_button bfin_gpio_keys_table[] = {
      {BTN_0, GPIO_PF2, 1, "gpio-keys: BTN0"},
      {BTN_1, GPIO_PF3, 1, "gpio-keys: BTN1"},
      {BTN_2, GPIO_PF4, 1, "gpio-keys: BTN2"},
      {BTN_3, GPIO_PF5, 1, "gpio-keys: BTN3"},
};

static struct gpio_keys_platform_data bfin_gpio_keys_data = {
      .buttons        = bfin_gpio_keys_table,
      .nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
};

static struct platform_device bfin_device_gpiokeys = {
      .name      = "gpio-keys",
      .dev = {
            .platform_data = &bfin_gpio_keys_data,
      },
};
#endif

#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
static struct resource bfin_pcmcia_cf_resources[] = {
      {
            .start = 0x20310000, /* IO PORT */
            .end = 0x20312000,
            .flags = IORESOURCE_MEM,
      }, {
            .start = 0x20311000, /* Attribute Memory */
            .end = 0x20311FFF,
            .flags = IORESOURCE_MEM,
      }, {
            .start = IRQ_PF4,
            .end = IRQ_PF4,
            .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
      }, {
            .start = 6, /* Card Detect PF6 */
            .end = 6,
            .flags = IORESOURCE_IRQ,
      },
};

static struct platform_device bfin_pcmcia_cf_device = {
      .name = "bfin_cf_pcmcia",
      .id = -1,
      .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
      .resource = bfin_pcmcia_cf_resources,
};
#endif

#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
static struct platform_device rtc_device = {
      .name = "rtc-bfin",
      .id   = -1,
};
#endif

#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
#include <linux/smc91x.h>

static struct smc91x_platdata smc91x_info = {
      .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
      .leda = RPC_LED_100_10,
      .ledb = RPC_LED_TX_RX,
};

static struct resource smc91x_resources[] = {
      {
            .name = "smc91x-regs",
            .start = 0x20300300,
            .end = 0x20300300 + 16,
            .flags = IORESOURCE_MEM,
      }, {

            .start = IRQ_PF7,
            .end = IRQ_PF7,
            .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
      },
};
static struct platform_device smc91x_device = {
      .name = "smc91x",
      .id = 0,
      .num_resources = ARRAY_SIZE(smc91x_resources),
      .resource = smc91x_resources,
      .dev  = {
            .platform_data    = &smc91x_info,
      },
};
#endif

#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
static struct resource dm9000_resources[] = {
      [0] = {
            .start      = 0x203FB800,
            .end  = 0x203FB800 + 1,
            .flags      = IORESOURCE_MEM,
      },
      [1] = {
            .start      = 0x203FB804,
            .end  = 0x203FB804 + 1,
            .flags      = IORESOURCE_MEM,
      },
      [2] = {
            .start      = IRQ_PF9,
            .end  = IRQ_PF9,
            .flags      = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
      },
};

static struct platform_device dm9000_device = {
      .name       = "dm9000",
      .id         = -1,
      .num_resources    = ARRAY_SIZE(dm9000_resources),
      .resource   = dm9000_resources,
};
#endif

#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
static struct resource sl811_hcd_resources[] = {
      {
            .start = 0x20340000,
            .end = 0x20340000,
            .flags = IORESOURCE_MEM,
      }, {
            .start = 0x20340004,
            .end = 0x20340004,
            .flags = IORESOURCE_MEM,
      }, {
            .start = IRQ_PF4,
            .end = IRQ_PF4,
            .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
      },
};

#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
void sl811_port_power(struct device *dev, int is_on)
{
      gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
      gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on);
}
#endif

static struct sl811_platform_data sl811_priv = {
      .potpg = 10,
      .power = 250,       /* == 500mA */
#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
      .port_power = &sl811_port_power,
#endif
};

static struct platform_device sl811_hcd_device = {
      .name = "sl811-hcd",
      .id = 0,
      .dev = {
            .platform_data = &sl811_priv,
      },
      .num_resources = ARRAY_SIZE(sl811_hcd_resources),
      .resource = sl811_hcd_resources,
};
#endif

#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
static struct resource isp1362_hcd_resources[] = {
      {
            .start = 0x20360000,
            .end = 0x20360000,
            .flags = IORESOURCE_MEM,
      }, {
            .start = 0x20360004,
            .end = 0x20360004,
            .flags = IORESOURCE_MEM,
      }, {
            .start = IRQ_PF3,
            .end = IRQ_PF3,
            .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
      },
};

static struct isp1362_platform_data isp1362_priv = {
      .sel15Kres = 1,
      .clknotstop = 0,
      .oc_enable = 0,
      .int_act_high = 0,
      .int_edge_triggered = 0,
      .remote_wakeup_connected = 0,
      .no_power_switching = 1,
      .power_switching_mode = 0,
};

static struct platform_device isp1362_hcd_device = {
      .name = "isp1362-hcd",
      .id = 0,
      .dev = {
            .platform_data = &isp1362_priv,
      },
      .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
      .resource = isp1362_hcd_resources,
};
#endif

#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
static unsigned short bfin_can_peripherals[] = {
      P_CAN0_RX, P_CAN0_TX, 0
};

static struct resource bfin_can_resources[] = {
      {
            .start = 0xFFC02A00,
            .end = 0xFFC02FFF,
            .flags = IORESOURCE_MEM,
      },
      {
            .start = IRQ_CAN_RX,
            .end = IRQ_CAN_RX,
            .flags = IORESOURCE_IRQ,
      },
      {
            .start = IRQ_CAN_TX,
            .end = IRQ_CAN_TX,
            .flags = IORESOURCE_IRQ,
      },
      {
            .start = IRQ_CAN_ERROR,
            .end = IRQ_CAN_ERROR,
            .flags = IORESOURCE_IRQ,
      },
};

static struct platform_device bfin_can_device = {
      .name = "bfin_can",
      .num_resources = ARRAY_SIZE(bfin_can_resources),
      .resource = bfin_can_resources,
      .dev = {
            .platform_data = &bfin_can_peripherals, /* Passed to driver */
      },
};
#endif

#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
#include <linux/bfin_mac.h>
static const unsigned short bfin_mac_peripherals[] = P_MII0;

static struct bfin_phydev_platform_data bfin_phydev_data[] = {
      {
            .addr = 1,
            .irq = PHY_POLL, /* IRQ_MAC_PHYINT */
      },
};

static struct bfin_mii_bus_platform_data bfin_mii_bus_data = {
      .phydev_number = 1,
      .phydev_data = bfin_phydev_data,
      .phy_mode = PHY_INTERFACE_MODE_MII,
      .mac_peripherals = bfin_mac_peripherals,
};

static struct platform_device bfin_mii_bus = {
      .name = "bfin_mii_bus",
      .dev = {
            .platform_data = &bfin_mii_bus_data,
      }
};

static struct platform_device bfin_mac_device = {
      .name = "bfin_mac",
      .dev = {
            .platform_data = &bfin_mii_bus,
      }
};
#endif

#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
static struct resource net2272_bfin_resources[] = {
      {
            .start = 0x20300000,
            .end = 0x20300000 + 0x100,
            .flags = IORESOURCE_MEM,
      }, {
            .start = IRQ_PF7,
            .end = IRQ_PF7,
            .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
      },
};

static struct platform_device net2272_bfin_device = {
      .name = "net2272",
      .id = -1,
      .num_resources = ARRAY_SIZE(net2272_bfin_resources),
      .resource = net2272_bfin_resources,
};
#endif

#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
#ifdef CONFIG_MTD_PARTITIONS
const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL };

static struct mtd_partition bfin_plat_nand_partitions[] = {
      {
            .name   = "linux kernel(nand)",
            .size   = 0x400000,
            .offset = 0,
      }, {
            .name   = "file system(nand)",
            .size   = MTDPART_SIZ_FULL,
            .offset = MTDPART_OFS_APPEND,
      },
};
#endif

#define BFIN_NAND_PLAT_CLE 2
#define BFIN_NAND_PLAT_ALE 1
static void bfin_plat_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
      struct nand_chip *this = mtd->priv;

      if (cmd == NAND_CMD_NONE)
            return;

      if (ctrl & NAND_CLE)
            writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_CLE));
      else
            writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_ALE));
}

#define BFIN_NAND_PLAT_READY GPIO_PF3
static int bfin_plat_nand_dev_ready(struct mtd_info *mtd)
{
      return gpio_get_value(BFIN_NAND_PLAT_READY);
}

static struct platform_nand_data bfin_plat_nand_data = {
      .chip = {
            .nr_chips = 1,
            .chip_delay = 30,
#ifdef CONFIG_MTD_PARTITIONS
            .part_probe_types = part_probes,
            .partitions = bfin_plat_nand_partitions,
            .nr_partitions = ARRAY_SIZE(bfin_plat_nand_partitions),
#endif
      },
      .ctrl = {
            .cmd_ctrl  = bfin_plat_nand_cmd_ctrl,
            .dev_ready = bfin_plat_nand_dev_ready,
      },
};

#define MAX(x, y) (x > y ? x : y)
static struct resource bfin_plat_nand_resources = {
      .start = 0x20212000,
      .end   = 0x20212000 + (1 << MAX(BFIN_NAND_PLAT_CLE, BFIN_NAND_PLAT_ALE)),
      .flags = IORESOURCE_MEM,
};

static struct platform_device bfin_async_nand_device = {
      .name = "gen_nand",
      .id = -1,
      .num_resources = 1,
      .resource = &bfin_plat_nand_resources,
      .dev = {
            .platform_data = &bfin_plat_nand_data,
      },
};

static void bfin_plat_nand_init(void)
{
      gpio_request(BFIN_NAND_PLAT_READY, "bfin_nand_plat");
}
#else
static void bfin_plat_nand_init(void) {}
#endif

#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
static struct mtd_partition stamp_partitions[] = {
      {
            .name       = "bootloader(nor)",
            .size       = 0x40000,
            .offset     = 0,
      }, {
            .name       = "linux kernel(nor)",
            .size       = 0x180000,
            .offset     = MTDPART_OFS_APPEND,
      }, {
            .name       = "file system(nor)",
            .size       = 0x400000 - 0x40000 - 0x180000 - 0x10000,
            .offset     = MTDPART_OFS_APPEND,
      }, {
            .name       = "MAC Address(nor)",
            .size       = MTDPART_SIZ_FULL,
            .offset     = 0x3F0000,
            .mask_flags = MTD_WRITEABLE,
      }
};

static struct physmap_flash_data stamp_flash_data = {
      .width      = 2,
      .parts      = stamp_partitions,
      .nr_parts   = ARRAY_SIZE(stamp_partitions),
#ifdef CONFIG_ROMKERNEL
      .probe_type = "map_rom",
#endif
};

static struct resource stamp_flash_resource = {
      .start = 0x20000000,
      .end   = 0x203fffff,
      .flags = IORESOURCE_MEM,
};

static struct platform_device stamp_flash_device = {
      .name          = "physmap-flash",
      .id            = 0,
      .dev = {
            .platform_data = &stamp_flash_data,
      },
      .num_resources = 1,
      .resource      = &stamp_flash_resource,
};
#endif

#if defined(CONFIG_MTD_M25P80) \
      || defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
      {
            .name = "bootloader(spi)",
            .size = 0x00040000,
            .offset = 0,
            .mask_flags = MTD_CAP_ROM
      }, {
            .name = "linux kernel(spi)",
            .size = 0x180000,
            .offset = MTDPART_OFS_APPEND,
      }, {
            .name = "file system(spi)",
            .size = MTDPART_SIZ_FULL,
            .offset = MTDPART_OFS_APPEND,
      }
};

static struct flash_platform_data bfin_spi_flash_data = {
      .name = "m25p80",
      .parts = bfin_spi_flash_partitions,
      .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
      /* .type = "m25p64", */
};

