Logo Search packages:      
Sourcecode: linux version File versions  Download package

eukrea_mbimxsd-baseboard.c

/*
 * Copyright (C) 2010 Eric Benard - eric@eukrea.com
 *
 * Based on pcm970-baseboard.c which is :
 * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
 * MA 02110-1301, USA.
 */

#include <linux/types.h>
#include <linux/init.h>

#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/leds.h>
#include <linux/platform_device.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <video/platform_lcd.h>
#include <linux/i2c.h>

#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>

#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx35.h>
#include <mach/ipu.h>
#include <mach/mx3fb.h>
#include <mach/audmux.h>

#include "devices-imx35.h"
#include "devices.h"

static const struct fb_videomode fb_modedb[] = {
      {
            .name       = "CMO-QVGA",
            .refresh    = 60,
            .xres       = 320,
            .yres       = 240,
            .pixclock   = KHZ2PICOS(6500),
            .left_margin      = 68,
            .right_margin     = 20,
            .upper_margin     = 15,
            .lower_margin     = 4,
            .hsync_len  = 30,
            .vsync_len  = 3,
            .sync       = 0,
            .vmode            = FB_VMODE_NONINTERLACED,
            .flag       = 0,
      },
      {
            .name       = "DVI-VGA",
            .refresh    = 60,
            .xres       = 640,
            .yres       = 480,
            .pixclock   = 32000,
            .left_margin      = 100,
            .right_margin     = 100,
            .upper_margin     = 7,
            .lower_margin     = 100,
            .hsync_len  = 7,
            .vsync_len  = 7,
            .sync       = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT |
                          FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
            .vmode            = FB_VMODE_NONINTERLACED,
            .flag       = 0,
      },
      {
            .name       = "DVI-SVGA",
            .refresh    = 60,
            .xres       = 800,
            .yres       = 600,
            .pixclock   = 25000,
            .left_margin      = 75,
            .right_margin     = 75,
            .upper_margin     = 7,
            .lower_margin     = 75,
            .hsync_len  = 7,
            .vsync_len  = 7,
            .sync       = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT |
                          FB_SYNC_OE_ACT_HIGH | FB_SYNC_CLK_INVERT,
            .vmode            = FB_VMODE_NONINTERLACED,
            .flag       = 0,
      },
};

static struct ipu_platform_data mx3_ipu_data = {
      .irq_base = MXC_IPU_IRQ_START,
};

static struct mx3fb_platform_data mx3fb_pdata = {
      .dma_dev    = &mx3_ipu.dev,
      .name       = "CMO-QVGA",
      .mode       = fb_modedb,
      .num_modes  = ARRAY_SIZE(fb_modedb),
};

static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
      /* LCD */
      MX35_PAD_LD0__IPU_DISPB_DAT_0,
      MX35_PAD_LD1__IPU_DISPB_DAT_1,
      MX35_PAD_LD2__IPU_DISPB_DAT_2,
      MX35_PAD_LD3__IPU_DISPB_DAT_3,
      MX35_PAD_LD4__IPU_DISPB_DAT_4,
      MX35_PAD_LD5__IPU_DISPB_DAT_5,
      MX35_PAD_LD6__IPU_DISPB_DAT_6,
      MX35_PAD_LD7__IPU_DISPB_DAT_7,
      MX35_PAD_LD8__IPU_DISPB_DAT_8,
      MX35_PAD_LD9__IPU_DISPB_DAT_9,
      MX35_PAD_LD10__IPU_DISPB_DAT_10,
      MX35_PAD_LD11__IPU_DISPB_DAT_11,
      MX35_PAD_LD12__IPU_DISPB_DAT_12,
      MX35_PAD_LD13__IPU_DISPB_DAT_13,
      MX35_PAD_LD14__IPU_DISPB_DAT_14,
      MX35_PAD_LD15__IPU_DISPB_DAT_15,
      MX35_PAD_LD16__IPU_DISPB_DAT_16,
      MX35_PAD_LD17__IPU_DISPB_DAT_17,
      MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC,
      MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
      MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
      MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
      /* Backlight */
      MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
      /* LCD_PWR */
      MX35_PAD_D3_CLS__GPIO1_4,
      /* LED */
      MX35_PAD_LD23__GPIO3_29,
      /* SWITCH */
      MX35_PAD_LD19__GPIO3_25,
      /* UART2 */
      MX35_PAD_CTS2__UART2_CTS,
      MX35_PAD_RTS2__UART2_RTS,
      MX35_PAD_TXD2__UART2_TXD_MUX,
      MX35_PAD_RXD2__UART2_RXD_MUX,
      /* I2S */
      MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS,
      MX35_PAD_STXD4__AUDMUX_AUD4_TXD,
      MX35_PAD_SRXD4__AUDMUX_AUD4_RXD,
      MX35_PAD_SCK4__AUDMUX_AUD4_TXC,
      /* CAN2 */
      MX35_PAD_TX5_RX0__CAN2_TXCAN,
      MX35_PAD_TX4_RX1__CAN2_RXCAN,
      /* SDCARD */
      MX35_PAD_SD1_CMD__ESDHC1_CMD,
      MX35_PAD_SD1_CLK__ESDHC1_CLK,
      MX35_PAD_SD1_DATA0__ESDHC1_DAT0,
      MX35_PAD_SD1_DATA1__ESDHC1_DAT1,
      MX35_PAD_SD1_DATA2__ESDHC1_DAT2,
      MX35_PAD_SD1_DATA3__ESDHC1_DAT3,
};

