Logo Search packages:      
Sourcecode: linux version File versions  Download package

ts219-setup.c

/*
 *
 * QNAP TS-11x/TS-21x Turbo NAS Board Setup
 *
 * Copyright (C) 2009  Martin Michlmayr <tbm@cyrius.com>
 * Copyright (C) 2008  Byron Bradley <byron.bbradley@gmail.com>
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version
 * 2 of the License, or (at your option) any later version.
 */

#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/i2c.h>
#include <linux/mv643xx_eth.h>
#include <linux/ata_platform.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
#include "common.h"
#include "mpp.h"
#include "tsx1x-common.h"

static struct i2c_board_info __initdata qnap_ts219_i2c_rtc = {
      I2C_BOARD_INFO("s35390a", 0x30),
};

static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = {
      .phy_addr   = MV643XX_ETH_PHY_ADDR(8),
};

static struct mv_sata_platform_data qnap_ts219_sata_data = {
      .n_ports    = 2,
};

static struct gpio_keys_button qnap_ts219_buttons[] = {
      {
            .code       = KEY_COPY,
            .gpio       = 15,
            .desc       = "USB Copy",
            .active_low = 1,
      },
      {
            .code       = KEY_RESTART,
            .gpio       = 16,
            .desc       = "Reset",
            .active_low = 1,
      },
};

static struct gpio_keys_platform_data qnap_ts219_button_data = {
      .buttons    = qnap_ts219_buttons,
      .nbuttons   = ARRAY_SIZE(qnap_ts219_buttons),
};

static struct platform_device qnap_ts219_button_device = {
      .name       = "gpio-keys",
      .id         = -1,
      .num_resources    = 0,
      .dev        = {
            .platform_data    = &qnap_ts219_button_data,
      }
};

static unsigned int qnap_ts219_mpp_config[] __initdata = {
      MPP0_SPI_SCn,
      MPP1_SPI_MOSI,
      MPP2_SPI_SCK,
      MPP3_SPI_MISO,
      MPP4_SATA1_ACTn,
      MPP5_SATA0_ACTn,
      MPP8_TW0_SDA,
      MPP9_TW0_SCK,
      MPP10_UART0_TXD,
      MPP11_UART0_RXD,
      MPP13_UART1_TXD,  /* PIC controller */
      MPP14_UART1_RXD,  /* PIC controller */
      MPP15_GPIO,       /* USB Copy button (on devices with 88F6281) */
      MPP16_GPIO,       /* Reset button (on devices with 88F6281) */
      MPP36_GPIO,       /* RAM: 0: 256 MB, 1: 512 MB */
      MPP37_GPIO,       /* Reset button (on devices with 88F6282) */
      MPP43_GPIO,       /* USB Copy button (on devices with 88F6282) */
      MPP44_GPIO,       /* Board ID: 0: TS-11x, 1: TS-21x */
      0
};

static void __init qnap_ts219_init(void)
{
      u32 dev, rev;

      /*
       * Basic setup. Needs to be called early.
       */
      kirkwood_init();
      kirkwood_mpp_conf(qnap_ts219_mpp_config);

      kirkwood_uart0_init();
      kirkwood_uart1_init(); /* A PIC controller is connected here. */
      qnap_tsx1x_register_flash();
      kirkwood_i2c_init();
      i2c_register_board_info(0, &qnap_ts219_i2c_rtc, 1);

      kirkwood_pcie_id(&dev, &rev);
      if (dev == MV88F6282_DEV_ID) {
            qnap_ts219_buttons[0].gpio = 43; /* USB Copy button */
            qnap_ts219_buttons[1].gpio = 37; /* Reset button */
            qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
      }

      kirkwood_ge00_init(&qnap_ts219_ge00_data);
      kirkwood_sata_init(&qnap_ts219_sata_data);
      kirkwood_ehci_init();
      platform_device_register(&qnap_ts219_button_device);

      pm_power_off = qnap_tsx1x_power_off;

}

static int __init ts219_pci_init(void)
{
      if (machine_is_ts219())
            kirkwood_pcie_init(KW_PCIE0);

      return 0;
}
subsys_initcall(ts219_pci_init);

MACHINE_START(TS219, "QNAP TS-119/TS-219")
      /* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
      .boot_params      = 0x00000100,
      .init_machine     = qnap_ts219_init,
      .map_io           = kirkwood_map_io,
      .init_irq   = kirkwood_init_irq,
      .timer            = &kirkwood_timer,
MACHINE_END

Generated by  Doxygen 1.6.0   Back to index