/* SPI flash chip (m25p64) */
static struct bfin5xx_spi_chip spi_flash_chip_info = {
      .enable_dma = 0,         /* use dma transfer with this chip*/
      .bits_per_word = 8,
};
#endif

#if defined(CONFIG_BFIN_SPI_ADC) \
      || defined(CONFIG_BFIN_SPI_ADC_MODULE)
/* SPI ADC chip */
static struct bfin5xx_spi_chip spi_adc_chip_info = {
      .enable_dma = 1,         /* use dma transfer with this chip*/
      .bits_per_word = 16,
};
#endif

#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
      || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
      .enable_dma = 0,
      .bits_per_word = 16,
};
#endif

#if defined(CONFIG_SND_BF5XX_SOC_AD193X) \
      || defined(CONFIG_SND_BF5XX_SOC_AD193X_MODULE)
static struct bfin5xx_spi_chip ad1938_spi_chip_info = {
      .enable_dma = 0,
      .bits_per_word = 8,
};
#endif

#if defined(CONFIG_SND_BF5XX_SOC_ADAV80X) \
      || defined(CONFIG_SND_BF5XX_SOC_ADAV80X_MODULE)
static struct bfin5xx_spi_chip adav801_spi_chip_info = {
      .enable_dma = 0,
      .bits_per_word = 8,
};
#endif

#if defined(CONFIG_INPUT_AD714X_SPI) || defined(CONFIG_INPUT_AD714X_SPI_MODULE)
#include <linux/input/ad714x.h>
static struct bfin5xx_spi_chip ad7147_spi_chip_info = {
      .enable_dma = 0,
      .bits_per_word = 16,
};

static struct ad714x_slider_plat ad7147_spi_slider_plat[] = {
      {
            .start_stage = 0,
            .end_stage = 7,
            .max_coord = 128,
      },
};

static struct ad714x_button_plat ad7147_spi_button_plat[] = {
      {
            .keycode = BTN_FORWARD,
            .l_mask = 0,
            .h_mask = 0x600,
      },
      {
            .keycode = BTN_LEFT,
            .l_mask = 0,
            .h_mask = 0x500,
      },
      {
            .keycode = BTN_MIDDLE,
            .l_mask = 0,
            .h_mask = 0x800,
      },
      {
            .keycode = BTN_RIGHT,
            .l_mask = 0x100,
            .h_mask = 0x400,
      },
      {
            .keycode = BTN_BACK,
            .l_mask = 0x200,
            .h_mask = 0x400,
      },
};
static struct ad714x_platform_data ad7147_spi_platform_data = {
      .slider_num = 1,
      .button_num = 5,
      .slider = ad7147_spi_slider_plat,
      .button = ad7147_spi_button_plat,
      .stage_cfg_reg =  {
            {0xFBFF, 0x1FFF, 0, 0x2626, 1600, 1600, 1600, 1600},
            {0xEFFF, 0x1FFF, 0, 0x2626, 1650, 1650, 1650, 1650},
            {0xFFFF, 0x1FFE, 0, 0x2626, 1650, 1650, 1650, 1650},
            {0xFFFF, 0x1FFB, 0, 0x2626, 1650, 1650, 1650, 1650},
            {0xFFFF, 0x1FEF, 0, 0x2626, 1650, 1650, 1650, 1650},
            {0xFFFF, 0x1FBF, 0, 0x2626, 1650, 1650, 1650, 1650},
            {0xFFFF, 0x1EFF, 0, 0x2626, 1650, 1650, 1650, 1650},
            {0xFFFF, 0x1BFF, 0, 0x2626, 1600, 1600, 1600, 1600},
            {0xFF7B, 0x3FFF, 0x506,  0x2626, 1100, 1100, 1150, 1150},
            {0xFDFE, 0x3FFF, 0x606,  0x2626, 1100, 1100, 1150, 1150},
            {0xFEBA, 0x1FFF, 0x1400, 0x2626, 1200, 1200, 1300, 1300},
            {0xFFEF, 0x1FFF, 0x0,    0x2626, 1100, 1100, 1150, 1150},
      },
      .sys_cfg_reg = {0x2B2, 0x0, 0x3233, 0x819, 0x832, 0xCFF, 0xCFF, 0x0},
};
#endif

#if defined(CONFIG_INPUT_AD714X_I2C) || defined(CONFIG_INPUT_AD714X_I2C_MODULE)
#include <linux/input/ad714x.h>
static struct ad714x_button_plat ad7142_i2c_button_plat[] = {
      {
            .keycode = BTN_1,
            .l_mask = 0,
            .h_mask = 0x1,
      },
      {
            .keycode = BTN_2,
            .l_mask = 0,
            .h_mask = 0x2,
      },
      {
            .keycode = BTN_3,
            .l_mask = 0,
            .h_mask = 0x4,
      },
      {
            .keycode = BTN_4,
            .l_mask = 0x0,
            .h_mask = 0x8,
      },
};
static struct ad714x_platform_data ad7142_i2c_platform_data = {
      .button_num = 4,
      .button = ad7142_i2c_button_plat,
      .stage_cfg_reg =  {
            /* fixme: figure out right setting for all comoponent according
             * to hardware feature of EVAL-AD7142EB board */
            {0xE7FF, 0x3FFF, 0x0005, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
            {0xFDBF, 0x3FFF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
            {0xFFFF, 0x2DFF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
            {0xFFFF, 0x37BF, 0x0001, 0x2626, 0x01F4, 0x01F4, 0x028A, 0x028A},
            {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
            {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
            {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
            {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
            {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
            {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
            {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
            {0xFFFF, 0x3FFF, 0x0000, 0x0606, 0x01F4, 0x01F4, 0x0320, 0x0320},
      },
      .sys_cfg_reg = {0x0B2, 0x0, 0x690, 0x664, 0x290F, 0xF, 0xF, 0x0},
};
#endif

#if defined(CONFIG_AD2S90) || defined(CONFIG_AD2S90_MODULE)
static struct bfin5xx_spi_chip ad2s90_spi_chip_info = {
      .enable_dma = 0,
      .bits_per_word = 16,
};
#endif

#if defined(CONFIG_AD2S120X) || defined(CONFIG_AD2S120X_MODULE)
static unsigned short ad2s120x_platform_data[] = {
      /* used as SAMPLE and RDVEL */
      GPIO_PF5, GPIO_PF6, 0
};

static struct bfin5xx_spi_chip ad2s120x_spi_chip_info = {
      .enable_dma = 0,
      .bits_per_word = 16,
};
#endif

#if defined(CONFIG_AD2S1210) || defined(CONFIG_AD2S1210_MODULE)
static unsigned short ad2s1210_platform_data[] = {
      /* use as SAMPLE, A0, A1 */
      GPIO_PF7, GPIO_PF8, GPIO_PF9,
# if defined(CONFIG_AD2S1210_GPIO_INPUT) || defined(CONFIG_AD2S1210_GPIO_OUTPUT)
      /* the RES0 and RES1 pins */
      GPIO_PF4, GPIO_PF5,
# endif
      0,
};

static struct bfin5xx_spi_chip ad2s1210_spi_chip_info = {
      .enable_dma = 0,
      .bits_per_word = 8,
};
#endif

#if defined(CONFIG_AD7314) || defined(CONFIG_AD7314_MODULE)
static struct bfin5xx_spi_chip ad7314_spi_chip_info = {
      .enable_dma = 0,
      .bits_per_word = 16,
};
#endif

#if defined(CONFIG_AD7816) || defined(CONFIG_AD7816_MODULE)
static unsigned short ad7816_platform_data[] = {
      GPIO_PF4, /* rdwr_pin */
      GPIO_PF5, /* convert_pin */
      GPIO_PF7, /* busy_pin */
      0,
};

static struct bfin5xx_spi_chip ad7816_spi_chip_info = {
      .enable_dma = 0,
      .bits_per_word = 8,
};
#endif

#if defined(CONFIG_ADT7310) || defined(CONFIG_ADT7310_MODULE)
static unsigned long adt7310_platform_data[3] = {
/* INT bound temperature alarm event. line 1 */
      IRQ_PG4, IRQF_TRIGGER_LOW,
/* CT bound temperature alarm event irq_flags. line 0 */
      IRQF_TRIGGER_LOW,
};

static struct bfin5xx_spi_chip adt7310_spi_chip_info = {
      .enable_dma = 0,
      .bits_per_word = 8,
};
#endif

#if defined(CONFIG_AD7298) || defined(CONFIG_AD7298_MODULE)
static unsigned short ad7298_platform_data[] = {
      GPIO_PF7, /* busy_pin */
      0,
};

static struct bfin5xx_spi_chip ad7298_spi_chip_info = {
      .enable_dma = 0,
      .bits_per_word = 16,
};
#endif

#if defined(CONFIG_ADT7316_SPI) || defined(CONFIG_ADT7316_SPI_MODULE)
static unsigned long adt7316_spi_data[2] = {
      IRQF_TRIGGER_LOW, /* interrupt flags */
      GPIO_PF7, /* ldac_pin, 0 means DAC/LDAC registers control DAC update */
};

static struct bfin5xx_spi_chip adt7316_spi_chip_info = {
      .enable_dma = 0,
      .bits_per_word = 8,
};
#endif

#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
#define MMC_SPI_CARD_DETECT_INT IRQ_PF5

static int bfin_mmc_spi_init(struct device *dev,
      irqreturn_t (*detect_int)(int, void *), void *data)
{
      return request_irq(MMC_SPI_CARD_DETECT_INT, detect_int,
            IRQF_TRIGGER_FALLING, "mmc-spi-detect", data);
}

static void bfin_mmc_spi_exit(struct device *dev, void *data)
{
      free_irq(MMC_SPI_CARD_DETECT_INT, data);
}

static struct mmc_spi_platform_data bfin_mmc_spi_pdata = {
      .init = bfin_mmc_spi_init,
      .exit = bfin_mmc_spi_exit,
      .detect_delay = 100, /* msecs */
};

static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
      .enable_dma = 0,
      .bits_per_word = 8,
      .pio_interrupt = 0,
};
#endif

#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
#include <linux/spi/ad7877.h>
static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
      .enable_dma = 0,
      .bits_per_word = 16,
};

static const struct ad7877_platform_data bfin_ad7877_ts_info = {
      .model                  = 7877,
      .vref_delay_usecs = 50, /* internal, no capacitor */
      .x_plate_ohms           = 419,
      .y_plate_ohms           = 486,
      .pressure_max           = 1000,
      .pressure_min           = 0,
      .stopacq_polarity = 1,
      .first_conversion_delay = 3,
      .acquisition_time = 1,
      .averaging        = 1,
      .pen_down_acc_interval  = 1,
};
#endif

#if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE)
#include <linux/spi/ad7879.h>
static const struct ad7879_platform_data bfin_ad7879_ts_info = {
      .model                  = 7879,     /* Model = AD7879 */
      .x_plate_ohms           = 620,      /* 620 Ohm from the touch datasheet */
      .pressure_max           = 10000,
      .pressure_min           = 0,
      .first_conversion_delay = 3,  /* wait 512us before do a first conversion */
      .acquisition_time = 1,  /* 4us acquisition time per sample */
      .median                 = 2,  /* do 8 measurements */
      .averaging        = 1,  /* take the average of 4 middle samples */
      .pen_down_acc_interval  = 255,      /* 9.4 ms */
      .gpio_export            = 1,  /* Export GPIO to gpiolib */
      .gpio_base        = -1, /* Dynamic allocation */
};
#endif