#define GPIO_LED1 (2 * 32 + 29)
#define GPIO_SWITCH1    (2 * 32 + 25)
#define GPIO_LCDPWR     (4)

static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd,
                           unsigned int power)
{
      if (power)
            gpio_direction_output(GPIO_LCDPWR, 1);
      else
            gpio_direction_output(GPIO_LCDPWR, 0);
}

static struct plat_lcd_data eukrea_mbimxsd_lcd_power_data = {
      .set_power        = eukrea_mbimxsd_lcd_power_set,
};

static struct platform_device eukrea_mbimxsd_lcd_powerdev = {
      .name             = "platform-lcd",
      .dev.platform_data      = &eukrea_mbimxsd_lcd_power_data,
};

static struct gpio_led eukrea_mbimxsd_leds[] = {
      {
            .name             = "led1",
            .default_trigger  = "heartbeat",
            .active_low       = 1,
            .gpio             = GPIO_LED1,
      },
};

static struct gpio_led_platform_data eukrea_mbimxsd_led_info = {
      .leds       = eukrea_mbimxsd_leds,
      .num_leds   = ARRAY_SIZE(eukrea_mbimxsd_leds),
};

static struct platform_device eukrea_mbimxsd_leds_gpio = {
      .name = "leds-gpio",
      .id   = -1,
      .dev  = {
            .platform_data    = &eukrea_mbimxsd_led_info,
      },
};

static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
      {
            .gpio       = GPIO_SWITCH1,
            .code       = BTN_0,
            .desc       = "BP1",
            .active_low = 1,
            .wakeup           = 1,
      },
};

static struct gpio_keys_platform_data eukrea_mbimxsd_button_data = {
      .buttons    = eukrea_mbimxsd_gpio_buttons,
      .nbuttons   = ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
};

static struct platform_device eukrea_mbimxsd_button_device = {
      .name       = "gpio-keys",
      .id         = -1,
      .num_resources    = 0,
      .dev        = {
            .platform_data    = &eukrea_mbimxsd_button_data,
      }
};

static struct platform_device *platform_devices[] __initdata = {
      &eukrea_mbimxsd_leds_gpio,
      &eukrea_mbimxsd_button_device,
      &eukrea_mbimxsd_lcd_powerdev,
};

static const struct imxuart_platform_data uart_pdata __initconst = {
      .flags = IMXUART_HAVE_RTSCTS,
};

static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = {
      {
            I2C_BOARD_INFO("tlv320aic23", 0x1a),
      },
};

static const
struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = {
      .flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
};

/*
 * system init for baseboard usage. Will be called by cpuimx35 init.
 *
 * Add platform devices present on this baseboard and init
 * them from CPU side as far as required to use them later on
 */
void __init eukrea_mbimxsd35_baseboard_init(void)
{
      if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
                  ARRAY_SIZE(eukrea_mbimxsd_pads)))
            printk(KERN_ERR "error setting mbimxsd pads !\n");

#if defined(CONFIG_SND_SOC_EUKREA_TLV320)
      /* SSI unit master I2S codec connected to SSI_AUD4 */
      mxc_audmux_v2_configure_port(0,
                  MXC_AUDMUX_V2_PTCR_SYN |
                  MXC_AUDMUX_V2_PTCR_TFSDIR |
                  MXC_AUDMUX_V2_PTCR_TFSEL(3) |
                  MXC_AUDMUX_V2_PTCR_TCLKDIR |
                  MXC_AUDMUX_V2_PTCR_TCSEL(3),
                  MXC_AUDMUX_V2_PDCR_RXDSEL(3)
      );
      mxc_audmux_v2_configure_port(3,
                  MXC_AUDMUX_V2_PTCR_SYN,
                  MXC_AUDMUX_V2_PDCR_RXDSEL(0)
      );
#endif

      imx35_add_imx_uart1(&uart_pdata);
      mxc_register_device(&mx3_ipu, &mx3_ipu_data);
      mxc_register_device(&mx3_fb, &mx3fb_pdata);

      imx35_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);

      imx35_add_flexcan1(NULL);
      imx35_add_sdhci_esdhc_imx(0, NULL);

      gpio_request(GPIO_LED1, "LED1");
      gpio_direction_output(GPIO_LED1, 1);
      gpio_free(GPIO_LED1);

      gpio_request(GPIO_SWITCH1, "SWITCH1");
      gpio_direction_input(GPIO_SWITCH1);
      gpio_free(GPIO_SWITCH1);

      gpio_request(GPIO_LCDPWR, "LCDPWR");
      gpio_direction_output(GPIO_LCDPWR, 1);
      gpio_free(GPIO_LCDPWR);

      i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
                        ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));

      platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
}

Generated by  Doxygen 1.6.0   Back to index