#if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE)
#include <linux/input/adxl34x.h>
static const struct adxl34x_platform_data adxl34x_info = {
      .x_axis_offset = 0,
      .y_axis_offset = 0,
      .z_axis_offset = 0,
      .tap_threshold = 0x31,
      .tap_duration = 0x10,
      .tap_latency = 0x60,
      .tap_window = 0xF0,
      .tap_axis_control = ADXL_TAP_X_EN | ADXL_TAP_Y_EN | ADXL_TAP_Z_EN,
      .act_axis_control = 0xFF,
      .activity_threshold = 5,
      .inactivity_threshold = 3,
      .inactivity_time = 4,
      .free_fall_threshold = 0x7,
      .free_fall_time = 0x20,
      .data_rate = 0x8,
      .data_range = ADXL_FULL_RES,

      .ev_type = EV_ABS,
      .ev_code_x = ABS_X,           /* EV_REL */
      .ev_code_y = ABS_Y,           /* EV_REL */
      .ev_code_z = ABS_Z,           /* EV_REL */

      .ev_code_tap = {BTN_TOUCH, BTN_TOUCH, BTN_TOUCH}, /* EV_KEY x,y,z */

/*    .ev_code_ff = KEY_F,*/        /* EV_KEY */
/*    .ev_code_act_inactivity = KEY_A,*/  /* EV_KEY */
      .power_mode = ADXL_AUTO_SLEEP | ADXL_LINK,
      .fifo_mode = ADXL_FIFO_STREAM,
      .orientation_enable = ADXL_EN_ORIENTATION_3D,
      .deadzone_angle = ADXL_DEADZONE_ANGLE_10p8,
      .divisor_length =  ADXL_LP_FILTER_DIVISOR_16,
      /* EV_KEY {+Z, +Y, +X, -X, -Y, -Z} */
      .ev_codes_orient_3d = {BTN_Z, BTN_Y, BTN_X, BTN_A, BTN_B, BTN_C},
};
#endif

#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
static struct bfin5xx_spi_chip spi_ad7879_chip_info = {
      .enable_dma = 0,
      .bits_per_word = 16,
};
#endif

#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
static struct bfin5xx_spi_chip spidev_chip_info = {
      .enable_dma = 0,
      .bits_per_word = 8,
};
#endif

#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
static struct bfin5xx_spi_chip lq035q1_spi_chip_info = {
      .enable_dma = 0,
      .bits_per_word    = 8,
};
#endif

#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
static struct bfin5xx_spi_chip enc28j60_spi_chip_info = {
      .enable_dma = 1,
      .bits_per_word    = 8,
};
#endif

#if defined(CONFIG_ADF702X) || defined(CONFIG_ADF702X_MODULE)
static struct bfin5xx_spi_chip adf7021_spi_chip_info = {
      .bits_per_word = 16,
};

#include <linux/spi/adf702x.h>
#define TXREG 0x0160A470
static const u32 adf7021_regs[] = {
      0x09608FA0,
      0x00575011,
      0x00A7F092,
      0x2B141563,
      0x81F29E94,
      0x00003155,
      0x050A4F66,
      0x00000007,
      0x00000008,
      0x000231E9,
      0x3296354A,
      0x891A2B3B,
      0x00000D9C,
      0x0000000D,
      0x0000000E,
      0x0000000F,
};

static struct adf702x_platform_data adf7021_platform_data = {
      .regs_base = (void *)SPORT1_TCR1,
      .dma_ch_rx = CH_SPORT1_RX,
      .dma_ch_tx = CH_SPORT1_TX,
      .irq_sport_err = IRQ_SPORT1_ERROR,
      .gpio_int_rfs = GPIO_PF8,
      .pin_req = {P_SPORT1_DTPRI, P_SPORT1_RFS, P_SPORT1_DRPRI,
                  P_SPORT1_RSCLK, P_SPORT1_TSCLK, 0},
      .adf702x_model = MODEL_ADF7021,
      .adf702x_regs = adf7021_regs,
      .tx_reg = TXREG,
};
static inline void adf702x_mac_init(void)
{
      random_ether_addr(adf7021_platform_data.mac_addr);
}
#else
static inline void adf702x_mac_init(void) {}
#endif

#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
#include <linux/spi/ads7846.h>
static struct bfin5xx_spi_chip ad7873_spi_chip_info = {
      .bits_per_word    = 8,
};

static int ads7873_get_pendown_state(void)
{
      return gpio_get_value(GPIO_PF6);
}

static struct ads7846_platform_data __initdata ad7873_pdata = {
      .model            = 7873,           /* AD7873 */
      .x_max            = 0xfff,
      .y_max            = 0xfff,
      .x_plate_ohms     = 620,
      .debounce_max     = 1,
      .debounce_rep     = 0,
      .debounce_tol     = (~0),
      .get_pendown_state = ads7873_get_pendown_state,
};
#endif

#if defined(CONFIG_MTD_DATAFLASH) \
      || defined(CONFIG_MTD_DATAFLASH_MODULE)

static struct mtd_partition bfin_spi_dataflash_partitions[] = {
      {
            .name = "bootloader(spi)",
            .size = 0x00040000,
            .offset = 0,
            .mask_flags = MTD_CAP_ROM
      }, {
            .name = "linux kernel(spi)",
            .size = 0x180000,
            .offset = MTDPART_OFS_APPEND,
      }, {
            .name = "file system(spi)",
            .size = MTDPART_SIZ_FULL,
            .offset = MTDPART_OFS_APPEND,
      }
};

static struct flash_platform_data bfin_spi_dataflash_data = {
      .name = "SPI Dataflash",
      .parts = bfin_spi_dataflash_partitions,
      .nr_parts = ARRAY_SIZE(bfin_spi_dataflash_partitions),
};

/* DataFlash chip */
static struct bfin5xx_spi_chip data_flash_chip_info = {
      .enable_dma = 0,         /* use dma transfer with this chip*/
      .bits_per_word = 8,
};
#endif

#if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE)
static struct bfin5xx_spi_chip spi_adxl34x_chip_info = {
      .enable_dma = 0,         /* use dma transfer with this chip*/
      .bits_per_word = 8,
};
#endif

#if defined(CONFIG_AD7476) || defined(CONFIG_AD7476_MODULE)
static struct bfin5xx_spi_chip spi_ad7476_chip_info = {
      .enable_dma = 0,         /* use dma transfer with this chip*/
      .bits_per_word = 8,
};
#endif

static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_MTD_M25P80) \
      || defined(CONFIG_MTD_M25P80_MODULE)
      {
            /* the modalias must be the same as spi device driver name */
            .modalias = "m25p80", /* Name of spi_driver for this device */
            .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
            .bus_num = 0, /* Framework bus number */
            .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
            .platform_data = &bfin_spi_flash_data,
            .controller_data = &spi_flash_chip_info,
            .mode = SPI_MODE_3,
      },
#endif
#if defined(CONFIG_MTD_DATAFLASH) \
      || defined(CONFIG_MTD_DATAFLASH_MODULE)
      {     /* DataFlash chip */
            .modalias = "mtd_dataflash",
            .max_speed_hz = 33250000,     /* max spi clock (SCK) speed in HZ */
            .bus_num = 0, /* Framework bus number */
            .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
            .platform_data = &bfin_spi_dataflash_data,
            .controller_data = &data_flash_chip_info,
            .mode = SPI_MODE_3,
      },
#endif
#if defined(CONFIG_BFIN_SPI_ADC) \
      || defined(CONFIG_BFIN_SPI_ADC_MODULE)
      {
            .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
            .max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
            .bus_num = 0, /* Framework bus number */
            .chip_select = 1, /* Framework chip select. */
            .platform_data = NULL, /* No spi_driver specific config */
            .controller_data = &spi_adc_chip_info,
      },
#endif

#if defined(CONFIG_SND_BF5XX_SOC_AD183X) \
      || defined(CONFIG_SND_BF5XX_SOC_AD183X_MODULE)
      {
            .modalias = "ad183x",
            .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
            .bus_num = 0,
            .chip_select = 4,
            .platform_data = "ad1836", /* only includes chip name for the moment */
            .controller_data = &ad1836_spi_chip_info,
            .mode = SPI_MODE_3,
      },
#endif

#if defined(CONFIG_SND_BF5XX_SOC_AD193X) || defined(CONFIG_SND_BF5XX_SOC_AD193X_MODULE)
      {
            .modalias = "ad193x",
            .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
            .bus_num = 0,
            .chip_select = 5,
            .controller_data = &ad1938_spi_chip_info,
            .mode = SPI_MODE_3,
      },
#endif

#if defined(CONFIG_SND_BF5XX_SOC_ADAV80X) || defined(CONFIG_SND_BF5XX_SOC_ADAV80X_MODULE)
      {
            .modalias = "adav80x",
            .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
            .bus_num = 0,
            .chip_select = 1,
            .controller_data = &adav801_spi_chip_info,
            .mode = SPI_MODE_3,
      },
#endif

#if defined(CONFIG_INPUT_AD714X_SPI) || defined(CONFIG_INPUT_AD714X_SPI_MODULE)
      {
            .modalias = "ad714x_captouch",
            .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
            .irq = IRQ_PF4,
            .bus_num = 0,
            .chip_select = 5,
            .mode = SPI_MODE_3,
            .platform_data = &ad7147_spi_platform_data,
            .controller_data = &ad7147_spi_chip_info,
      },
#endif

#if defined(CONFIG_AD2S90) || defined(CONFIG_AD2S90_MODULE)
      {
            .modalias = "ad2s90",
            .bus_num = 0,
            .chip_select = 3,            /* change it for your board */
            .mode = SPI_MODE_3,
            .platform_data = NULL,
            .controller_data = &ad2s90_spi_chip_info,
      },
#endif

#if defined(CONFIG_AD2S120X) || defined(CONFIG_AD2S120X_MODULE)
      {
            .modalias = "ad2s120x",
            .bus_num = 0,
            .chip_select = 4,            /* CS, change it for your board */
            .platform_data = ad2s120x_platform_data,
            .controller_data = &ad2s120x_spi_chip_info,
      },
#endif

#if defined(CONFIG_AD2S1210) || defined(CONFIG_AD2S1210_MODULE)
      {
            .modalias = "ad2s1210",
            .max_speed_hz = 8192000,
            .bus_num = 0,
            .chip_select = 4,            /* CS, change it for your board */
            .platform_data = ad2s1210_platform_data,
            .controller_data = &ad2s1210_spi_chip_info,
      },
#endif

#if defined(CONFIG_AD7314) || defined(CONFIG_AD7314_MODULE)
      {
            .modalias = "ad7314",
            .max_speed_hz = 1000000,
            .bus_num = 0,
            .chip_select = 4,            /* CS, change it for your board */
            .controller_data = &ad7314_spi_chip_info,
            .mode = SPI_MODE_1,
      },
#endif

#if defined(CONFIG_AD7816) || defined(CONFIG_AD7816_MODULE)
      {
            .modalias = "ad7818",
            .max_speed_hz = 1000000,
            .bus_num = 0,
            .chip_select = 4,            /* CS, change it for your board */
            .platform_data = ad7816_platform_data,
            .controller_data = &ad7816_spi_chip_info,
            .mode = SPI_MODE_3,
      },
#endif

#if defined(CONFIG_ADT7310) || defined(CONFIG_ADT7310_MODULE)
      {
            .modalias = "adt7310",
            .max_speed_hz = 1000000,
            .irq = IRQ_PG5,         /* CT alarm event. Line 0 */
            .bus_num = 0,
            .chip_select = 4, /* CS, change it for your board */
            .platform_data = adt7310_platform_data,
            .controller_data = &adt7310_spi_chip_info,
            .mode = SPI_MODE_3,
      },
#endif

#if defined(CONFIG_AD7298) || defined(CONFIG_AD7298_MODULE)
      {
            .modalias = "ad7298",
            .max_speed_hz = 1000000,
            .bus_num = 0,
            .chip_select = 4,            /* CS, change it for your board */
            .platform_data = ad7298_platform_data,
            .controller_data = &ad7298_spi_chip_info,
            .mode = SPI_MODE_3,
      },
#endif

#if defined(CONFIG_ADT7316_SPI) || defined(CONFIG_ADT7316_SPI_MODULE)
      {
            .modalias = "adt7316",
            .max_speed_hz = 1000000,
            .irq = IRQ_PG5,         /* interrupt line */
            .bus_num = 0,
            .chip_select = 4, /* CS, change it for your board */
            .platform_data = adt7316_spi_data,
            .controller_data = &adt7316_spi_chip_info,
            .mode = SPI_MODE_3,
      },
#endif

#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
      {
            .modalias = "mmc_spi",
            .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
            .bus_num = 0,
            .chip_select = 4,
            .platform_data = &bfin_mmc_spi_pdata,
            .controller_data = &mmc_spi_chip_info,
            .mode = SPI_MODE_3,
      },
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
      {
            .modalias         = "ad7877",
            .platform_data          = &bfin_ad7877_ts_info,
            .irq              = IRQ_PF6,
            .max_speed_hz     = 12500000,     /* max spi clock (SCK) speed in HZ */
            .bus_num    = 0,
            .chip_select  = 1,
            .controller_data = &spi_ad7877_chip_info,
      },
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE)
      {
            .modalias = "ad7879",
            .platform_data = &bfin_ad7879_ts_info,
            .irq = IRQ_PF7,
            .max_speed_hz = 5000000,     /* max spi clock (SCK) speed in HZ */
            .bus_num = 0,
            .chip_select = 1,
            .controller_data = &spi_ad7879_chip_info,
            .mode = SPI_CPHA | SPI_CPOL,
      },
#endif
#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
      {
            .modalias = "spidev",
            .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
            .bus_num = 0,
            .chip_select = 1,
            .controller_data = &spidev_chip_info,
      },
#endif
#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
      {
            .modalias = "bfin-lq035q1-spi",
            .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
            .bus_num = 0,
            .chip_select = 2,
            .controller_data = &lq035q1_spi_chip_info,
            .mode = SPI_CPHA | SPI_CPOL,
      },
#endif
#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
      {
            .modalias = "enc28j60",
            .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
            .irq = IRQ_PF6,
            .bus_num = 0,
            .chip_select = GPIO_PF10 + MAX_CTRL_CS,   /* GPIO controlled SSEL */
            .controller_data = &enc28j60_spi_chip_info,
            .mode = SPI_MODE_0,
      },
#endif
#if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE)
      {
            .modalias   = "adxl34x",
            .platform_data    = &adxl34x_info,
            .irq        = IRQ_PF6,
            .max_speed_hz     = 5000000,    /* max spi clock (SCK) speed in HZ */
            .bus_num    = 0,
            .chip_select      = 2,
            .controller_data = &spi_adxl34x_chip_info,
            .mode = SPI_MODE_3,
      },
#endif
#if defined(CONFIG_ADF702X) || defined(CONFIG_ADF702X_MODULE)
      {
            .modalias = "adf702x",
            .max_speed_hz = 16000000,     /* max spi clock (SCK) speed in HZ */
            .bus_num = 0,
            .chip_select = GPIO_PF10 + MAX_CTRL_CS,   /* GPIO controlled SSEL */
            .controller_data = &adf7021_spi_chip_info,
            .platform_data = &adf7021_platform_data,
            .mode = SPI_MODE_0,
      },
#endif
#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
      {
            .modalias = "ads7846",
            .max_speed_hz = 2000000,     /* max spi clock (SCK) speed in HZ */
            .bus_num = 0,
            .irq = IRQ_PF6,
            .chip_select = GPIO_PF10 + MAX_CTRL_CS,   /* GPIO controlled SSEL */
            .controller_data = &ad7873_spi_chip_info,
            .platform_data = &ad7873_pdata,
            .mode = SPI_MODE_0,
      },
#endif
#if defined(CONFIG_AD7476) \
      || defined(CONFIG_AD7476_MODULE)
      {
            .modalias = "ad7476", /* Name of spi_driver for this device */
            .max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
            .bus_num = 0, /* Framework bus number */
            .chip_select = 1, /* Framework chip select. */
            .platform_data = NULL, /* No spi_driver specific config */
            .controller_data = &spi_ad7476_chip_info,
            .mode = SPI_MODE_3,
      },
#endif
#if defined(CONFIG_ADE7753) \
      || defined(CONFIG_ADE7753_MODULE)
      {
            .modalias = "ade7753",
            .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
            .bus_num = 0,
            .chip_select = 1, /* CS, change it for your board */
            .platform_data = NULL, /* No spi_driver specific config */
            .mode = SPI_MODE_1,
      },
#endif
#if defined(CONFIG_ADE7754) \
      || defined(CONFIG_ADE7754_MODULE)
      {
            .modalias = "ade7754",
            .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
            .bus_num = 0,
            .chip_select = 1, /* CS, change it for your board */
            .platform_data = NULL, /* No spi_driver specific config */
            .mode = SPI_MODE_1,
      },
#endif
#if defined(CONFIG_ADE7758) \
      || defined(CONFIG_ADE7758_MODULE)
      {
            .modalias = "ade7758",
            .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
            .bus_num = 0,
            .chip_select = 1, /* CS, change it for your board */
            .platform_data = NULL, /* No spi_driver specific config */
            .mode = SPI_MODE_1,
      },
#endif
#if defined(CONFIG_ADE7759) \
      || defined(CONFIG_ADE7759_MODULE)
      {
            .modalias = "ade7759",
            .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
            .bus_num = 0,
            .chip_select = 1, /* CS, change it for your board */
            .platform_data = NULL, /* No spi_driver specific config */
            .mode = SPI_MODE_1,
      },
#endif
#if defined(CONFIG_ADE7854_SPI) \
      || defined(CONFIG_ADE7854_SPI_MODULE)
      {
            .modalias = "ade7854",
            .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
            .bus_num = 0,
            .chip_select = 1, /* CS, change it for your board */
            .platform_data = NULL, /* No spi_driver specific config */
            .mode = SPI_MODE_3,
      },
#endif
#if defined(CONFIG_ADIS16060) \
      || defined(CONFIG_ADIS16060_MODULE)
      {
            .modalias = "adis16060_r",
            .max_speed_hz = 2900000,     /* max spi clock (SCK) speed in HZ */
            .bus_num = 0,
            .chip_select = MAX_CTRL_CS + 1, /* CS for read, change it for your board */
            .platform_data = NULL, /* No spi_driver specific config */
            .mode = SPI_MODE_0,
      },
      {
            .modalias = "adis16060_w",
            .max_speed_hz = 2900000,     /* max spi clock (SCK) speed in HZ */
            .bus_num = 0,
            .chip_select = 2, /* CS for write, change it for your board */
            .platform_data = NULL, /* No spi_driver specific config */
            .mode = SPI_MODE_1,
      },
#endif
#if defined(CONFIG_ADIS16130) \
      || defined(CONFIG_ADIS16130_MODULE)
      {
            .modalias = "adis16130",
            .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
            .bus_num = 0,
            .chip_select = 1, /* CS for read, change it for your board */
            .platform_data = NULL, /* No spi_driver specific config */
            .mode = SPI_MODE_3,
      },
#endif
#if defined(CONFIG_ADIS16201) \
      || defined(CONFIG_ADIS16201_MODULE)
      {
            .modalias = "adis16201",
            .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
            .bus_num = 0,
            .chip_select = 5, /* CS, change it for your board */
            .platform_data = NULL, /* No spi_driver specific config */
            .mode = SPI_MODE_3,
            .irq = IRQ_PF4,
      },
#endif
#if defined(CONFIG_ADIS16203) \
      || defined(CONFIG_ADIS16203_MODULE)
      {
            .modalias = "adis16203",
            .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
            .bus_num = 0,
            .chip_select = 5, /* CS, change it for your board */
            .platform_data = NULL, /* No spi_driver specific config */
            .mode = SPI_MODE_3,
            .irq = IRQ_PF4,
      },
#endif
#if defined(CONFIG_ADIS16204) \
      || defined(CONFIG_ADIS16204_MODULE)
      {
            .modalias = "adis16204",
            .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
            .bus_num = 0,
            .chip_select = 5, /* CS, change it for your board */
            .platform_data = NULL, /* No spi_driver specific config */
            .mode = SPI_MODE_3,
            .irq = IRQ_PF4,
      },
#endif
#if defined(CONFIG_ADIS16209) \
      || defined(CONFIG_ADIS16209_MODULE)
      {
            .modalias = "adis16209",
            .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
            .bus_num = 0,
            .chip_select = 5, /* CS, change it for your board */
            .platform_data = NULL, /* No spi_driver specific config */
            .mode = SPI_MODE_3,
            .irq = IRQ_PF4,
      },
#endif
#if defined(CONFIG_ADIS16220) \
      || defined(CONFIG_ADIS16220_MODULE)
      {
            .modalias = "adis16220",
            .max_speed_hz = 2000000,     /* max spi clock (SCK) speed in HZ */
            .bus_num = 0,
            .chip_select = 5, /* CS, change it for your board */
            .platform_data = NULL, /* No spi_driver specific config */
            .mode = SPI_MODE_3,
            .irq = IRQ_PF4,
      },
#endif
#if defined(CONFIG_ADIS16240) \
      || defined(CONFIG_ADIS16240_MODULE)
      {
            .modalias = "adis16240",
            .max_speed_hz = 1500000,     /* max spi clock (SCK) speed in HZ */
            .bus_num = 0,
            .chip_select = 5, /* CS, change it for your board */
            .platform_data = NULL, /* No spi_driver specific config */
            .mode = SPI_MODE_3,
            .irq = IRQ_PF4,
      },
#endif
#if defined(CONFIG_ADIS16260) \
      || defined(CONFIG_ADIS16260_MODULE)
      {
            .modalias = "adis16260",
            .max_speed_hz = 1500000,     /* max spi clock (SCK) speed in HZ */
            .bus_num = 0,
            .chip_select = 5, /* CS, change it for your board */
            .platform_data = NULL, /* No spi_driver specific config */
            .mode = SPI_MODE_3,
            .irq = IRQ_PF4,
      },
#endif
#if defined(CONFIG_ADIS16261) \
      || defined(CONFIG_ADIS16261_MODULE)
      {
            .modalias = "adis16261",
            .max_speed_hz = 2500000,     /* max spi clock (SCK) speed in HZ */
            .bus_num = 0,
            .chip_select = 1, /* CS, change it for your board */
            .platform_data = NULL, /* No spi_driver specific config */
            .mode = SPI_MODE_3,
      },
#endif
#if defined(CONFIG_ADIS16300) \
      || defined(CONFIG_ADIS16300_MODULE)
      {
            .modalias = "adis16300",
            .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
            .bus_num = 0,
            .chip_select = 5, /* CS, change it for your board */
            .platform_data = NULL, /* No spi_driver specific config */
            .mode = SPI_MODE_3,
            .irq = IRQ_PF4,
      },
#endif
#if defined(CONFIG_ADIS16350) \
      || defined(CONFIG_ADIS16350_MODULE)
      {
            .modalias = "adis16364",
            .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
            .bus_num = 0,
            .chip_select = 5, /* CS, change it for your board */
            .platform_data = NULL, /* No spi_driver specific config */
            .mode = SPI_MODE_3,
            .irq = IRQ_PF4,
      },
#endif
#if defined(CONFIG_ADIS16400) \
      || defined(CONFIG_ADIS16400_MODULE)
      {
            .modalias = "adis16400",
            .max_speed_hz = 1000000,     /* max spi clock (SCK) speed in HZ */
            .bus_num = 0,
            .chip_select = 1, /* CS, change it for your board */
            .platform_data = NULL, /* No spi_driver specific config */
            .mode = SPI_MODE_3,
      },
#endif
};

#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* SPI controller data */
static struct bfin5xx_spi_master bfin_spi0_info = {
      .num_chipselect = MAX_CTRL_CS + MAX_BLACKFIN_GPIOS,
      .enable_dma = 1,  /* master has the ability to do dma transfer */
      .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
};

/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
      [0] = {
            .start = SPI0_REGBASE,
            .end   = SPI0_REGBASE + 0xFF,
            .flags = IORESOURCE_MEM,
            },
      [1] = {
            .start = CH_SPI,
            .end   = CH_SPI,
            .flags = IORESOURCE_DMA,
      },
      [2] = {
            .start = IRQ_SPI,
            .end   = IRQ_SPI,
            .flags = IORESOURCE_IRQ,
      },
};

static struct platform_device bfin_spi0_device = {
      .name = "bfin-spi",
      .id = 0, /* Bus number */
      .num_resources = ARRAY_SIZE(bfin_spi0_resource),
      .resource = bfin_spi0_resource,
      .dev = {
            .platform_data = &bfin_spi0_info, /* Passed to driver */
      },
};
#endif  /* spi master and devices */

#if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE)

/* SPORT SPI controller data */
static struct bfin5xx_spi_master bfin_sport_spi0_info = {
      .num_chipselect = 1, /* master only supports one device */
      .enable_dma = 0,  /* master don't support DMA */
      .pin_req = {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_DRPRI,
            P_SPORT0_RSCLK, P_SPORT0_TFS, P_SPORT0_RFS, 0},
};

static struct resource bfin_sport_spi0_resource[] = {
      [0] = {
            .start = SPORT0_TCR1,
            .end   = SPORT0_TCR1 + 0xFF,
            .flags = IORESOURCE_MEM,
            },
      [1] = {
            .start = IRQ_SPORT0_ERROR,
            .end   = IRQ_SPORT0_ERROR,
            .flags = IORESOURCE_IRQ,
            },
};

static struct platform_device bfin_sport_spi0_device = {
      .name = "bfin-sport-spi",
      .id = 1, /* Bus number */
      .num_resources = ARRAY_SIZE(bfin_sport_spi0_resource),
      .resource = bfin_sport_spi0_resource,
      .dev = {
            .platform_data = &bfin_sport_spi0_info, /* Passed to driver */
      },
};

static struct bfin5xx_spi_master bfin_sport_spi1_info = {
      .num_chipselect = 1, /* master only supports one device */
      .enable_dma = 0,  /* master don't support DMA */
      .pin_req = {P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_DRPRI,
            P_SPORT1_RSCLK, P_SPORT1_TFS, P_SPORT1_RFS, 0},
};

static struct resource bfin_sport_spi1_resource[] = {
      [0] = {
            .start = SPORT1_TCR1,
            .end   = SPORT1_TCR1 + 0xFF,
            .flags = IORESOURCE_MEM,
            },
      [1] = {
            .start = IRQ_SPORT1_ERROR,
            .end   = IRQ_SPORT1_ERROR,
            .flags = IORESOURCE_IRQ,
            },
};

static struct platform_device bfin_sport_spi1_device = {
      .name = "bfin-sport-spi",
      .id = 2, /* Bus number */
      .num_resources = ARRAY_SIZE(bfin_sport_spi1_resource),
      .resource = bfin_sport_spi1_resource,
      .dev = {
            .platform_data = &bfin_sport_spi1_info, /* Passed to driver */
      },
};

#endif  /* sport spi master and devices */

#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
static struct platform_device bfin_fb_device = {
      .name = "bf537-lq035",
};
#endif

#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
#include <asm/bfin-lq035q1.h>

static struct bfin_lq035q1fb_disp_info bfin_lq035q1_data = {
      .mode = LQ035_NORM | LQ035_RGB | LQ035_RL | LQ035_TB,
      .ppi_mode = USE_RGB565_16_BIT_PPI,
      .use_bl = 0,      /* let something else control the LCD Blacklight */
      .gpio_bl = GPIO_PF7,
};

static struct resource bfin_lq035q1_resources[] = {
      {
            .start = IRQ_PPI_ERROR,
            .end = IRQ_PPI_ERROR,
            .flags = IORESOURCE_IRQ,
      },
};

static struct platform_device bfin_lq035q1_device = {
      .name       = "bfin-lq035q1",
      .id         = -1,
      .num_resources    = ARRAY_SIZE(bfin_lq035q1_resources),
      .resource   = bfin_lq035q1_resources,
      .dev        = {
            .platform_data = &bfin_lq035q1_data,
      },
};
#endif

#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#ifdef CONFIG_SERIAL_BFIN_UART0
static struct resource bfin_uart0_resources[] = {
      {
            .start = UART0_THR,
            .end = UART0_GCTL+2,
            .flags = IORESOURCE_MEM,
      },
      {
            .start = IRQ_UART0_RX,
            .end = IRQ_UART0_RX+1,
            .flags = IORESOURCE_IRQ,
      },
      {
            .start = IRQ_UART0_ERROR,
            .end = IRQ_UART0_ERROR,
            .flags = IORESOURCE_IRQ,
      },
      {
            .start = CH_UART0_TX,
            .end = CH_UART0_TX,
            .flags = IORESOURCE_DMA,
      },
      {
            .start = CH_UART0_RX,
            .end = CH_UART0_RX,
            .flags = IORESOURCE_DMA,
      },
#ifdef CONFIG_BFIN_UART0_CTSRTS
      {     /* CTS pin */
            .start = GPIO_PG7,
            .end = GPIO_PG7,
            .flags = IORESOURCE_IO,
      },
      {     /* RTS pin */
            .start = GPIO_PG6,
            .end = GPIO_PG6,
            .flags = IORESOURCE_IO,
      },
#endif
};

static unsigned short bfin_uart0_peripherals[] = {
      P_UART0_TX, P_UART0_RX, 0
};

static struct platform_device bfin_uart0_device = {
      .name = "bfin-uart",
      .id = 0,
      .num_resources = ARRAY_SIZE(bfin_uart0_resources),
      .resource = bfin_uart0_resources,
      .dev = {
            .platform_data = &bfin_uart0_peripherals, /* Passed to driver */
      },
};
#endif
#ifdef CONFIG_SERIAL_BFIN_UART1
static struct resource bfin_uart1_resources[] = {
      {
            .start = UART1_THR,
            .end = UART1_GCTL+2,
            .flags = IORESOURCE_MEM,
      },
      {
            .start = IRQ_UART1_RX,
            .end = IRQ_UART1_RX+1,
            .flags = IORESOURCE_IRQ,
      },
      {
            .start = IRQ_UART1_ERROR,
            .end = IRQ_UART1_ERROR,
            .flags = IORESOURCE_IRQ,
      },
      {
            .start = CH_UART1_TX,
            .end = CH_UART1_TX,
            .flags = IORESOURCE_DMA,
      },
      {
            .start = CH_UART1_RX,
            .end = CH_UART1_RX,
            .flags = IORESOURCE_DMA,
      },
};

static unsigned short bfin_uart1_peripherals[] = {
      P_UART1_TX, P_UART1_RX, 0
};

static struct platform_device bfin_uart1_device = {
      .name = "bfin-uart",
      .id = 1,
      .num_resources = ARRAY_SIZE(bfin_uart1_resources),
      .resource = bfin_uart1_resources,
      .dev = {
            .platform_data = &bfin_uart1_peripherals, /* Passed to driver */
      },
};
#endif
#endif

#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#ifdef CONFIG_BFIN_SIR0
static struct resource bfin_sir0_resources[] = {
      {
            .start = 0xFFC00400,
            .end = 0xFFC004FF,
            .flags = IORESOURCE_MEM,
      },
      {
            .start = IRQ_UART0_RX,
            .end = IRQ_UART0_RX+1,
            .flags = IORESOURCE_IRQ,
      },
      {
            .start = CH_UART0_RX,
            .end = CH_UART0_RX+1,
            .flags = IORESOURCE_DMA,
      },
};

static struct platform_device bfin_sir0_device = {
      .name = "bfin_sir",
      .id = 0,
      .num_resources = ARRAY_SIZE(bfin_sir0_resources),
      .resource = bfin_sir0_resources,
};
#endif
#ifdef CONFIG_BFIN_SIR1
static struct resource bfin_sir1_resources[] = {
      {
            .start = 0xFFC02000,
            .end = 0xFFC020FF,
            .flags = IORESOURCE_MEM,
      },
      {
            .start = IRQ_UART1_RX,
            .end = IRQ_UART1_RX+1,
            .flags = IORESOURCE_IRQ,
      },
      {
            .start = CH_UART1_RX,
            .end = CH_UART1_RX+1,
            .flags = IORESOURCE_DMA,
      },
};

static struct platform_device bfin_sir1_device = {
      .name = "bfin_sir",
      .id = 1,
      .num_resources = ARRAY_SIZE(bfin_sir1_resources),
      .resource = bfin_sir1_resources,
};
#endif
#endif

#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
static struct resource bfin_twi0_resource[] = {
      [0] = {
            .start = TWI0_REGBASE,
            .end   = TWI0_REGBASE,
            .flags = IORESOURCE_MEM,
      },
      [1] = {
            .start = IRQ_TWI,
            .end   = IRQ_TWI,
            .flags = IORESOURCE_IRQ,
      },
};

static struct platform_device i2c_bfin_twi_device = {
      .name = "i2c-bfin-twi",
      .id = 0,
      .num_resources = ARRAY_SIZE(bfin_twi0_resource),
      .resource = bfin_twi0_resource,
};
#endif

#if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE)
static const unsigned short adp5588_keymap[ADP5588_KEYMAPSIZE] = {
      [0]    = KEY_GRAVE,
      [1]    = KEY_1,
      [2]    = KEY_2,
      [3]    = KEY_3,
      [4]    = KEY_4,
      [5]    = KEY_5,
      [6]    = KEY_6,
      [7]    = KEY_7,
      [8]    = KEY_8,
      [9]    = KEY_9,
      [10]   = KEY_0,
      [11]   = KEY_MINUS,
      [12]   = KEY_EQUAL,
      [13]   = KEY_BACKSLASH,
      [15]   = KEY_KP0,
      [16]   = KEY_Q,
      [17]   = KEY_W,
      [18]   = KEY_E,
      [19]   = KEY_R,
      [20]   = KEY_T,
      [21]   = KEY_Y,
      [22]   = KEY_U,
      [23]   = KEY_I,
      [24]   = KEY_O,
      [25]   = KEY_P,
      [26]   = KEY_LEFTBRACE,
      [27]   = KEY_RIGHTBRACE,
      [29]   = KEY_KP1,
      [30]   = KEY_KP2,
      [31]   = KEY_KP3,
      [32]   = KEY_A,
      [33]   = KEY_S,
      [34]   = KEY_D,
      [35]   = KEY_F,
      [36]   = KEY_G,
      [37]   = KEY_H,
      [38]   = KEY_J,
      [39]   = KEY_K,
      [40]   = KEY_L,
      [41]   = KEY_SEMICOLON,
      [42]   = KEY_APOSTROPHE,
      [43]   = KEY_BACKSLASH,
      [45]   = KEY_KP4,
      [46]   = KEY_KP5,
      [47]   = KEY_KP6,
      [48]   = KEY_102ND,
      [49]   = KEY_Z,
      [50]   = KEY_X,
      [51]   = KEY_C,
      [52]   = KEY_V,
      [53]   = KEY_B,
      [54]   = KEY_N,
      [55]   = KEY_M,
      [56]   = KEY_COMMA,
      [57]   = KEY_DOT,
      [58]   = KEY_SLASH,
      [60]   = KEY_KPDOT,
      [61]   = KEY_KP7,
      [62]   = KEY_KP8,
      [63]   = KEY_KP9,
      [64]   = KEY_SPACE,
      [65]   = KEY_BACKSPACE,
      [66]   = KEY_TAB,
      [67]   = KEY_KPENTER,
      [68]   = KEY_ENTER,
      [69]   = KEY_ESC,
      [70]   = KEY_DELETE,
      [74]   = KEY_KPMINUS,
      [76]   = KEY_UP,
      [77]   = KEY_DOWN,
      [78]   = KEY_RIGHT,
      [79]   = KEY_LEFT,
};

static struct adp5588_kpad_platform_data adp5588_kpad_data = {
      .rows       = 8,
      .cols       = 10,
      .keymap           = adp5588_keymap,
      .keymapsize = ARRAY_SIZE(adp5588_keymap),
      .repeat           = 0,
};
#endif

#if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
#include <linux/mfd/adp5520.h>

      /*
       *  ADP5520/5501 Backlight Data
       */

static struct adp5520_backlight_platform_data adp5520_backlight_data = {
      .fade_in          = ADP5520_FADE_T_1200ms,
      .fade_out         = ADP5520_FADE_T_1200ms,
      .fade_led_law           = ADP5520_BL_LAW_LINEAR,
      .en_ambl_sens           = 1,
      .abml_filt        = ADP5520_BL_AMBL_FILT_640ms,
      .l1_daylight_max  = ADP5520_BL_CUR_mA(15),
      .l1_daylight_dim  = ADP5520_BL_CUR_mA(0),
      .l2_office_max          = ADP5520_BL_CUR_mA(7),
      .l2_office_dim          = ADP5520_BL_CUR_mA(0),
      .l3_dark_max            = ADP5520_BL_CUR_mA(3),
      .l3_dark_dim            = ADP5520_BL_CUR_mA(0),
      .l2_trip          = ADP5520_L2_COMP_CURR_uA(700),
      .l2_hyst          = ADP5520_L2_COMP_CURR_uA(50),
      .l3_trip          = ADP5520_L3_COMP_CURR_uA(80),
      .l3_hyst          = ADP5520_L3_COMP_CURR_uA(20),
};

      /*
       *  ADP5520/5501 LEDs Data
       */

static struct led_info adp5520_leds[] = {
      {
            .name = "adp5520-led1",
            .default_trigger = "none",
            .flags = FLAG_ID_ADP5520_LED1_ADP5501_LED0 | ADP5520_LED_OFFT_600ms,
      },
#ifdef ADP5520_EN_ALL_LEDS
      {
            .name = "adp5520-led2",
            .default_trigger = "none",
            .flags = FLAG_ID_ADP5520_LED2_ADP5501_LED1,
      },
      {
            .name = "adp5520-led3",
            .default_trigger = "none",
            .flags = FLAG_ID_ADP5520_LED3_ADP5501_LED2,
      },
#endif
};

static struct adp5520_leds_platform_data adp5520_leds_data = {
      .num_leds = ARRAY_SIZE(adp5520_leds),
      .leds = adp5520_leds,
      .fade_in = ADP5520_FADE_T_600ms,
      .fade_out = ADP5520_FADE_T_600ms,
      .led_on_time = ADP5520_LED_ONT_600ms,
};

      /*
       *  ADP5520 GPIO Data
       */

static struct adp5520_gpio_platform_data adp5520_gpio_data = {
      .gpio_start = 50,
      .gpio_en_mask = ADP5520_GPIO_C1 | ADP5520_GPIO_C2 | ADP5520_GPIO_R2,
      .gpio_pullup_mask = ADP5520_GPIO_C1 | ADP5520_GPIO_C2 | ADP5520_GPIO_R2,
};

      /*
       *  ADP5520 Keypad Data
       */

static const unsigned short adp5520_keymap[ADP5520_KEYMAPSIZE] = {
      [ADP5520_KEY(0, 0)]     = KEY_GRAVE,
      [ADP5520_KEY(0, 1)]     = KEY_1,
      [ADP5520_KEY(0, 2)]     = KEY_2,
      [ADP5520_KEY(0, 3)]     = KEY_3,
      [ADP5520_KEY(1, 0)]     = KEY_4,
      [ADP5520_KEY(1, 1)]     = KEY_5,
      [ADP5520_KEY(1, 2)]     = KEY_6,
      [ADP5520_KEY(1, 3)]     = KEY_7,
      [ADP5520_KEY(2, 0)]     = KEY_8,
      [ADP5520_KEY(2, 1)]     = KEY_9,
      [ADP5520_KEY(2, 2)]     = KEY_0,
      [ADP5520_KEY(2, 3)]     = KEY_MINUS,
      [ADP5520_KEY(3, 0)]     = KEY_EQUAL,
      [ADP5520_KEY(3, 1)]     = KEY_BACKSLASH,
      [ADP5520_KEY(3, 2)]     = KEY_BACKSPACE,
      [ADP5520_KEY(3, 3)]     = KEY_ENTER,
};

static struct adp5520_keys_platform_data adp5520_keys_data = {
      .rows_en_mask     = ADP5520_ROW_R3 | ADP5520_ROW_R2 | ADP5520_ROW_R1 | ADP5520_ROW_R0,
      .cols_en_mask     = ADP5520_COL_C3 | ADP5520_COL_C2 | ADP5520_COL_C1 | ADP5520_COL_C0,
      .keymap           = adp5520_keymap,
      .keymapsize = ARRAY_SIZE(adp5520_keymap),
      .repeat           = 0,
};

      /*
       *  ADP5520/5501 Multifunction Device Init Data
       */

static struct adp5520_platform_data adp5520_pdev_data = {
      .backlight = &adp5520_backlight_data,
      .leds = &adp5520_leds_data,
      .gpio = &adp5520_gpio_data,
      .keys = &adp5520_keys_data,
};

#endif

#if defined(CONFIG_GPIO_ADP5588) || defined(CONFIG_GPIO_ADP5588_MODULE)
static struct adp5588_gpio_platform_data adp5588_gpio_data = {
      .gpio_start = 50,
      .pullup_dis_mask = 0,
};
#endif

#if defined(CONFIG_BACKLIGHT_ADP8870) || defined(CONFIG_BACKLIGHT_ADP8870_MODULE)
#include <linux/i2c/adp8870.h>
static struct led_info adp8870_leds[] = {
      {
            .name = "adp8870-led7",
            .default_trigger = "none",
            .flags = ADP8870_LED_D7 | ADP8870_LED_OFFT_600ms,
      },
};


static struct adp8870_backlight_platform_data adp8870_pdata = {
      .bl_led_assign = ADP8870_BL_D1 | ADP8870_BL_D2 | ADP8870_BL_D3 |
                   ADP8870_BL_D4 | ADP8870_BL_D5 | ADP8870_BL_D6, /* 1 = Backlight 0 = Individual LED */
      .pwm_assign = 0,                    /* 1 = Enables PWM mode */

      .bl_fade_in = ADP8870_FADE_T_1200ms,            /* Backlight Fade-In Timer */
      .bl_fade_out = ADP8870_FADE_T_1200ms,           /* Backlight Fade-Out Timer */
      .bl_fade_law = ADP8870_FADE_LAW_CUBIC1,         /* fade-on/fade-off transfer characteristic */

      .en_ambl_sens = 1,                        /* 1 = enable ambient light sensor */
      .abml_filt = ADP8870_BL_AMBL_FILT_320ms,  /* Light sensor filter time */

      .l1_daylight_max = ADP8870_BL_CUR_mA(20), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
      .l1_daylight_dim = ADP8870_BL_CUR_mA(0),  /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
      .l2_bright_max = ADP8870_BL_CUR_mA(14),         /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
      .l2_bright_dim = ADP8870_BL_CUR_mA(0),          /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
      .l3_office_max = ADP8870_BL_CUR_mA(6),          /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
      .l3_office_dim = ADP8870_BL_CUR_mA(0),          /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
      .l4_indoor_max = ADP8870_BL_CUR_mA(3),          /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
      .l4_indor_dim = ADP8870_BL_CUR_mA(0),           /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
      .l5_dark_max = ADP8870_BL_CUR_mA(2),            /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
      .l5_dark_dim = ADP8870_BL_CUR_mA(0),            /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */

      .l2_trip = ADP8870_L2_COMP_CURR_uA(710),  /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
      .l2_hyst = ADP8870_L2_COMP_CURR_uA(73),         /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
      .l3_trip = ADP8870_L3_COMP_CURR_uA(389),  /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */
      .l3_hyst = ADP8870_L3_COMP_CURR_uA(54),         /* use L3_COMP_CURR_uA(I) 0 <= I <= 551 uA */
      .l4_trip = ADP8870_L4_COMP_CURR_uA(167),  /* use L4_COMP_CURR_uA(I) 0 <= I <= 275 uA */
      .l4_hyst = ADP8870_L4_COMP_CURR_uA(16),         /* use L4_COMP_CURR_uA(I) 0 <= I <= 275 uA */
      .l5_trip = ADP8870_L5_COMP_CURR_uA(43),         /* use L5_COMP_CURR_uA(I) 0 <= I <= 138 uA */
      .l5_hyst = ADP8870_L5_COMP_CURR_uA(11),         /* use L6_COMP_CURR_uA(I) 0 <= I <= 138 uA */

      .leds = adp8870_leds,
      .num_leds = ARRAY_SIZE(adp8870_leds),
      .led_fade_law = ADP8870_FADE_LAW_SQUARE,  /* fade-on/fade-off transfer characteristic */
      .led_fade_in = ADP8870_FADE_T_600ms,
      .led_fade_out = ADP8870_FADE_T_600ms,
      .led_on_time = ADP8870_LED_ONT_200ms,
};
#endif

#if defined(CONFIG_BACKLIGHT_ADP8860) || defined(CONFIG_BACKLIGHT_ADP8860_MODULE)
#include <linux/i2c/adp8860.h>
static struct led_info adp8860_leds[] = {
      {
            .name = "adp8860-led7",
            .default_trigger = "none",
            .flags = ADP8860_LED_D7 | ADP8860_LED_OFFT_600ms,
      },
};

static struct adp8860_backlight_platform_data adp8860_pdata = {
      .bl_led_assign = ADP8860_BL_D1 | ADP8860_BL_D2 | ADP8860_BL_D3 |
                   ADP8860_BL_D4 | ADP8860_BL_D5 | ADP8860_BL_D6, /* 1 = Backlight 0 = Individual LED */

      .bl_fade_in = ADP8860_FADE_T_1200ms,            /* Backlight Fade-In Timer */
      .bl_fade_out = ADP8860_FADE_T_1200ms,           /* Backlight Fade-Out Timer */
      .bl_fade_law = ADP8860_FADE_LAW_CUBIC1,         /* fade-on/fade-off transfer characteristic */

      .en_ambl_sens = 1,                        /* 1 = enable ambient light sensor */
      .abml_filt = ADP8860_BL_AMBL_FILT_320ms,  /* Light sensor filter time */

      .l1_daylight_max = ADP8860_BL_CUR_mA(20), /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
      .l1_daylight_dim = ADP8860_BL_CUR_mA(0),  /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
      .l2_office_max = ADP8860_BL_CUR_mA(6),          /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
      .l2_office_dim = ADP8860_BL_CUR_mA(0),          /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */
      .l3_dark_max = ADP8860_BL_CUR_mA(2),            /* use BL_CUR_mA(I) 0 <= I <= 30 mA */
      .l3_dark_dim = ADP8860_BL_CUR_mA(0),            /* typ = 0, use BL_CUR_mA(I) 0 <= I <= 30 mA */

      .l2_trip = ADP8860_L2_COMP_CURR_uA(710),  /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
      .l2_hyst = ADP8860_L2_COMP_CURR_uA(73),         /* use L2_COMP_CURR_uA(I) 0 <= I <= 1106 uA */
      .l3_trip = ADP8860_L3_COMP_CURR_uA(43),         /* use L3_COMP_CURR_uA(I) 0 <= I <= 138 uA */
      .l3_hyst = ADP8860_L3_COMP_CURR_uA(11),         /* use L3_COMP_CURR_uA(I) 0 <= I <= 138 uA */

      .leds = adp8860_leds,
      .num_leds = ARRAY_SIZE(adp8860_leds),
      .led_fade_law = ADP8860_FADE_LAW_SQUARE,  /* fade-on/fade-off transfer characteristic */
      .led_fade_in = ADP8860_FADE_T_600ms,
      .led_fade_out = ADP8860_FADE_T_600ms,
      .led_on_time = ADP8860_LED_ONT_200ms,
};
#endif

#if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE)
static struct regulator_consumer_supply ad5398_consumer = {
      .supply = "current",
};

static struct regulator_init_data ad5398_regulator_data = {
      .constraints = {
            .name = "current range",
            .max_uA = 120000,
            .valid_ops_mask = REGULATOR_CHANGE_CURRENT | REGULATOR_CHANGE_STATUS,
      },
      .num_consumer_supplies = 1,
      .consumer_supplies     = &ad5398_consumer,
};

#if defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER) || \
      defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER_MODULE)
static struct platform_device ad5398_virt_consumer_device = {
      .name = "reg-virt-consumer",
      .id = 0,
      .dev = {
            .platform_data = "current", /* Passed to driver */
      },
};
#endif
#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
      defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
static struct regulator_bulk_data ad5398_bulk_data = {
      .supply = "current",
};

static struct regulator_userspace_consumer_data ad5398_userspace_comsumer_data = {
      .name = "ad5398",
      .num_supplies = 1,
      .supplies = &ad5398_bulk_data,
};

static struct platform_device ad5398_userspace_consumer_device = {
      .name = "reg-userspace-consumer",
      .id = 0,
      .dev = {
            .platform_data = &ad5398_userspace_comsumer_data,
      },
};
#endif
#endif

#if defined(CONFIG_ADT7410) || defined(CONFIG_ADT7410_MODULE)
/* INT bound temperature alarm event. line 1 */
static unsigned long adt7410_platform_data[2] = {
      IRQ_PG4, IRQF_TRIGGER_LOW,
};
#endif

#if defined(CONFIG_ADT7316_I2C) || defined(CONFIG_ADT7316_I2C_MODULE)
/* INT bound temperature alarm event. line 1 */
static unsigned long adt7316_i2c_data[2] = {
      IRQF_TRIGGER_LOW, /* interrupt flags */
      GPIO_PF4, /* ldac_pin, 0 means DAC/LDAC registers control DAC update */
};
#endif

static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
#if defined(CONFIG_SND_BF5XX_SOC_AD193X) || defined(CONFIG_SND_BF5XX_SOC_AD193X_MODULE)
      {
            I2C_BOARD_INFO("ad1937", 0x04),
      },
#endif

#if defined(CONFIG_SND_BF5XX_SOC_ADAV80X) || defined(CONFIG_SND_BF5XX_SOC_ADAV80X_MODULE)
      {
            I2C_BOARD_INFO("adav803", 0x10),
      },
#endif

#if defined(CONFIG_INPUT_AD714X_I2C) || defined(CONFIG_INPUT_AD714X_I2C_MODULE)
      {
            I2C_BOARD_INFO("ad7142_captouch", 0x2C),
            .irq = IRQ_PG5,
            .platform_data = (void *)&ad7142_i2c_platform_data,
      },
#endif

#if defined(CONFIG_AD7150) || defined(CONFIG_AD7150_MODULE)
      {
            I2C_BOARD_INFO("ad7150", 0x48),
            .irq = IRQ_PG5, /* fixme: use real interrupt number */
      },
#endif

#if defined(CONFIG_AD7152) || defined(CONFIG_AD7152_MODULE)
      {
            I2C_BOARD_INFO("ad7152", 0x48),
      },
#endif

#if defined(CONFIG_AD774X) || defined(CONFIG_AD774X_MODULE)
      {
            I2C_BOARD_INFO("ad774x", 0x48),
      },
#endif

#if defined(CONFIG_AD7414) || defined(CONFIG_AD7414_MODULE)
      {
            I2C_BOARD_INFO("ad7414", 0x9),
            .irq = IRQ_PG5,
            .irq_flags = IRQF_TRIGGER_LOW,
      },
#endif

#if defined(CONFIG_AD7416) || defined(CONFIG_AD7416_MODULE)
      {
            I2C_BOARD_INFO("ad7417", 0xb),
            .irq = IRQ_PG5,
            .irq_flags = IRQF_TRIGGER_LOW,
            .platform_data = (void *)GPIO_PF4,
      },
#endif

#if defined(CONFIG_ADE7854_I2C) || defined(CONFIG_ADE7854_I2C_MODULE)
      {
            I2C_BOARD_INFO("ade7854", 0x38),
      },
#endif

#if defined(CONFIG_ADT75) || defined(CONFIG_ADT75_MODULE)
      {
            I2C_BOARD_INFO("adt75", 0x9),
            .irq = IRQ_PG5,
            .irq_flags = IRQF_TRIGGER_LOW,
      },
#endif

#if defined(CONFIG_ADT7408) || defined(CONFIG_ADT7408_MODULE)
      {
            I2C_BOARD_INFO("adt7408", 0x18),
            .irq = IRQ_PG5,
            .irq_flags = IRQF_TRIGGER_LOW,
      },
#endif

#if defined(CONFIG_ADT7410) || defined(CONFIG_ADT7410_MODULE)
      {
            I2C_BOARD_INFO("adt7410", 0x48),
            /* CT critical temperature event. line 0 */
            .irq = IRQ_PG5,
            .irq_flags = IRQF_TRIGGER_LOW,
            .platform_data = (void *)&adt7410_platform_data,
      },
#endif

#if defined(CONFIG_AD7291) || defined(CONFIG_AD7291_MODULE)
      {
            I2C_BOARD_INFO("ad7291", 0x20),
            .irq = IRQ_PG5,
            .irq_flags = IRQF_TRIGGER_LOW,
      },
#endif

#if defined(CONFIG_ADT7316_I2C) || defined(CONFIG_ADT7316_I2C_MODULE)
      {
            I2C_BOARD_INFO("adt7316", 0x48),
            .irq = IRQ_PG6,
            .platform_data = (void *)&adt7316_i2c_data,
      },
#endif

#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
      {
            I2C_BOARD_INFO("pcf8574_lcd", 0x22),
      },
#endif
#if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE)
      {
            I2C_BOARD_INFO("pcf8574_keypad", 0x27),
            .irq = IRQ_PG6,
      },
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE)
      {
            I2C_BOARD_INFO("ad7879", 0x2F),
            .irq = IRQ_PG5,
            .platform_data = (void *)&bfin_ad7879_ts_info,
      },
#endif
#if defined(CONFIG_KEYBOARD_ADP5588) || defined(CONFIG_KEYBOARD_ADP5588_MODULE)
      {
            I2C_BOARD_INFO("adp5588-keys", 0x34),
            .irq = IRQ_PG0,
            .platform_data = (void *)&adp5588_kpad_data,
      },
#endif
#if defined(CONFIG_PMIC_ADP5520) || defined(CONFIG_PMIC_ADP5520_MODULE)
      {
            I2C_BOARD_INFO("pmic-adp5520", 0x32),
            .irq = IRQ_PG0,
            .platform_data = (void *)&adp5520_pdev_data,
      },
#endif
#if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE)
      {
            I2C_BOARD_INFO("adxl34x", 0x53),
            .irq = IRQ_PG3,
            .platform_data = (void *)&adxl34x_info,
      },
#endif
#if defined(CONFIG_GPIO_ADP5588) || defined(CONFIG_GPIO_ADP5588_MODULE)
      {
            I2C_BOARD_INFO("adp5588-gpio", 0x34),
            .platform_data = (void *)&adp5588_gpio_data,
      },
#endif
#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
      {
            I2C_BOARD_INFO("bfin-adv7393", 0x2B),
      },
#endif
#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
      {
            I2C_BOARD_INFO("bf537-lq035-ad5280", 0x2F),
      },
#endif
#if defined(CONFIG_BACKLIGHT_ADP8870) || defined(CONFIG_BACKLIGHT_ADP8870_MODULE)
      {
            I2C_BOARD_INFO("adp8870", 0x2B),
            .platform_data = (void *)&adp8870_pdata,
      },
#endif
#if defined(CONFIG_SND_SOC_ADAU1371) || defined(CONFIG_SND_SOC_ADAU1371_MODULE)
      {
            I2C_BOARD_INFO("adau1371", 0x1A),
      },
#endif
#if defined(CONFIG_SND_SOC_ADAU1761) || defined(CONFIG_SND_SOC_ADAU1761_MODULE)
      {
            I2C_BOARD_INFO("adau1761", 0x38),
      },
#endif
#if defined(CONFIG_SND_SOC_ADAU1361) || defined(CONFIG_SND_SOC_ADAU1361_MODULE)
      {
            I2C_BOARD_INFO("adau1361", 0x38),
      },
#endif
#if defined(CONFIG_AD525X_DPOT) || defined(CONFIG_AD525X_DPOT_MODULE)
      {
            I2C_BOARD_INFO("ad5258", 0x18),
      },
#endif
#if defined(CONFIG_SND_SOC_SSM2602) || defined(CONFIG_SND_SOC_SSM2602_MODULE)
      {
            I2C_BOARD_INFO("ssm2602", 0x1b),
      },
#endif
#if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE)
      {
            I2C_BOARD_INFO("ad5398", 0xC),
            .platform_data = (void *)&ad5398_regulator_data,
      },
#endif
#if defined(CONFIG_BACKLIGHT_ADP8860) || defined(CONFIG_BACKLIGHT_ADP8860_MODULE)
      {
            I2C_BOARD_INFO("adp8860", 0x2A),
            .platform_data = (void *)&adp8860_pdata,
      },
#endif
#if defined(CONFIG_SND_SOC_ADAU1373) || defined(CONFIG_SND_SOC_ADAU1373_MODULE)
      {
            I2C_BOARD_INFO("adau1373", 0x1A),
      },
#endif
#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE)
      {
            I2C_BOARD_INFO("ad5252", 0x2e),
      },
#endif
};

#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
static struct resource bfin_sport0_uart_resources[] = {
      {
            .start = SPORT0_TCR1,
            .end = SPORT0_MRCS3+4,
            .flags = IORESOURCE_MEM,
      },
      {
            .start = IRQ_SPORT0_RX,
            .end = IRQ_SPORT0_RX+1,
            .flags = IORESOURCE_IRQ,
      },
      {
            .start = IRQ_SPORT0_ERROR,
            .end = IRQ_SPORT0_ERROR,
            .flags = IORESOURCE_IRQ,
      },
};

static unsigned short bfin_sport0_peripherals[] = {
      P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
      P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0
};

static struct platform_device bfin_sport0_uart_device = {
      .name = "bfin-sport-uart",
      .id = 0,
      .num_resources = ARRAY_SIZE(bfin_sport0_uart_resources),
      .resource = bfin_sport0_uart_resources,
      .dev = {
            .platform_data = &bfin_sport0_peripherals, /* Passed to driver */
      },
};
#endif
#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
static struct resource bfin_sport1_uart_resources[] = {
      {
            .start = SPORT1_TCR1,
            .end = SPORT1_MRCS3+4,
            .flags = IORESOURCE_MEM,
      },
      {
            .start = IRQ_SPORT1_RX,
            .end = IRQ_SPORT1_RX+1,
            .flags = IORESOURCE_IRQ,
      },
      {
            .start = IRQ_SPORT1_ERROR,
            .end = IRQ_SPORT1_ERROR,
            .flags = IORESOURCE_IRQ,
      },
};

static unsigned short bfin_sport1_peripherals[] = {
      P_SPORT1_TFS, P_SPORT1_DTPRI, P_SPORT1_TSCLK, P_SPORT1_RFS,
      P_SPORT1_DRPRI, P_SPORT1_RSCLK, 0
};

static struct platform_device bfin_sport1_uart_device = {
      .name = "bfin-sport-uart",
      .id = 1,
      .num_resources = ARRAY_SIZE(bfin_sport1_uart_resources),
      .resource = bfin_sport1_uart_resources,
      .dev = {
            .platform_data = &bfin_sport1_peripherals, /* Passed to driver */
      },
};
#endif
#endif

#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
#define CF_IDE_NAND_CARD_USE_HDD_INTERFACE
/* #define CF_IDE_NAND_CARD_USE_CF_IN_COMMON_MEMORY_MODE */

#ifdef CF_IDE_NAND_CARD_USE_HDD_INTERFACE
#define PATA_INT  IRQ_PF5
static struct pata_platform_info bfin_pata_platform_data = {
      .ioport_shift = 1,
      .irq_flags = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
};

static struct resource bfin_pata_resources[] = {
      {
            .start = 0x20314020,
            .end = 0x2031403F,
            .flags = IORESOURCE_MEM,
      },
      {
            .start = 0x2031401C,
            .end = 0x2031401F,
            .flags = IORESOURCE_MEM,
      },
      {
            .start = PATA_INT,
            .end = PATA_INT,
            .flags = IORESOURCE_IRQ,
      },
};
#elif defined(CF_IDE_NAND_CARD_USE_CF_IN_COMMON_MEMORY_MODE)
static struct pata_platform_info bfin_pata_platform_data = {
      .ioport_shift = 0,
};
/* CompactFlash Storage Card Memory Mapped Adressing
 * /REG = A11 = 1
 */
static struct resource bfin_pata_resources[] = {
      {
            .start = 0x20211800,
            .end = 0x20211807,
            .flags = IORESOURCE_MEM,
      },
      {
            .start = 0x2021180E,    /* Device Ctl */
            .end = 0x2021180E,
            .flags = IORESOURCE_MEM,
      },
};
#endif

static struct platform_device bfin_pata_device = {
      .name = "pata_platform",
      .id = -1,
      .num_resources = ARRAY_SIZE(bfin_pata_resources),
      .resource = bfin_pata_resources,
      .dev = {
            .platform_data = &bfin_pata_platform_data,
      }
};
#endif

static const unsigned int cclk_vlev_datasheet[] =
{
      VRPAIR(VLEV_085, 250000000),
      VRPAIR(VLEV_090, 376000000),
      VRPAIR(VLEV_095, 426000000),
      VRPAIR(VLEV_100, 426000000),
      VRPAIR(VLEV_105, 476000000),
      VRPAIR(VLEV_110, 476000000),
      VRPAIR(VLEV_115, 476000000),
      VRPAIR(VLEV_120, 500000000),
      VRPAIR(VLEV_125, 533000000),
      VRPAIR(VLEV_130, 600000000),
};

static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
      .tuple_tab = cclk_vlev_datasheet,
      .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
      .vr_settling_time = 25 /* us */,
};

static struct platform_device bfin_dpmc = {
      .name = "bfin dpmc",
      .dev = {
            .platform_data = &bfin_dmpc_vreg_data,
      },
};

#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
static struct platform_device bfin_i2s = {
      .name = "bfin-i2s",
      .id = CONFIG_SND_BF5XX_SPORT_NUM,
      /* TODO: add platform data here */
};
#endif

#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
static struct platform_device bfin_tdm = {
      .name = "bfin-tdm",
      .id = CONFIG_SND_BF5XX_SPORT_NUM,
      /* TODO: add platform data here */
};
#endif

#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
static struct platform_device bfin_ac97 = {
      .name = "bfin-ac97",
      .id = CONFIG_SND_BF5XX_SPORT_NUM,
      /* TODO: add platform data here */
};
#endif

#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
#define REGULATOR_ADP122      "adp122"
#define REGULATOR_ADP122_UV   2500000

static struct regulator_consumer_supply adp122_consumers = {
            .supply = REGULATOR_ADP122,
};

static struct regulator_init_data adp_switch_regulator_data = {
      .constraints = {
            .name = REGULATOR_ADP122,
            .valid_ops_mask = REGULATOR_CHANGE_STATUS,
            .min_uV = REGULATOR_ADP122_UV,
            .max_uV = REGULATOR_ADP122_UV,
            .min_uA = 0,
            .max_uA = 300000,
      },
      .num_consumer_supplies = 1,   /* only 1 */
      .consumer_supplies     = &adp122_consumers,
};

static struct fixed_voltage_config adp_switch_pdata = {
      .supply_name = REGULATOR_ADP122,
      .microvolts = REGULATOR_ADP122_UV,
      .gpio = GPIO_PF2,
      .enable_high = 1,
      .enabled_at_boot = 0,
      .init_data = &adp_switch_regulator_data,
};

static struct platform_device adp_switch_device = {
      .name = "reg-fixed-voltage",
      .id = 0,
      .dev = {
            .platform_data = &adp_switch_pdata,
      },
};

#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
      defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
static struct regulator_bulk_data adp122_bulk_data = {
      .supply = REGULATOR_ADP122,
};

static struct regulator_userspace_consumer_data adp122_userspace_comsumer_data = {
      .name = REGULATOR_ADP122,
      .num_supplies = 1,
      .supplies = &adp122_bulk_data,
};

static struct platform_device adp122_userspace_consumer_device = {
      .name = "reg-userspace-consumer",
      .id = 0,
      .dev = {
            .platform_data = &adp122_userspace_comsumer_data,
      },
};
#endif
#endif

#if defined(CONFIG_IIO_GPIO_TRIGGER) || \
      defined(CONFIG_IIO_GPIO_TRIGGER_MODULE)

static struct resource iio_gpio_trigger_resources[] = {
      [0] = {
            .start  = IRQ_PF5,
            .end    = IRQ_PF5,
            .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
      },
};

static struct platform_device iio_gpio_trigger = {
      .name = "iio_gpio_trigger",
      .num_resources = ARRAY_SIZE(iio_gpio_trigger_resources),
      .resource = iio_gpio_trigger_resources,
};
#endif

static struct platform_device *stamp_devices[] __initdata = {

      &bfin_dpmc,

#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
      &bfin_pcmcia_cf_device,
#endif

#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
      &rtc_device,
#endif

#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
      &sl811_hcd_device,
#endif

#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
      &isp1362_hcd_device,
#endif

#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
      &bfin_isp1760_device,
#endif

#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
      &smc91x_device,
#endif

#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
      &dm9000_device,
#endif

#if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE)
      &bfin_can_device,
#endif

#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
      &bfin_mii_bus,
      &bfin_mac_device,
#endif

#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
      &net2272_bfin_device,
#endif

#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
      &bfin_spi0_device,
#endif

#if defined(CONFIG_SPI_BFIN_SPORT) || defined(CONFIG_SPI_BFIN_SPORT_MODULE)
      &bfin_sport_spi0_device,
      &bfin_sport_spi1_device,
#endif

#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
      &bfin_fb_device,
#endif

#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
      &bfin_lq035q1_device,
#endif

#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
#ifdef CONFIG_SERIAL_BFIN_UART0
      &bfin_uart0_device,
#endif
#ifdef CONFIG_SERIAL_BFIN_UART1
      &bfin_uart1_device,
#endif
#endif

#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
#ifdef CONFIG_BFIN_SIR0
      &bfin_sir0_device,
#endif
#ifdef CONFIG_BFIN_SIR1
      &bfin_sir1_device,
#endif
#endif

#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
      &i2c_bfin_twi_device,
#endif

#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
      &bfin_sport0_uart_device,
#endif
#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
      &bfin_sport1_uart_device,
#endif
#endif

#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
      &bfin_pata_device,
#endif

#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
      &bfin_device_gpiokeys,
#endif

#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
      &bfin_async_nand_device,
#endif

#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
      &stamp_flash_device,
#endif

#if defined(CONFIG_SND_BF5XX_I2S) || defined(CONFIG_SND_BF5XX_I2S_MODULE)
      &bfin_i2s,
#endif

#if defined(CONFIG_SND_BF5XX_TDM) || defined(CONFIG_SND_BF5XX_TDM_MODULE)
      &bfin_tdm,
#endif

#if defined(CONFIG_SND_BF5XX_AC97) || defined(CONFIG_SND_BF5XX_AC97_MODULE)
      &bfin_ac97,
#endif
#if defined(CONFIG_REGULATOR_AD5398) || defined(CONFIG_REGULATOR_AD5398_MODULE)
#if defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER) || \
      defined(CONFIG_REGULATOR_VIRTUAL_CONSUMER_MODULE)
      &ad5398_virt_consumer_device,
#endif
#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
      defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
      &ad5398_userspace_consumer_device,
#endif
#endif

#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
      &adp_switch_device,
#if defined(CONFIG_REGULATOR_USERSPACE_CONSUMER) || \
      defined(CONFIG_REGULATOR_USERSPACE_CONSUMER_MODULE)
      &adp122_userspace_consumer_device,
#endif
#endif

#if defined(CONFIG_IIO_GPIO_TRIGGER) || \
      defined(CONFIG_IIO_GPIO_TRIGGER_MODULE)
      &iio_gpio_trigger,
#endif
};

static int __init stamp_init(void)
{
      printk(KERN_INFO "%s(): registering device resources\n", __func__);
      bfin_plat_nand_init();
      adf702x_mac_init();
      platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
      i2c_register_board_info(0, bfin_i2c_board_info,
                        ARRAY_SIZE(bfin_i2c_board_info));
      spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));

      return 0;
}

arch_initcall(stamp_init);


static struct platform_device *stamp_early_devices[] __initdata = {
#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK)
#ifdef CONFIG_SERIAL_BFIN_UART0
      &bfin_uart0_device,
#endif
#ifdef CONFIG_SERIAL_BFIN_UART1
      &bfin_uart1_device,
#endif
#endif

#if defined(CONFIG_SERIAL_BFIN_SPORT_CONSOLE)
#ifdef CONFIG_SERIAL_BFIN_SPORT0_UART
      &bfin_sport0_uart_device,
#endif
#ifdef CONFIG_SERIAL_BFIN_SPORT1_UART
      &bfin_sport1_uart_device,
#endif
#endif
};

void __init native_machine_early_platform_add_devices(void)
{
      printk(KERN_INFO "register early platform devices\n");
      early_platform_add_devices(stamp_early_devices,
            ARRAY_SIZE(stamp_early_devices));
}

void native_machine_restart(char *cmd)
{
      /* workaround reboot hang when booting from SPI */
      if ((bfin_read_SYSCR() & 0x7) == 0x3)
            bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
}

/*
 * Currently the MAC address is saved in Flash by U-Boot
 */
#define FLASH_MAC 0x203f0000
void bfin_get_ether_addr(char *addr)
{
      *(u32 *)(&(addr[0])) = bfin_read32(FLASH_MAC);
      *(u16 *)(&(addr[4])) = bfin_read16(FLASH_MAC + 4);
}
EXPORT_SYMBOL(bfin_get_ether_addr);

Generated by  Doxygen 1.6.0   Back to index